Professional Documents
Culture Documents
LEVEL 3 Hospital
A hospital is an institution providing treatment and care for the sick, and it has long been present for most countries
around the world. According to the World Health Organization, "Health is a state of complete physical, mental and social
well-being and not merely the absence of disease or infirmity". Developing countries, lack adequate healthcare facilities,
equipment, or staff to handle the needs of its community. Hence, people in these areas are not able to receive the benefits
of modern medicine, and they usually have lower life expectancies. Apart from that, they are also used as a setting for
education of doctors, nurses and other health-care experts.
During the past years, our country's healthcare service has improved significantly, and we currently have three accredited
level three hospitals in the Region, one in Bataan, Pampanga and Tarlac. But because of the Coronavirus Disease (COVID-
19) pandemic, health emergency response was prioritized and revealed a lot of weakness in the Philippine hospital system.
Therefore, the design problem calls for a not only well-designed but also “pandemic resilient” Level 3 Hospital that will
provide healthcare to the residents of Region III.
The undertaking aims to provide a facility that will be located on any area in Region III. An adequate lot area shall be
provided by the designer to accommodate all the required spaces of a Level 3 Hospital. Because of this a space program
can be used to ease the selection of site.
D. SPACE REQUIREMENTS
(Refer to the DOH Checklist for Review Floor Plans of Level 3 Hospital)
Include other spaces that the designer thinks is necessary.
Page 1 of 4
DSGN 314_MAJOR PLATE 01_1st Semester-A.Y. 2023-2024
E. DRAWING REQUIREMENTS
Concept Sheet
Must contain the following:
a) Major Plate Title,
b) Design Concept,
c) Design Objectives,
d) Design Considerations,
e) Design Solutions, and
f) Other articulations or illustrations to express how you came up with your final design output (such as but
not limited to space programs, space matrix, etc.)
Floors Plans
Reflect the column grid and color coding of the different zones.
Provide a Key Plan with orientation as a guide for the floor plan. See Annex.
Site Section
Provide Two (2) Cross & Longitudinal Site Elevation, showing the major buildings, major roads, or areas that will
showcase your design solutions.
Indicate the callouts of materials used, levels of structures (Ground Floor Line, Second Floor Line, etc.), and natural
ground line (NGL).
Page 2 of 4
DSGN 314_MAJOR PLATE 01_1st Semester-A.Y. 2023-2024
F. PRESENTATION REQUIREMENT
*Note : Use Power Point Presentation for all drawing requirements and research documents for the presentation of the Project.
H. PROJECT TIMELINE
Page 3 of 4
DSGN 314_MAJOR PLATE 01_1st Semester-A.Y. 2023-2024
J. ANNEX
Page 4 of 4
DSGN 314_MAJOR PLATE 01_1st Semester-A.Y. 2023-2024