Professional Documents
Culture Documents
I. OVERVIEW
A guide to successfully install ImagePilot software on a HP Z400 Server.
Konica Minolta Medical Imaging, Inc.
II. RESPONSIBILITY
This installation and integration is to be done by a field engineer who has been
trained in ImagePilot.
III. SYNOPSIS
This guide is for installing ImagePilot Touch on a HP Z400 model PC. These in-
structions assume your PC has been preloaded with Ghost image.
HP Z400-500GB HP Z400-2TB
IV. REQUIREMENTS
1. This document.
2. DVD 9604-SOFV150R01
V. PROCEDURE
1. Rename computer to proper name, (IP-S-
0XXXX) the XXXX is the software serial
number. This can not be changed once soft-
ware is installed.
4. Select [Change…]. Type the new PC name into “Computer name:”. Then press [OK].
3. Check on [Compress this drive to save disk space] on the “General” tab.
4. Check off the checkbox for “Compress contents to save disk space” and click [OK].
Also, if clients are to be installed, register them in the Server Service Tools before in-
stalling the client software.