Professional Documents
Culture Documents
Vessel Particulars
I. FORE PART
A. BOTTOM STRUCTURE
Pt. B, Chapter 11, Section 1 p. 413
PLATING
In General :
t = 1.0 [ (0.0.3 x 300) + 5.5] (0.72) 1/2
-0
t = 12.303 mm
USE 13 mm
Inner Bottom :
t = 2 + [ 0.017 x 300 x (0.72) 1/2
] + (4.5 x 0.6)
t = 9.027 mm
USE 10 mm
* Inner bottom net thickness to be increased by 2mm unless it is protected by a Continuous Wooden Ceiling
PLATE THICKNESS FOR PONTOON BARGE
PLATING
t = 9.1 mm
USE 10 mm
PLATING
t = 12.303 mm
USE 13 mm
D. DECK PLATING
Pt. B, Chapter 11, Section 5 p. 441
PLATE THICKNESS FOR PONTOON BARGE
PLATE THICKNESS FOR PONTOON BARGE
√(196.133/(1 𝑥
0.95𝑥 355))
t= 0.0158 x 0.791 x 600
t = 5.717 mm
USE 6 mm
LOCATION THICKNESS
BOTTOM PLATE 13.00 mm
INNER BOTTOM PLATE 10.00 mm
SIDE SHELL PLATE 13.00 mm
DECK PLATE 6.00 mm