You are on page 1of 3

2015-12-9 1/3

Firmware upgrade manual

1. Equipment: USB to RS232 Cable, Laptop

2. Software: ShineBus.exe

3. Process:
Before operating, please turn off AC switch, and turn on DC switch

Step1 Install the program “ShineBus” in your computer and connect the inverter to your computer via
USB to RS232 cable. Normally the cable should be used only if successful to install the corresponding
driver.

PV Panel
Growatt Inverter Grid

USB to RS232 Cable

PC

Figure 1 Connect PC to Inverter via USB to RS232 cable

Step2 Query the Com port address of your computer.


(1) Open the device manager of computer.

(2) Find out the com port address as Figure 2.

SHENZHEN GROWATT NEW ENERGY CO., LTD Tel:+8675527472079


12 Building,Xicheng Industrial Zone, Fax:+8675527491460
Bao'an District, Shenzhen 518102,China www.ginverter.com
2015-12-9 2/3

Figure 2 Query com port address

Step3 Read info of inverter


(1) Double click ShineBus in your computer.
(2) After opening the software, click Menu1(Device Info), fill the com port address with what you
find out in Device Manager, fill the Inv Add this is your inverter COM port, you can get it from the
inverter display on LCD by knock one by one. The Inv Add default is 1. Then click “Start”, you will
see some info of your inverter. Record the Device Mode and Serial No.

Figure 3 Device Info

SHENZHEN GROWATT NEW ENERGY CO., LTD Tel:+8675527472079


12 Building,Xicheng Industrial Zone, Fax:+8675527491460
Bao'an District, Shenzhen 518102,China www.ginverter.com
2015-12-9 3/3

Step4 Upgrading

(1)Click Menu 6 (FW Update), click “Browse” to browse firmware I have sent to you as attached .
(2)Click ‘Update”, the “Op State” will show the state of upgrading. The “Op Step” will show the
upgrading percentage.
(3) If the upgrading is finished, the “Op State” will show “Update OK”. Then the inverter will reboot.

Figure 4 Upgrading
(4)After the FW update, please reset the inverter Model and SerialNo as below picture what you have
record before .

SHENZHEN GROWATT NEW ENERGY CO., LTD Tel:+8675527472079


12 Building,Xicheng Industrial Zone, Fax:+8675527491460
Bao'an District, Shenzhen 518102,China www.ginverter.com

You might also like