Professional Documents
Culture Documents
MANUAL LOADING
i
INDEX
ii
1. LOOP FOR A NEW MANUAL LOADING TEMPLATE
The following pages will show the steps which are necessary to bring the
ManLoading template in a runtime picture. It is an example for CW (Chip Washing)
in the FiberLine. The ManLoading template is used in combination with an Analog
template (see description of the Analog Template).
1.1 Description
Start the CAE Manager and open the project.
1
Open the archive FiberLine, select the archive CW (Chip Washing) with the right
mouse button and copy the ManLoading template in the archive.
Select the new ManLoading template with the right mouse button and click
Rename.
Complete the New name and New description according the I/O-List an click OK.
2
This is the function chart of the ManLoading template in combination with the
Analog template.
Select on the function chart with the right mouse button and click Properties.
Complete the Instance name with the short name of the plant component and the
next free instance number.
e. g. CW0021; CW… for Chip Washing
3
For example CW_21 chip washing 21.
Select on the AAG_ManLoading ML1 block with the right mouse button and click
Properties.
4
Complete the Name (Loop Nr. – Loop Description), the Unit (unit) and the LNR
(Loopnumber).
2.1.1 Connector
Input:
• Show_LNR … show loopnumber;
Connectorname for Woodyard and Chip Handling: SHOW_LNR_WY
Connectorname for Fiberline, Chemicals, Evaporation: SHOW_LNR
Output:
• Out … Output Value;
Hardware analog output from the I/O-List
5
2.2 Forceblock
The force functions can be connected at 10 force signals.
2.2.1 Connector
Input:
• Language … change language;
Connectorname for Woodyard and Chip Handling: SYS010_Language_WY
Connectorname for Fiberline, Chemicals, Evaporation: SYS010_Language
• Mode01 … Force Mode (0 … 2);
0 … Interlock deactivate;
1 … Absolute (Valid in Manual and Auto mode);
2 … Limited (Valid in Auto mode);
• Force01 … Force Value 01 activate;
• VForce01 … Force Value 01;
Input:
• ILName01_1 … Force Name 01, Text for Language 1;
• ILName01_2 … Force Name 01, Text for Language 2;
6
Change from Project to Picture blocks.
7
Select the picture block SV2 (AAG_Show2Values_2).