Professional Documents
Culture Documents
0.075(1.90)
0.067(1.70)
0.044(1.10)
0.031(0.80)
FEATURES 0.115(2.90)
0.106(2.70)
0.008(0.20)
0.004(0.10)
0.038(0.98)
0.030(0.75)
0.017(0.45)
MECHANICAL DATA
Case: JEDEC SOD-123FL molded plastic body
Terminals: Solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end 1 2
Mounting Position: Any Cathode Anode
Weight:0.0007 ounce, 0.02 grams
Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%.
SYMBOLS K22 K23 K24 K25 K26 K27 K28 K29 K210 UNITS
Maximum repetitive peak reverse voltage VRRM 20 30 40 50 60 70 80 90 100 VOLTS
Maximum RMS voltage VRMS 14 21 28 35 42 49 56 63 70 VOLTS
Maximum DC blocking voltage VDC 20 30 40 50 60 70 80 90 100 VOLTS
Maximum average forward rectified current I(AV) 2.0 Amp
Peak forward surge current
8.3ms single half sine-wave superimposed on IFSM 40.0 Amps
rated load (JEDEC Method)
Maximum instantaneous forward voltage at 2.0A VF 0.45 0.65 0.85 Volts
Maximum DC reverse current TA=25 C 0.5
IR mA
at rated DC blocking voltage TA=100 C 10.0 5.0
Typical junction capacitance (NOTE 1) CJ 220 80 pF
Operating junction temperature range TJ -65 to +125 -65 to +150 C
Storage temperature range TSTG -65 to +150 C
Note:1.Measured at 1MHz and applied reverse voltage of 4.0V D.C.
RATINGANDCHARACTERISTICCURVES
(TA=25°C(UNLESS OTHERWISE NOTED)
20
2.0
I F, FORWARD CURRENT(A)
I F, FORWARD CURRENT(A)
10
1.6
1
Single Phase TJ=25 C
1.2 Half Wave 60Hz PULSE WIDTH=300 µs
Resistive or 1%DUTY CYCLE
inductive Load
1000
K22-K24
K25-K210
100
,REVERSE CURRENT(mA)
10 TJ=100 C 100
1 TJ=25 C
TJ=75 C
0.1 10
CJ
V R ,REVERSE VOLTAGE(V)
0.01 TJ=25 C
IR
0.001
0 20 40 60 80 100
40
32
24
16
0
1 10 100
SOD-123FL Unit:inch(mm)
0.167
(4.25)
0.106 0.031
(2.70) (0.78)
(1.22)
0.048
ORDER INFORMATION
• Packing information