Professional Documents
Culture Documents
(M f g. In d u s t ri a l E p o x y P a i n t s & P ri m e r )
Off: ISHWAR KRUPA, Chittranjandas Rd, Ramnagar, Dombivli (E) – 421201 INDIA.
Factory/Works: D – 27, Phase II, MIDC, Dombivli (E) - 421204 INDIA.
Telephone:-91-251-2871378 / 2861920, (Fax) 2860452/ URL www.3spaints.com / www.3spaints.net
Email: jyo1502@gmail.com, laxmiparnaik@gmail.com & pralhad.parnaik@gmail.com
Certified ISO 9001 – 2015 HSN CODE: 32081010
Technical Data
Sr No Technical Parameters Confirmation Of Parameter
1 Color Metallic Aluminum.
2 Finish Bright Lustrous Smooth Finish
3 Consistency Liquid & uniform.
4 Volume Solids 35 – 45 %
5 Viscosity 10 - 25 seconds - Brushing Consistency
6 Density 0.98 – 1.0
7 Thinner 3‘S’ HR Paint Thinner @10 – 30% for spray
8 Dry film thickness 15 – 25 microns per coat
9 Drying time Touch dry in 2 Hours. Hard dry 12 hours
10 Interval before over coating 3 - 5 hours minimum
11 Method of Application Brush / Spray
12 Covering Capacity 12 Sq Mtrs /Ltr / Coat
13 Shelf Life 12 Months.
Caution & Safety Precautions: FLAMMABLE liquid may explode if heated OR burnt. Do not swallow the product, if
comes in contact with eyes, immediately contact physician/doctor. Use mask and other safety gear/gadgets
during application of the product in well ventilated area. Keep away from children.
Disclaimer: The information in this document is given to the best of our knowledge, based on laboratory testing and practical experience. Minor
product variations may be implemented in order to comply with technical requirements TDS may change with time necessitated. No guarantee implies
for any of the above recommendations, where in conditions of surface preparation, storage and condition of use along with cle anliness and safety is
beyond our control.
Revised COPY dated 01/04/2018