Professional Documents
Culture Documents
ABBREVIATIONS
Slst – slip stitch
Sc – single crochet
Hdc – half double crochet
Inc – increase (2 single crochet stitches in one stitch)
Dec- decrease
Ch – chain, followed by a number indicating the number of chains to make
RESOURCES&NOTES
• Worsted weight yarns (one skein of each) with E/3.5mm&G/4mm hooks: Bernat Super Value
“Hot Blue”, Craft Smart “Light Grey” & “Off White”
• Reading patterns: https://www.sheacrochet.com/post/reading-patterns
• All parts worked in rounds are worked in continuous rounds (unless otherwise stated)
• Finished size = 10.5 inches tall x 11 inches long x 10.5 inches wide with 3&E/3.5mm crochet hook
• Gauge = not overly important, 5 sc x 5 rounds = one inch with E/3.5mm crochet hook
PURCHASE POLICIES
You are welcome to sell items made from this pattern on a small scale, as long as credit for the design is
provided as “Pattern by Shea Crochet”.
Lapras belongs to Nintendo.
You may not redistribute, sell, or claim this pattern in whole, or in part, as your own.
2
HEAD
**Make the first piece before making the second piece
Piece One:
*Made with teal & E/3.5mm crochet hook
**Half circle – worked in rows – do not slip stitch to join
after making the magic ring
3
Piece two:
*Starting in cream with E/3.5mm crochet hook
*Worked in continuous rounds
4
18. 2 sc, dec, *4 sc, dec* x 5, 2 sc (30)
19. *dec, 3 sc* x 6 (24)
Add stuffing to the head.
20. sc, dec, *2 sc, dec* x 5, sc (18)
21. *sc, dec* x 6 (12)
22. decreaase six times (6)
Fasten off, leaving a tail.
Weave the tail through the front loops of the remaining stitches & pull to close the ring.
CURLS
*Make two in teal with 3mm crochet hook
5
HORN ON HEAD
*Made in teal with 3mm crochet hook
BODY
*Starting in teal with E/3.5mm crochet hook
**Worked in continuous rounds
Before making the body, cut a piece of plastic wrap & place poly beads in the middle. Pull the
corners towards the top to form a little pouch & tape around it. Cut the ends off & add tape around
the piece.
6
4. *2 sc, inc* x 6 (24)
5. *3 sc, inc* x 6 (30)
6. *4 sc, inc* x 6 (36)
7. *5 sc, inc* x 6 (42)
8. *6 sc, inc* x 6 (48)
9. *7 sc, inc* x 6 (54)
10. *8 sc, inc* x 6 (60)
11. *9 sc, inc* x 6 (66)
12. *10 sc, inc* x 6 (72)
13-21. sc in each stitch (72)
Change colour to cream & continue:
22. *10 sc, dec* x 6 (66)
23. *9 sc, dec* x 6 (60)
24. *8 sc, dec* x 6 (54)
25. *7 sc, dec* x 6 (48)
26. *6 sc, dec* x 6 (42)
27. *5 sc, dec* x 6 (36)
Add stuffing to the body. Place the poly beads towards the back of the body (where the colour
change is made). Keep the bottom of the body as flat as possible.
28. *4 sc, dec* x 6 (30)
29. *3 sc, dec* x 6 (24)
30. *2 sc, dec* x 6 (18)
31. *sc, dec* x 6 (12)
32. decrease six times (6)
Fasten off, leaving a tail. Weave the tail through the front loops of the remaining stitches & pull
to close the ring.
NECK
*Made in teal with E/3.5mm crochet hook
1. Chain 7. Starting from the second chain from the hook, sc 6, chain one & turn (6)
2. *sc, inc* x 3, chain one & turn (9)
3. *2 sc, inc* x 3, chain one & turn (12)
4. *3 sc, inc* x 3, chain one & turn (15)
7
5. *4 sc, inc* x 3, chain one & turn (18)
6-8. Sc in each stitch, chain one & turn (18)
9. Inc, 16 sc, inc, chain one & turn (20)
10. Inc, 18 sc, inc, chain one & turn (22)
11-12. 22 sc, chain one & turn (22)
Joining to form a round:
13. 22 sc, chain 11, slip stitch to first sc to form a
round (33)
14. Chain one. Sc in the same stitch as the slip stitch,
sc in the rest of the stitches & chains (33)
15. Working in continuous rounds (without slip
stitching to join): sc in each stitch (33)
16. Sc in each stitch (33)
17. *9 sc, dec* x 3 (30)
18. Sc in each stitch (30)
19. 4 sc, dec, *8 sc, dec* x 2, 4 sc (27)
20. Sc in each stitch (27)
21. *7 sc, dec* x 3 (24)
22-23. Sc in each stitch (24)
24. 3 sc, dec, *6 sc, dec* x 2, 3 sc (21)
25-29. Sc in each stitch (21)
*sc in the first 6 stitches & start round 30 in the
seventh stitch from round 29.
30-31. 11 sc, 10 hdc (21)
32. hdc, 11 sc, 9 hdc (21)
33. Slip stitch in the first 9 stitches (9)
Fasten off, leaving a tail to sew to the head.
8
Working along the opposite side of the foundation chain from row one: 6 sc.
Turn so you are working along the edge/side of the piece & make 11 sc. Slip stitch to the first
stitch (39)
Fasten off, leaving a long tail to sew to the body.
Border:
34. Chain one (counts as a stitch for sewing) & turn so you are working along the edge/side of
the rows: make 31 sc up the side.
9
Along the opposite side of the foundation chain from row one: inc, 3 sc, inc (second picture).
Turn so you are working down the other edge/side of the rows & make 32 sc.
Slip stitch to the first stitch from row 33 (71)
Fasten off, leaving a very long tail to sew to the neck. The tail at the beginning will be sewed to
the head.
TAIL
*Make one in cream & one in teal
**Make the cream piece before making the teal piece
**Made with E/3.5mm crochet hook
1. Chain 2, sc one in the second chain from the hook, chain one & turn (1)
2. Make 3 sc in the same stitch, chain one & turn (3)
3. Sc in each stitch, chain one & turn (3)
10
4. Increase in each stitch, chain one & turn (6)
5. Sc in each stitch, chain one & turn (6)
6. *2 sc, inc* x 2, chain one & turn (8)
7. Sc in each stitch, chain one & turn (8)
8. *inc, 3 sc* x 2, chain one & turn (10)
9. Sc in each stitch, chain one & turn (10)
10. Inc, 8 sc, inc, chain one & turn (12)
11. Sc in each stitch (12)
12. Chain one (counts as a stitch) & turn so you are
working along the edge/side of the rows to create a
border around the piece. Make 8 sc down the
edge/side of the rows.
On the opposite side of the foundation chain from row one, make 3 sc.
Turn so you are working along the other edge/side of the rows & make 9 sc.
Slip stitch to the first stitch from row 11 (21)
Cream piece: fasten off, leaving a tail to sew to the body.
Teal piece: repeat rows 1-12 of front flipper & then continue to row 13.
13. Chain one. Holding the cream piece in front of the teal piece: insert crochet hook through
the slip stitch made at the beginning of row 12 on the cream piece & the last stitch made on
row 12 of the teal piece. Sc in each stitch through both pieces this way (21)
Fasten off teal piece, leaving a tail to sew to the body.
11
FRONT FLIPPERS
*Make two front flippers with E/3.5mm crochet hook
– each flipper has a cream piece & a teal piece
**Make the cream piece before making the teal piece
12
Teal piece: repeat rows 1-24 of front flipper & then continue to row 25.
13. Chain one. Holding the cream piece in front of the teal piece: insert crochet hook through
the slip stitch made at the beginning of row 24 on the cream piece & the last stitch made on
row 12 of the teal piece. Sc in each stitch through both pieces this way (45)
Fasten off teal piece, leaving a tail to sew to the body.
BACK FLIPPERS
*Make two back flippers with E/3.5mm crochet hook
– each flipper has a cream piece & a teal piece
**Make the cream piece before making the teal piece
13
Teal piece: repeat rows 1-16 of front flipper & then continue to row 17.
17. Chain one. Holding the cream piece in front of the teal piece: insert crochet hook through
the slip stitch made at the beginning of row 16 on the cream piece & the last stitch made on
row 12 of the teal piece. Sc in each stitch through both pieces this way (29)
Fasten off teal piece, leaving a tail to sew to the body.
SHELL
*Made in grey with E/3.5mm crochet hook
**Made as a half circle – starting with a magic ring &
worked in rows, not rounds
14
EDGE OF SHELL&SHELL SPIKES
*All pieces made in grey
Edge of shell:
Made with E/3.5mm crochet hook
1. Chain 75. Starting in the second chain from the
hook, sc 74 across, chain 1, turn (74)
2-4. 74 sc, chain 1, turn (74)
Fasten off, leaving a really long tail. Sew the last row
to the foundation chain using a whip stitch.
15
2. increase in each stitch (8)
3. Working in the back loop only: sc in each stitch (8)
4. No longer working in the back loop: sc in each stitch (8)
5. sc in each stitch (8)
Fasten off, leaving a tail to sew to the shell. Add stuffing to the spikes.
ASSEMBLY
• Sew the neck to the body. The top part of
the neck should sit between rounds 9&10 of
the body. The bottom part of the neck
should sit between rounds 21&22.
• Add stuffing to the neck.
• Pin the cream piece onto the front of the
neck. The bottom of it should sit between
rounds 22&23 of the body. The first 3~ rows
of the piece should be sewed to the body &
the rest of the rows to the neck.
• Sew the cream neck piece on by sewing
around the posts of the stitches.
• Weave the tail left at the beginning of the neck piece up through the first stitch made
on the opposite side of the foundation chain – this tail will be used to sew the cream
piece to the head.
16
• Weave the tail left on the first piece of the head through to the other side of the head
(see image). Using this tail & working around the posts of the stitches, sew the piece to
the head. The magic ring at the beginning of the piece should sit over top of the magic
ring on the second piece of the head.
17
• Sew the edge of the shell around the edges/sides of the rows & last row of the shell by
working around the whip stitches made when the edge of the shell was sewed together
(see images below).
• When finished sewing the edge on the shell, sew the two ends of the edge together.
18
• Using the tail left the beginning of the shell
piece, sew the shell to the body by working
around the posts of the stitches on both the
shell & body. Not every stitch needs to be
sewed – just enough to keep the shell in
place.
• Pin the tail to the back of the body.
• Using the cream tail, sew the cream part of
the tail between rounds 22&23 of the body.
Using the blue tail, sew the blue portion of
the tail to the blue portion of the body – it
should sit between rounds 21&22 to between
rounds 17&18 of the body.
• Add stuffing to the tail as it sewed on.
• Pin the front flippers to the front of the body,
they should sit on either side of the neck.
Using the same method as the tail (sewing
the cream & blue parts down separately), sew
the flipper to the body.
The top part of the blue portion of the front
flippers should sit between rounds 19&20 of
the body.
• Add stuffing to the ends of the front
flippers as they are sewed on.
• Pin the back flippers to the body. They
should sit approximately 9~ stitches behind
each of the front flippers.
Using the same method as the tail & front
flippers, sew the back flippers to the body.
The tops of the blue portion of the back
flippers should sit between rounds 19&20
of the body.
19
• Add stuffing to the ends of the back flippers as
they are sewed on.
• Sew the horn to the top of the head – it should
sit between rounds 9&10 to between rounds
12&13 of the first piece made on the head, in
the center of the piece.
• Using the tail left at the beginning of the curl
pieces, curl the pieces by sewing around the
posts of the stitches between rounds 2&3.
• Skip several rounds & continue to curl the
piece until you reach the last 2-3 rounds.
20
• Using white felt & the image below, cut the backs of the eyes out of the white felt.
• Using black felt & the image below, cut the second largest piece for the eyes out of the
black felt.
• Glue the black piece to the white piece.
• For the small part of the eyes, you can use acrylic paint or white felt. If using felt, glue
the pieces to the eyes.
21
CONGRATULATIONS!
YOUR LAPRAS IS FINISHED!
22