Professional Documents
Culture Documents
TITLE:
Counter measure for the problems of Video Print, Ping test, DICOM Storage and Steered Beam.
MODEL AFFECTED:
SSD-4000
PURPOSE:
It is to inform the problems of Video Print, Ping test, DICOM Storage and Steered Beam and the
solution for these problems.
SYMPTOM:
(1) Software Version is Ver.7.0.0 ~ 7.2.0
It cannot make a printout when you press PRINT at the first time after starting up the machine.
If you froze the machine right after starting up and left it for a while, this phenomenon would occur.
When you press PRINT button again, it will print an image normally.
ATTACHED DOCUMENTS:
Product Update Report, 1 sheet
ESSENTIAL CONDITION:
None
SOLUTION:
This solution is closely related to the Technical Bulletin No.SSD-4000-31 and -33, therefore please
refer these documents and the following table before installing the update kit.
Required kit and version indication after upgrade
Version PM-4000-62 PM-3500-29 PM-4000-63
System:00-*.*.*.3 System:00-*.*.*.4 System:00-*.*.*.5
6.0.1 applicable applicable
7.0.0/7.2.0 applicable applicable
7.2.1 applicable
Technical Bulletin No.SSD-4000-31 No.SSD-4000-32 No.SSD-4000-33
Measure to DICOM issues This Technical Bulletin Display problem of UST-677P
CAUTION
When you install multiple kits, it is necessary to follow the order below.
1. PM-4000-62 → 2. PM-4000-63
In the case of Software Version “6.0.1”. After upgrade when multiple kits are used, version
indication is “00-*.*.*.3/5”.
1. PM-3500-29 → 2. PM-4000-63
In the case of Software Version “7.0.0/7.2.0”. After upgrade when multiple kits are used,
version indication is “00-*.*.*.4/5”.
(1) Create the update floppy disks (2nd ~ 8th) by copying the files from CD-3500-20-1-1.
The file “SSD-4000.002” is for the floppy disk: FD-3500-20-1-2 (2nd disk), then create the
FD-3500-20-1-3, 4, 5, 6, 7 and 8 respectively in the same manner. (Refer the figure below)
Approved by
General Manager
Medical Ultrasound Engineering Dept.
Written by
Product Update Report
Copy this sheet to fill in.
From
This reports the work has completed according to ALOKA Technical Bulletin SSD-4000-32.
Title: Counter measure for the problems of Video Print, Ping test, DICOM Storage
and Steered Beam
Report:
Customer
Date - - Name
(yyyy-mm-dd)
Person in
charge
Remarks
配布先 発行元
受領 配布確認
配布連絡書
返却
ロジスティックス課 MS サービス課
件名: Counter measure for the problems of Video Print, 発行番号: SSD-4000-32
Ping test, DICOM Storage and Steered Beam
発行日: 2006 年 11 月 14 日
適用(;を記入):
一般輸出向け
アメリカ向け
一般輸出およびアメリカ向け
受領後、配布先受領欄に「データ印押印」または「署名および受領日記入」の上、この配布連絡書
を発行元に返却下さい。