Honeywell Pim E00 Dy Set tt St bbe sss
3. Controllers
INTRODUCTION
This section describes the different functions of the MC-800 cursor
control device (CCD) for the Primus Elite DU. These descriptions are
provided to familiarize the pilot with the controller.
MC-800 CCD
The MC-800 CCD is shown in Figure 3-1. The MC-800 controls the
enhanced information displayed on the MFD.
MAP |) CHART
Urey ui)
Figure 3-1
MC-800 CCD (Pilot Side)
The MC-800 functions are described in the following paragraphs.
Map Button - A short cut to selecting the geopolitical
map with uplink weather overlay is accomplished by
pushing the MAP button on the MC-800.
TOS7Se06
Chart Button - A short cut to selecting the charts
function is accomplished by pushing the CHART
button on the MC-800.
DSTSee7
Joystick - The joystick controls different aspects of
the display unit:
1D-575488
* Dropdown menus for MFD, chart, map, video,
and maintenance functions
* Cursor.
0201408000042 Controllers
REVO Apr 2016 a‘rms ens’ uspay ys — Nerou Supplement re Homearer Lich Express SOOO Honeywell
MENU Button - When in legacy mode, pushing the
MENU button on the MC-800 displays the onscreen
MFD menu buttons. In addition, when the pilot is
viewing either the video, charts, enhanced map, display
unit maintenance, pushing the MENU button exits the enhanced mode
to the legacy mode display.
MFD Button - Pushing the MFD button exits the
Memes enhanced mode to the legacy mode display.
Pieter tia) DATA SET Knob - The MC-800 DATA SET knob
is concentric. Turning the knob gives the pilot
the ability to zoom in or out of the selected view
on the MFD.
Pushing the PUSH TO ENTER button selects the button or function
highlighted by the cursor on the MFD.
eo
4
DSTSIO5
TOS7SE00
1OSTSEOH
When an AIRMET (airmen’s meteorological information), SIGMET
(significant meteorological information), METAR, TAF or TFR (growth)
is displayed and the text does not fit in the text box, the PUSH TO
ENTER button is used to scroll through the text.
When an AIRMET or SIGMET is highlighted, turning the DATA SET
Knob one click highlights the neighboring AIRMET or SIGMET.
MFD Cursor
Es Cursor - The MFD cursor is displayed in yellow and is
‘ moved by the joystick to highlight the desired button or
function to be selected.
Cursor with Halo - When the cursor controller is
initially moved after the cursor is inactive, a gray
halo is momentarily displayed around the cursor
to aid the pilot in quickly locating the cursor on the
MFD.
Controllers 201408000042
32 REVO Apr 2016MFD Menu Buttons
The MFD menu buttons are displayed on the right side of the MFD
plan page in legacy mode when the MENU button on the MC-800 is
selected. The MFD menu buttons, shown in Figure 3-2, are described
in the following paragraphs.
MFO MENU BUTTONS
\
1D579578
Figure 3-2
MFD Menu Buttons on Plan Page in Legacy Mode
CHART Menu Button - Selecting the [[fx/\iil) button on the MFD
menu displays Jeppesen terminal charts on the MFD. The charts
pages are discussed in detail in Section 5, Multifunction Display (MFD)
Charts.
MAP Menu Button - Selecting the [[i/V3J button on the MFD menu
displays the enhanced map, which displays uplinked weather products
and TCAS overlay. The map pages are discussed in detail in Section
6, Multifunction Display (MFD) Enhanced Map.
VIDEO Menu Button - Selecting the {7/2)={9) button on the MFD menu
displays the Video page on the MFD. The video page is discussed in
detail in Section 7, Video.
0201408000042 Controllers
REVO Anr 2016 3-3"Uy St «ett Suomen ie Basar Bal Epes O0¥RS Honeywell
MAINT Menu Button - Selecting the [JI button on the MFD menu
displays the Maintenance page, which appears on all on-side DUs
when selected. This button is selectable only when aircraft weight-on-
wheels (WOW) indicates on-ground. When airborne, (EM is grayed
out and is not selectable. The DU maintenance Pages are discussed in
detail in Section 8, Display Unit (DU) Maintenance Pages.
Controllers 0201408000042
34 REVO Apr 2016