Professional Documents
Culture Documents
Description
The measured pressure acts through the diaphragm on the
quartz crystal measuring element, which transforms the pres-
sure p (bar) into an electrostatic charge Q (pC = pico Cou-
lomb). Technical Data
The stainless steel diaphragm is welded flush and hermetically Range bar 0 ... 250
to the stainless steel sensor body. The quartz elements are Calibrated partial ranges bar 0 ... 25
mounted in a highly sensitive arrangement (transversal effect), bar 0 ... 2,5
which is welded hermetically to the body. Overload bar 500
Sensitivity pC/bar ≈–16
The connector is welded to the body, but its fluoropolymer Natural frequency kHz ≈150
insulator is not absolutely tight. Linearity %FSO ≤±0,5
Acceleration sensitivity bar/g <0,001
Application Operation temperature range °C –196 ... 200
The miniature quartz pressure sensors Type 601A are especially Temperature coefficient %/K <10–4
suited for dynamic pressure measurements on objects offering of sensitivity
little mounting space. Insulation resistance at 20 °C Ω ≥1013
Shock resistance g 10 000
If mounting space and max. measured frequency allows for, Capacity pF 5
the sensor Type 701A should be selected because of its five Weight g 1,7
times higher sensitivity. Connector, fluoropolymer insulator M4x0,35
Page 1/2
This information corresponds to the current state of knowledge. Kistler reserves ©1995 ... 2015, Kistler Group, Eulachstrasse 22, 8408 Winterthur, Switzerland
the right to make technical changes. Liability for consequential damage resulting Tel. +41 52 224 11 11, Fax +41 52 224 14 14, info@kistler.com, www.kistler.com
from the use of Kistler products is excluded. Kistler is a registered trademark of Kistler Holding AG.
Piezoelectric Pressure Sensor – Miniature – Pressure Range 250 bar, Type 601A
Ordering Code
• Piezoelectric Pressure Sensor Type 601A
Miniature – Pressure Range 250 bar