Professional Documents
Culture Documents
10 KWp ON GRID
SUN INTERNATIONAL
(COMPLETE SOLAR ENERGY SOLUTION)
AUTHORISED EXIDE INTEGRATOR
REGD.OFFICE- 112/1,2nd floor,Oberoi Tower,Arya Nagar
KANPUR-208002
CORPORATE OFFICE- 28-H,LAJPAT NAGAR-4,NEW DELHI-110024
Mob: +91 9956101502, 9838702704
E Mail ID : marketing.sunintern@gmail.com, marketing@sungripsolar.com
Proposal For: - OFFER NO-SI/2022-2023/103
Mr.Vinay Seth DATED 05/05/2022
3A/86, Azad Nagar Kanpur-208002
KIND ATTN: Mr.Seth
Cell No: 9839035228
E MAIL ID : NA
Page 1
Sun International
112/1,2nd floor,Oberoi Tower,Arya Nagar, Kanpur 208002.
9956101502 , 9838702704
Email - marketing.sunintern@gmail.com,info.sunintern@gmail.com
Table of Contents
Page 2
Sun International
112/1,2nd floor,Oberoi Tower,Arya Nagar,Kanpur 208002.
9956101502 , 9838702704
Email - marketing.sunintern@gmail.com,info.sunintern@gmail.com
Dear Sir
With reference to your query and our discussion we are pleased to submit herewith our comprehensive
proposal of the Technical & Commercial overview, for your kind perusal.
SYSTEM DISCRIPTION.
S. No. Decription Data
1 Proposed Location KANPUR
2 Co-Ordinates 26°44"N, 80°33" E
3 System Discription On Grid
4 Installation Type Roof Top Mounted
5 PV Array Capacity 10 KWp
6 Operation Mode On Grid
MAIN BILL OF MATERIALS.
S.No Item Description
1 Solar Panel EXIDE
2 Inverter GROWATT
3 Mounting Structure Panels shall be mounted on zinc plated frames GI/Aluminium
frames. The structure is designed in such a manner that it can
withstand storm & can be installed/replaced easily and in line
with site requirements. All fasteners, nut and bolts are made of
Stainless steel - SS 304 5.4.6 PCC
4 Electrical Accessories Cables will confirm to IS 694 and Interconnections, array to
junction boxes, junction boxes to PCU etc will be selected near to
PV Panel to keep voltage drop and losses to the minimum. The
bright annealed 99.97% pure copper conductors offer low
conductor resistance, Result in lower heating thereby increasing
cable life and efficiency. These wires are insulated with a special
grade PVC compound formulated and manufactured.
Temperature range: -15 deg C to +70 deg C
Sizes: Suitable Size
Color Codes: Red, Yellow, Black, Blue, Green
Page 3
SITE LOCATION.
KANPUR
Site Coordinates: NA
°C kWh/m2/d m/s
Page 4
Detailed Bill of Material.
Panels shall be mounted on zinc plated frames inclined. The structure is designed in such a manner that module can be
replaced easily and in line with site requirements and it is easy to install and service in future.
Inverter Installation
Based on the initial site visit, the inverters could possibly be installed in shed. This space provides ample accessibility and good
air circulation. The inverter is available in IP32 housing and hence it needs to be kept in well ventilated shed having protection
from direct sun-light and rains. Actual installation location and methods will be determined during full design phase.
Electrical
A detailed electrical design with single-line diagram and specifications will be prepared during full design phase after receiving
the technically & commercially clear P.O. along with requisite advance.
Page 5
Scope of Work
1 To conduct a detailed site visit with specialists to take accurate measurements, photographs, and other site-
specific information for full design
2 Prepare full system design to include , structural, electrical and mechanical components, with construction
drawings and specifications.
3 Procure equipment and materials and deliver to site
4 Perform complete system installation
5 Test all electrical components in accordance with manufacturer instructions
6 Commission the system to full operability
Client Scope
Site-specific considerations will require assistance and cooperation from the client, as outlined below
1 Provide access to work site for delivery of equipment and materials prior to and during project implementation.
2 Provide a suitable and secure space for storage of equipment and materials
3 Facilitate access of work crew to the work site 7 days a week
4 Facilitate interfacing with the client’s resident engineering staff for consultation as needed
5 All the Statutory clearances, if any, required for the Project work and goods transfer to site.
6 Any type of Civil Work such as room construction,Fondation,fencing or water point arrangements.
7 fortnightly cleaning of solar module after completing installation & commissioning.
8 Water Point should be provided near to installation site.
Price Schedule 10 KWp
SOLAR PLANT
S. No. Product Description Amount (Rs.)
10 KW ONGRID SOLAR POWER PLANT
1 Monocrystalline Modules & Grid Tie Inverter
Installation along with GI/alluminium Sructure, 398,000.00
Lighting arrestor,DC & AC Cable ,Earthings.
Gst Extra @ 13.8% AT ACTUALS
Page 6
Delivery
Dispatch will be effected in 1-2 weeks from the date of acceptance of your Purchase order. (P.O) and receipt of advance.
System installation will be completed in 1-3 weeks time from date of receipt of materials at site, provided site is ready for
installation
Validity
This offer is valid for 10 days from the date thereof.
Warranty
Manufacturing Warranty for the System: 1 Years After installation and commissioning against any manufacturing
defect. However, for the solar panels & Inverters, the performance warranty is as under
Solar Panel
Performance Warranty
A 90% efficiency upto 10 years
B 80% efficiency upto 25 years
INVERTER - 5 years on site warranty.
This confidential document is copy right and the property of SUN INTERNATIONAL.It must not be copied (in whole or part) or
to be used for manufacture or disclosed without prior consent of the company.
Page 7
Page 8
Page 9
Page 10
Page 11
Page 12
Page 13