Professional Documents
Culture Documents
2. Touch these keys in this order: [Imaging Process Adjustment] -> [Thick Paper Density Adjustment].
NOTE
▪ Select [Thick Type1] or [Thick Type2] for bizhub 458e only.
Thick Type1 Thick2, Thick3, Thick4, Glossy Paper, OHP Film
Thick Type2 Thick1, Thick1+
1. Touch the Lighter or Darker key for the desired color to correct the image density.
• Light color: Touch the Darker key.
• Dark color: Touch the Lighter key.
2. Touch [END] to validate the setting value.
(2) Procedure
1. Call the Service Mode to the screen.
2. Touch [Imaging Process Adjustment] -> [Manual Toner Add].
3. Touch [Black].
4. Pressing the Start key will let the machine detect the current toner density and; if the density is lower than a reference value, a toner
replenishing sequence is run. Then a developer agitation sequence is run.
5. Operation above is repeated maximum of ten sets of times with one set consisting of three sequences until it reaches to the reference
value. When it is higher than the reference value, only the agitation is conducted.
(2) Procedure
1. Call the Service Mode to the screen.
2. Touch [Imaging Process Adjustment] -> [Manual Toner Add] -> [Hopper Toner Filling].
3. Press the Start key to start filling and agitating operations.
H-32