Professional Documents
Culture Documents
Features
• 4 Selectable & Configurable Detector Settings
• Large Backlit LCD for Ease of Reading
• Autoranging
• Rate, Max, and Count Modes of Operation
• Splash-Resistant Construction for Outdoor Use
• 4-Button Intuitive Interface for Easy Operation
• All-Digital Calibration
• USB Port
• Lighter Weight and Ruggedly Built
• Datalogging and Headphone Options
Introduction
The Model 3001 is a durable, lightweight instrument designed for alpha, beta, or gamma radiation survey. It can support up to
four external detectors, each with its own set of calibration and user parameters. The instrument features a large, easy-to-read
LCD screen and audible alarms and is controlled using a simple five-button interface. The unit body is made of high-impact
plastic and splash resistant construction allows the instrument to be used outdoors.
Three modes of operation are available – RATE, MAX, and COUNT – which can be selected by pressing the MODE button.
Measurements can be collected in two sets of units (primary and secondary) for RATE and MAX modes in cps, cpm, Bq, dpm,
mR/h, or µSv/h units. The user can switch between the two sets of units by pressing the UNITS button. The DETECTOR button
is used to switch between the active detector settings, indicated by the colored LEDs above the control buttons. When enabled
with the optional Lumic Data Logger Kit (PN: 4498-1019), data can be logged in any of the operational modes using the LOG
button on the handle. Up to 1000 data points can be stored internally.
Instrument setup can be done either through the front-panel controls or via the Lumic Calibration Kit (PN: 4498-1018). The Model
3001 is shipped ready to use with batteries and a calibration certificate.
Options:
Lumic Calibration Kit (PN 4498-1018): Includes software and required cable. Lumic Calibration Software allows reading and
writing of important instrument parameters via a USB port.
Lumic Data Logger Kit (PN 4498-1019): Includes software and required cable. Lumic Data Logger Software is required to use
instrument data logging features.
Bluetooth® Option (4498-1024): Wirelessly connects the instrument with an Android or iOS mobile device.