Professional Documents
Culture Documents
PROCEDURE:
1. Implement the circuit as per the circuit diagram in workspace of Ltspice.
2. Take sinusoidal input signal of fixed amplitude and apply it to the amplifier circuit.
3. Vary the frequency of the source and measure the output voltage.
4. Find frequency response of amplifier circuits with reference to observation table I.
5. Plot frequency response and find lower cut-off frequency, upper cut-off frequency,
voltage gain.
6. Connect at least two different bypass capacitors and repeat above process.
Circuit Diagram:
Observation Table
Department of Electronics and Telecommunication Engineering
Lower cut off Upper cut off O/P Voltage Gain Bandwidth
frequency frequency Vo (Vo/Vs)
Th Pr Th Pr Th Pr
Without bypass 70.834 57.62 743.6 17.14 0.142 32.88 0.713 17.13M
Capacitor k m 6
With bypass 132.62 12.87 743.3 713.1 6.577 32.88 32.88 713.069k
capacitor = 100u F 6 9k 8 9
With bypass 13.15k 10.66 743.6 727.3 6.576 32.88 32.88 714.51k
capacitor = 1uF k k
Theoretical Calculations
Lower cut-off frequency, higher cut-off Frequency, mid band voltage gain
Conclusion: We learnt from this experiment that without bypass capacitor the gain is
very less. As the value of capacitance increases, the bandwidth increases.