Professional Documents
Culture Documents
DM 51755 v1
Daily Check ROI Instruction Manual
DM 51755 v1
This page intentionally left blank.
Copyright © 2008 by Hitachi Medical Systems America, Inc. All rights reserved.
Conventions
Symbols
CAUTION: This symbol indicates possible danger that could result in light or moderate injury, partial
equipment damage, or computer data loss.
WARNING: This symbol indicates an indirect danger that could result in death, serious injury, or serious
property damage such as fire or total loss of equipment.
PROHIBITED: This symbol indicates prohibited conditions or actions. The description in combination
with this symbol indicates conditions or actions that are prohibited.
NOTE: is symbol indicates any recommended procedure, condition, or action that requires care when
operating the equipment.
DM 51755 v1
i
Daily Check ROI Instruction Manual
Copyright © 2008by Hitachi Medical Systems America, Inc. All rights reserved. ii
Revision History
Manual Revision
DOCUMENT REVISION REVISION DATE DOCUMENT NUMBER DCO# EFFECTIVE PAGES
Software Revision
This manual supports system software Version 1.01
DM 51755 v1
iii
Daily Check ROI Instruction Manual
Copyright © 2008by Hitachi Medical Systems America, Inc. All rights reserved. iv
Table of Contents
Conventions...................................................................................................................................... i
Revision History ............................................................................................................................. iii
Table of Contents ............................................................................................................................ v
Introduction ................................................................................................................................... vii
Essential Prescribing Information ............................................................................................vii
Trademark and Registered Trademarks..................................................................................vii
Notation of Product Names .....................................................................................................vii
Distributor ................................................................................................................................vii
Manufacturer ..........................................................................................................................viii
Chapter 1 – Outline ......................................................................................................................... 1
1.1 Daily Check ROI functions..................................................................................................1
Chapter 2 – Starting and Stopping Daily Check ROI.................................................................... 3
2.1 Starting ............................................................................................................................... 3
2.2 Stopping ............................................................................................................................. 3
Chapter 3 – Operating Daily Check ROI ........................................................................................ 5
3.1 Setting Up ROIs.................................................................................................................. 6
3.2 Saving ROI Information ...................................................................................................... 8
3.3 Procedures for Performing Operations on ROIs................................................................. 8
3.3.1 Enlarging or Reducing ROIs ................................................................................... 8
3.3.2 Moving ROIs ........................................................................................................... 9
3.3.3 Pasting ROIs......................................................................................................... 10
3.3.4 Deleting ROIs ....................................................................................................... 10
3.3.5 Resetting ROIs ..................................................................................................... 10
Chapter 4 –ROI Setting Processing Results Window ................................................................ 11
Chapter 5 – Supplementary Notes on ROI Settings ................................................................... 13
DM 51755 v1
v
Daily Check ROI Instruction Manual
Copyright © 2008 by Hitachi Medical Systems America, Inc. All rights reserved. vi
Introduction
This manual explains the Daily Check ROI for the Hitachi whole-body X-ray CT system, ECLOS.
To maintain normal performance for a long period, it is essential to have a full understanding of the functions,
operation, and maintenance of the system. Read the instruction manuals on Systems, Imaging Analysis and
Radiography thoroughly before using this system. After reading the manuals keep them in a location near the
system for easy reference.
Windows is a trademark and registered trademark of Microsoft Corporation in the United States of America
and/or other countries.
Other company names and product names appearing in this manual are the trademarks or registered
trademarks of those companies.
Distributor
Hitachi Medical Systems America, Inc.
1959 Summit Commerce Park
Twinsburg, Ohio 44087 USA
Tel: 330.425.1313 800.800.3106
Fax: 330.425.1410
http://www.hitachimed.com
DM 51755 v1
vii
Daily Check ROI Instruction Manual
Manufacturer
Hitachi Medical Corporation
Hitachi Kamakurabashi Bldg.
1-1-14 Uchi-Kanda
Chiyoda-Ku, Tokyo 101-0047 JAPAN
Tel: 81.3.3294.3851
Fax: 81.3.3294.3860
Copyright © 2008 by Hitachi Medical Systems America, Inc. All rights reserved. viii
Chapter 1 - Outline
NOTE:
Usually no more than 4 ROIs can be set under standard ROI settings. In Daily Check
ROI, a maximum of 6 ROIs can be set for each image.
DM 51755 v1
1
Daily Check ROI Instruction Manual
Copyright © 2008. Hitachi Medical Systems America, Inc. All rights reserved. 2
Chapter 2 - Starting and Stopping
Daily Check ROI
2.1 Starting
1 In the Image Viewer menu, click Daily Check ROI in Analyze, or click
the Daily Check ROI button in the tool bar.
The Daily Check dialog box is displayed.
If another analysis application is running when Daily Check ROI starts, a dialog box
is displayed and asks whether you want to execute Clear Analysis.
2.2 Stopping
1 In the Daily Check ROI dialog box, click Close.
When you do this, all ROIs set on the screen are deleted.
DM 51755 v1
3
Daily Check ROI Instruction Manual
Copyright © 2008. Hitachi Medical Systems America, Inc. All rights reserved. 4
Chapter 3 - Operating Daily Check
ROI
You can perform operations on ROI settings in the following dialog box. The characters with lines
pointing to parts of the figure are referenced in the procedures written later in this chapter (for
example, by phrases like "A in the figure" or "B in the figure").
B F B: (Ellipse) button
C: Transparent checkbox
E: Delete button
H: Draw button
I: Save button
C
J: Select All button
H
K: Paste button
D
I
L: Close button
J
K M: Reset button
E L
DM 51755 v1
5
Daily Check ROI Instruction Manual
1 Click the (Ellipse) button (B in the figure), and then draw the ROI.
2 Using the Default ROI, Modified ROI option button (D in the figure), select Default ROI, and
then draw the ROI.
3 Using the Default ROI, Modified ROI option button (D in the figure), select Modified ROI,
and then draw the ROI.
(1) Click the (Ellipse) button (B in the figure), and then draw the ROI.
[Procedure]
Ⅰ In the Daily Check ROI dialog box, click the button(the (Ellipse) button, B in the
figure).
The button changes to a plus mark (+).
Drag
(2) Using the Default ROI, Modified ROI option button (D in the figure), select Default ROI, and
then draw the ROI.
Using this method, you can set a maximum of 6 ROIs in preset locations on the ROI.
[Procedure]
Ⅰ Using the Default ROI, Modified ROI option button (D in the figure), select Default ROI.
Ⅱ Click the Draw button.
Six ROIs are set in preset locations on the first frame image.
Copyright © 2008. Hitachi Medical Systems America, Inc. All rights reserved. 6
HINT:
ROIs with radius of 30 pixels are set in the following locations on the original figure.
A to F indicate the ROI figure numbers.
(3) Using the Default ROI, Modified ROI option button (D in the figure), select Modified ROI,
and then draw the ROI.
Using this method, on an image you can reset user-saved ROI information. (For details on how
to save ROI information, see "3.2 Saving ROI Information".)
[Procedure]
Ⅰ Using the Default ROI, Modified ROI option button (D in the figure), select Modified
ROI.
Ⅱ Click the Draw button.
The saved ROI settings are loaded, and the ROIs are set on the first frame image.
y Clicking the Draw button enables you to set an ROI in the first frame only.
y When you click the Draw button and the total number of ROIs in the first frame
and loaded ROIs exceeds the maximum (6), a dialog box is displayed and asks
about the drawing method.
DM 51755 v1
7
Daily Check ROI Instruction Manual
If the maximum number (6) of ROIs is exceeded while using Method 2 or Method 3, the
following dialog box is displayed.
Copyright © 2008. Hitachi Medical Systems America, Inc. All rights reserved. 8
1 When you place the pointer on an ROI line, the pointer changes to . In
this state, click the ROI. When you do so, □handles will appear and are
selected. By dragging in bi-directional arrow, you can enlarge or reduce
the ROI.
DM 51755 v1
9
Daily Check ROI Instruction Manual
3 Click the frame where you want to paste the ROI. The selected ROIs are
pasted.
While multiple images containing ROIs that you want to paste are selected, pasting is
not possible.
You cannot paste ROIs to the image containing the original ROIs to be pasted.
Copyright © 2008. Hitachi Medical Systems America, Inc. All rights reserved. 10
Chapter 4 - ROI Setting Processing
Results Window
ROI information set on the window is displayed in the ROI display area (G in the figure) of the Daily
Check ROI dialog box.
* The characters are for identifying the ROI. The first ROI is A, and the second is changed to
B, the third to C, and so on (in order).
HINT:
When multiple images are selected, processing results are not displayed.
DM 51755 v1
11
Daily Check ROI Instruction Manual
Copyright © 2008. Hitachi Medical Systems America, Inc. All rights reserved. 12
Chapter 5 - Supplementary Notes on
ROI Settings
Restrictions:
z ROI shapes are ovals only.
z The maximum number of ROIs that can be displayed on one image is 6.
z Bitmap files are not subject to processing.
DM 51755 v1
13
Daily Check ROI Instruction Manual
Copyright © 2008. Hitachi Medical Systems America, Inc. All rights reserved. 14