Professional Documents
Culture Documents
TITLE:
Measure to DICOM issues
MODEL AFFECTED:
SSD-4000 with the software version 1.0.1 through 6.0.1.
PURPOSE:
It is to inform several DICOM issues and the solution for them.
SYMPTOM:
(1) Invalid image Date/Time values unexpectedly set to DICOM tags
By the following operation, image date/time in DICOM tag is wrongly set upon storage.
Step1: Store multiple images to internal hard disk (ex. 100 images).
Step2: Delete images partly (ex. images #30 through #70).
Step3: Store/Transfer images positioned after the deletion made above (ex. #72).
The date/time appears at top right corner of pixel image remains correct. However, the values
in DICOM tag are different, and this may confuse the list function on server/viewer software.
(2) Invalid values unexpectedly set to DICOM tags when JPEG Baseline is selected
When the JPEG Baseline is selected as the transfer syntax upon negotiation, the invalid values
are unexpectedly set to four DICOM tags (Samples Per Pixel, Photometric Interpretation,
Planer Configuration, Bits Allocated).
This may cause the image storage error or retrieve error if the server/viewer checks the
consistency of information.
(3) “Network Communication Error” happens on specific condition
The network communication is failed upon the following conditions for transfer syntaxes,
Case A: non-compressive for Single frame, compressive for Multi-frame
Case B: compressive for Single frame, non-compressive for Multi-frame
(4) System locks-up at multiple printing on B/W printer.
When the preset is configured to make multiple printing on B/W printer, it causes the system
error sometimes.
ESSENTIAL CONDITION:
None
SOLUTION:
Update the software by PM-4000-62 regardless of the current software version.
b) Insert the floppy disk (FD-4000-43-1-1) to the disk drive and press SET button to
start loading.
c) Follow the instruction message displayed, set totally seven floppy disks.
Approved by
Written by
Product Update Report
Copy this sheet to fill in.
From
This reports the work has completed according to ALOKA Technical Bulletin SSD-4000-31.
Report:
Customer
Date - - Name
(yyyy-mm-dd)
Person in
charge
Remarks
配布先 発行元
受領 配布確認
配布連絡書
返却
ロジスティックス課 MS サービス課
適用(;を記入):
一般輸出向け
アメリカ向け
一般輸出およびアメリカ向け
受領後、配布先受領欄に「データ印押印」または「署名および受領日記入」の上、この配布連絡書
を発行元に返却下さい。