Professional Documents
Culture Documents
Weaving MC Maintenance Procedure
Weaving MC Maintenance Procedure
1. Cleaning –
During weaving fly of fiber on the machine will be gathered on the machine.
This fly will hamper the smooth running of the machine.
These fly of fibers should be cleaned.
2. Replacement –
After smooth running there will be possibility of damage on broken of machine parts. In air
jet machine nozzles and some other parts may be damaged because of the high speed
rotation.
Hence, the damaged or broken parts should be replaced.
3. Overhauling –
After several days of production the over hauling is performed. Over hauling is performed by
a skilled maintenance personnel, maintenance is done in every frictional points, every
damaged parts will replaced by a new parts.
4. Greasing –
There are so many frictional points in the machine during high speed rotation there is decay
of rotating parts and heat may procedure.
5. Oiling –
In air jet machine there are so many gear boxes. Those gears are impregnated in the oil bath.
During rotation there will be produce heat.
After a certain cycle of production the maintenance of machine is must. The maintenance is
performed during downtime.
So we must do maintenance for our better production. By maintenance the machine after
certain time the production will be increased.