You are on page 1of 3

G H RAISONI INSTITUTE OF ENGINEERING & TECHNOLOGY

(Approved by AICTE, New Delhi and Recognized by DTE, Maharashtra)


An Autonomous Institute Affiliated to Rashtrasant Tukadoji Maharaj Nagpur University, Nagpur
Accredited by NAAC with A+ Grade
Shraddha Park, B-37-39/1, MIDC, Hingna-Wadi Link Road, Nagpur-440016 (INDIA)
Phone Nos.: +91-07104-236102 Fax: +91-07104-236100
Email: - ghrietn@raisoni.net Web: - www.ghrietn.raisoni.net
Department of Mechanical Engineering

Teaching Plan

Subject: FLUID MECHANICS

Semester: III Branch: Mechanical Engineering Session: 2022-23


(Odd Semester)
Subject: FLUID MECHANICS
Name of Faculty: Dr. Manish Kumar Gupta
Lecture 2
Periods per Week
Practical 0
(each 60 min)
Tutorial 1

Course Objective Course Outcomes


The course objectives are: After the completion of course, student will be able to:
1. To understand the basic fluid properties like density, 1. Define various fluid properties and pressure measuring

specific gravity, viscosity, etc. instruments.

2. To understand kinematics and dynamics of fluid flow. 2. Apply the concept of hydrostatic and buoyant forces on
submerged and floating bodies.
3. To study various techniques of dimensional analysis.
3. Measure discharge using various flow measuring devices.
4. Evaluate different hydraulic losses in fluid flow system.
5. Model the complex phenomenon using dimensional analysis.

Sr. Mode of teaching CO


No. UNIT Topics Plan
(Chalk & Talk/PPT) MAPPING
Properties of Fluids
Introduction to fluid mechanics and its properties such as Density,
1
Specific gravity, Specific Weight, Specific Volume, Dynamic Chalk & talk/PPT
1
Viscosity, Kinematic Viscosity
Numerical on Properties of fluid, Dynamic Viscosity, Kinematic
Chalk & talk/PPT 1
2 Viscosity
Concept of Surface tension and Capillarity Chalk & talk/PPT 1
3
I
Concepts of fluid pressure, Pressure head, Pressure intensity
Chalk & talk/PPT 1
4 absolute, vacuum, gauge and atmospheric pressure

Introduction to Manometers and concepts of Simple manometers


5 Chalk & talk/PPT 1
and Differential Manometers
Numerical on Manometers and concept of Bourdon tube pressure
6 Chalk & talk/PPT 1
gauge
Hydrostatic Forces
Concepts of total pressure and center of pressure on plane
7 Chalk & talk/PPT 2
immersed bodies.
8 Problems on center of pressure on plane immersed bodies. Chalk & talk/PPT 2
9 II Concept of buoyancy, floatation. Chalk & talk/PPT 2
10 Concept of metacenter and metacentric height. Chalk & talk/PPT 2
11 Concept of Drag Force and its numerical. Chalk & talk/PPT 2
12 Concept of Lift Force and its numerical. Chalk & talk/PPT 2
Kinematics & Dynamics of Fluid Flow
13 Types of fluid flows, Kinematics of fluid flow Chalk & talk/PPT 3
14 Derivation of continuity equation, Euler’s and Bernoulli’s theorem. Chalk & talk/PPT 3
15 Venturimeter – Construction, principle of working Chalk & talk/PPT 3

III Coefficient of discharge, derivation for discharge through


16 Chalk & talk/PPT 3
venturimeter.
Orifice meter – Construction, principle of working derivation for
17 Chalk & talk/PPT 3
discharge through Orifice meter.
18 Pitot tube – Construction, Principle of working. Chalk & talk/PPT 3
Flow through Pipes
19 Laws of fluid friction (Laminar and turbulent) Chalk & talk/PPT 4
20 Darcy’s equation and Chezy’s equation for frictional losses. Chalk & talk/PPT 4
21 Major & Minor losses in pipes. Chalk & talk/PPT 4
IV Hydraulic gradient line and total energy line hydraulic power
22 Chalk & talk/PPT 4
transmission through pipe.
23 Pipe in series and parallel, Siphons. Chalk & talk/PPT 4
24 Transmission of power through pipes. Chalk & talk/PPT 4
Dimensional Analysis
25 Introduction to Fundamental dimensions. Chalk & talk/PPT 5
26 Dimensional Homogeneity and Rayleigh's method. Chalk & talk/PPT 5
27 Buckingham’s method. Chalk & talk/PPT 5
V
28 Dimensionless numbers and their significance. Chalk & talk/PPT 5
29 Various types of models used in dimensional analysis. Chalk & talk/PPT 5
30 Advance Topic - Introduction to Navier-Stroke’s Equation. Chalk & talk/PPT 5

Tutorial Plan
Mapped
No. Of
Week Topic With
Problems
CO
1 Numerical on Properties of fluid. 02 1
2 Numerical On fluid pressure. 02 1
3 Numerical on simple manometers. 02 2
4 Numerical on differential manometers. 02 2
5 Numerical on buoyancy for submerged bodies. 02 2
6 Numerical on metacenter and metacentric height for floating bodies. 02 3
7 Numerical on Drag and Lift Force. 02 3
8 Numerical on Venturimeter. 02 3
9 Numerical on orifice meter. 02 4
10 Numerical on flow through pipes with and without considering the minor losses. 02 4
11 Numerical on pipes in series and parallel. 02 5
12 Problems related to dimensionless numbers. 02 5

TAE Plan
Given Submission Mapped
TAE No. Topic
Date Date With CO
1 Numerical on fluid properties, buoyancy and Manometers. 26/09/2022 03/10/2022 1, 2
Presentation on topics in Kinematics and Dynamics of fluid flow and
2 28/10/2022 30/10/2022 3, 4
Flow through Pipe
1, 2, 3,
3 Multiple choice objective type class test covering various topics. 15/11/2022 15/11/2022
4, 5
Content Beyond Syllabus Topic
Given Mapped with CO’s not
Sr. No. Content Beyond Syllabus Topic
Date covered in TP
1 Boundary Layer Theory 20/12/2022 1-4
2 Introduction to the Computational Fluid Dynamics 21/12/2022 1-4

Criteria for CAE


Units as per Scheme CAE I CAE II CAE III
5 Units 1.5 Units 1.5 Units 2 Units

Syllabus for CAE (Class Assessment Examination)


CAE Units for CAE
CAE I Unit 1,2
CAE II Unit 2,3
CAE III Unit 4,5

Text Books:
1 Fluid Mechanics R.K. Bansal, 7th Edition; Laxmi Publications, 2002.
2 Fluid Mechanics and Fluid Machines D.S. Kumar, 4th Edition; S. K. Kataria & Sons, 1992

E-Books:

C.P.Kothandaraman & R. Rudramoorthy, 2nd Edition, New Age


1 Fluid Mechanics and Machinery
International, 2007.

Reference Books:

A Text book of Fluid Mechanics and


1 R. K. Rajput, 4th Edition, S.Chand Publications, 2013
Hydraulic Machines
2 Fluid Mechanics & Fluid Machinery Modi & Seth, Standard Book House, 2002
3 Fluid Mechanics F. M. White, 6th Edition, McGraw Hill Publications, 2011

Online TL Material:

1 Fluid Mechanics Prof.S.K.Som, IIT Kharagpur, NPTEL https://nptel.ac.in/courses/112105171/01.


Fundamentals of Fluid Power James D. Van De Ven University of Minnesota courser
2
https://www.coursera.org/learn/fluid-power

Dr. Manish Kumar Gupta Mr. Tejpal Parshiwanikar


Subject Teacher HOD

You might also like