Professional Documents
Culture Documents
TU720-30
MILLENNIUM PERMANENT PACKER REV: -
PAGE: 1 OF 3
ECO: 22945
DESCRIPTION:
The Smith Services Millennium Packer is a permanent seal bore packer. This tool is trimmed with
carbide button slips and an improved element system for reliable service. This packer is available
with optional elastomers for service temperatures up to 450oF and/or hostile environments.
APPLICATION:
The standard configuration Millennium Permanent Packer is rated for 10,000 psi pressure
differential at 350oF. This packer was designed to be used with high pressure, high volume
production, injection, disposal, or hostile wells. Its short length allows for easy wireline runs in
deviated wells.
v One-piece carbide slips minimize casing damage and hold in high strength casing grades
v Lower slips are attached to the packer using a threaded connection to prevent premature set
while runing into the hole
v Available with various bottom sub configurations for compatibility with all completion acceso-
ries
AVAILABILITY:
CASING
CASING WEIGHT CASING I.D. CASING I.D. TOOL O.D. TOOL SEAL BORE WAK ASSEMBLY
SIZE
(lbs./ft.) MIN. (in.) MAX. (in.) MAX. (in.) SIZE (in.) NUMBER
(in.)
20.00 - 23.00 4.670 4.778 4.495 45-30
5-1/2 3.000 M-555-4430-000
13.00 - 17.00 4.892 5.044 4.636 46-30
26.00 - 32.00 6.094 6.276 5.870 58-40
7
17.00 - 23.00 6.366 6.538
6.172 61-40 4.000 M-555-5640-000
33.70 - 45.30 6.435 6.725
7-5/8
24.00 - 33.70 6.625 7.025 6.380 63-40
This document is the confidential property of Smith International, Inc., “Smith” and may not be reproduced in any way, either whole or in part, or distributed without the expressed written autho-
rization of Smith. It is not rented, sold or loaned, either alone or in conjunction with equipment or products.
Use of Smith equipment contrary to manufacturer’s specifications may result in property damage, serious injury or fatality.
Technical Services
Houston, TX 281/443-3370
Marshall, TX 903/935-1552
www.smith.com
TECH UNIT
TU720-30
OPERATING PROCEDURES: REV: -
PAGE: 2 OF 3
Select the appropriate wireline adapter kit and make it
up with the pressure setting assembly as instructed in
the tech. unit for the adapter kit. Slide the setting sleeve
over the top of the setting assembly and lock it in place
above the latch by using the set screws in the top of the
sleeve.
Make-up the packer on the latch until it shoulders out,
and then back off the packer 1/4 to a 1/2 turn. Loosen the
set screws holding the setting sleeve in place and slide
the sleeve down until the threads of the sleeve engage
the threads of the adjuster nut. Screw the sleeve down
until it shoulders out on the packer. Tighten the sleeve
slightly.
Make-up the firing head with the pressure setting
assembly.
Carefully tail the packer assembly up into the derrick and
start it into the well. When the setting depth is reached
set the packer and retrieve the pressure setting assembly
and wireline adapter kit.
This document is the confidential property of Smith International, Inc., “Smith” and may not be reproduced in any way, either whole or in part, or distributed without the expressed written autho-
rization of Smith. It is not rented, sold or loaned, either alone or in conjunction with equipment or products.
Use of Smith equipment contrary to manufacturer’s specifications may result in property damage, serious injury or fatality.
Technical Services
Houston, TX 281/443-3370
Marshall, TX 903/935-1552
www.smith.com
TECH UNIT
TU720-30
REV: -
DATE: 10/26/04
PAGE: 3 OF 3
CASING WEIGHT (lbs./ft.) 20.00 - 23.00 13.00 - 17.00 26.00 - 32.00 17.00 - 23.00 33.70 - 45.30 24.00 - 33.70
DIM. (in.)
A 4.086 5.300
B 4.495 4.636 5.870 4.687 6.370
C 3.000 4.000
D 4.495 4.636 5.860 6.172 6.360
E 9.750 11.400 11.975
F 12.350 14.770 14.800
G 22.440 25.560 26.100
H 30.000 36.760
This document is the confidential property of Smith International, Inc., “Smith” and may not be reproduced in any way, either whole or in part, or distributed without the expressed written authorization of Smith. It is not rented, sold or loaned, either alone or in conjunction
with equipment or products.
Use of Smith equipment contrary to manufacturer’s specifications may result in property damage, serious injury or fatality.
Technical Services
Houston, TX 281/443-3370
Marshall, TX 903/935-1552
www.smith.com