Professional Documents
Culture Documents
Ed1159 - Release of Firmware Ver.3.0-X-064 - 064918
Ed1159 - Release of Firmware Ver.3.0-X-064 - 064918
No. ED1159
February, 2017
Equipment: LP5000R/LP5000
Improvement & Part No. Errata Technical Product Info. & Modification Field Equip.
Countermeasures & Additions Information Specifications Control Countermeasure
UN1 [ √ ] UN2 [ ] UN3 [ ] UN4 [ √ ] No. No.
<Contents>
A new version of firmware has been released for LP5000R and LP5000, correcting two faults on
maintenance screens that were found with Windows 7 being used.
<Released Firmware>
2. Steps
(1) Download the file “LP5000R_Firmware.zip” from GTS and decompress it.
(2) Copy two files “EpxGmc27.cbf” and “EpxLdd27.cbf” to the following folder in IC III.
D:\Fujifilm\FrontierSDK\Printer\PrnDev\Prog\Kariba
(3) After copying, restart IC III and LP5000R / LP5000. The version of the firmware is automatically
upgraded to Ver.3.0-0X-064.
*Please note that if this new version of firmware, 3.0-0X-64, is already factory-installed, the
automatic version update is not performed at the time of installation or if the steps above are
followed.
1
<Corrections to Faults>
The new version corrects two faults that were identified in version 3.0-0X-060* on LP500R / LP5000.
(*The firmware Ver.3.0-0X-060 is installed in MSP49 Ver. 4.2.1.3063 for MS Ver. 4.2.
No. Correction Screen
1 Corrected a fault that setting changes are not
reflected on “Image Position/Angle Fine
Adjustment [0527]”.
FUJIFILM Corporation
7-3, Akasaka 9-chome, Minato-ku, Tokyo 107-0052, Japan
MTI_ED1159