Professional Documents
Culture Documents
Unit III
1. Derive the expression for the input impedance of the dissipation less line and the expression
for the input impedance of a quarter wave line. Also discuss the application of quarter wave
line?
2. Explain double stub matching on a transmission line and derive the expression and the length
of the stub used for matching on a line.
3. With a neat sketch explain the formation of constant r- circles and x- Circles of Smith Chart.
4. Design quarter wave, half wave and Eight wave line transformer to the transmission line.
5. Design a single stub match for a load of 150+j225 ohms for a 75 ohms line at 500 MHz using
smith chart.
Unit IV
1. Explain the transmission of Transverse Electric waves between parallel perfectly conducting
planes with necessary expressions and diagrams for field components.
2. Deduce the expressions for the field components of TM waves guided along a rectangular wave
guide
3. Derive the expressions for TM wave components in circular wave guides using Bessel function.
4. A rectangular air-filled copper guide with 0.9inch x 4 inch cross section and 12inch length is
operated at 9.2GHz with a dominant mode. Find the cut-off frequency, guided wavelength, cut
off wavelength the phase velocity, the group velocity and the characteristics impedance.
5. Deduce the expressions for the field components of TM waves guided along a rectangular cavity
resonator.
Unit V
1. Explain the process to compute the junction capacitance and the space charge region length of a
pn junction semiconductor device.
2. Elaborate the construction and the functionality of the bipolar junction transistor.
3. Derive the drain saturation voltage and maximum saturation current for a field effect transistor.
4. Obtain the expression for unilateral power gain with necessary signal flow diagram.
5. Illustrate the design principles of RF amplifier and impedance matching with necessary diagrams.
6. (a) Write about the method used to design an integer N frequency synthesizer.
(b) Determine the transfer function of a voltage controlled oscillator.
Questions Are Expected for University Exams This May or may Not Be Asked for Exams
Please do not Copy (or) Republish This Questions, Students if You Find the Same Questions in
Oter Sources, Kindly report us to rejinpaulteam@gmail.com