Professional Documents
Culture Documents
TITLE:
IPC-1531 problem of chroma, image size, image position
MODEL AFFECTED:
IPC-1531
SSD-3500 and SSD-ALPHA5 are not affected since those have other type of TV monitor
IPC-1530(U) for SSD-3500 and IPC-1530(U-1) for SSD-ALPHA5.
PURPOSE:
Inform that both temporary solution (resetting) and permanent solution (exchanging the IC).
SYMPTOM:
¾ When turn on the power, the monitor get
1) wrong chroma
2) incorrect size of display area
3) wrong position of display
CAUSE:
IPC-1531 has an MPU. Due to the quality of MPU: IC301, “Auto input signal detect” function
which is not used for ALOKA system works and change the setup data (chroma, display position,
display size, ..etc.) during the boot up.
[Technical term]
IC301 : The MTV212M32 micro-controller is an 8051 CPU core embedded device
specially customized for monitor application. As ALOKA factory preset data keeps in the
other IC. You will not loose it when you exchange IC301.
The IC has three functions, MPU, ROM, and RAM.
Factory preset data : It is the data of chroma, display position, display size, and including
OSD setting adjusted for ALOKA. It is saved in the different IC than IC301.
Factory preset recall : Restores "ALOKA factory preset data" and copied into an RAM
table in IC301.
RAM table in IC301 : It is a table contains the data for MPU to set an initial condition
during boot-up. ALOKA Factory setting data is copied into this table by the master data on
the other IC. However, the wrong data could be saved if “Auto input signal detect”
unexpectedly worked.
SOLUTION:
1: (Temporary solution/ Cause confirmation: Factory preset data recall)
If you don’t have PM-IPC-1531-1, or judge the cause of trouble which from IC301-monitor side
or main unit SSD side. Remove the monitor rear cover, do the “Factory preset data recall” follow
the attached sheet. (TB_INF-102_Proceduer of the Reset).
During modification,
Please pay attention to Electro Static Discharge.
Note.
This monitor has a MPU, after apply power,
MPU start up then cooling fan start running,
there is a time lag.
ATTACHED DOCUMENTS:
1) Factory preset data recall (Attachment of INF-102)
2) INF-102_IC301Replacement proceduer_MS4-2469(20pages)
3) INF-102_IC301Replacement proceduer_MS4-2470(28pages)
4) Product Update Report, 1 sheet
Written by
AlokaTechnical Service
Product Update Report
Copy this sheet to fill in.
This reports that the work has completed according to ALOKA Technical Bulletin INF-102.
Country City
Serial Number
Model Name SSD- of SSD M0
Serial Number
Model Name IPC-1531 of IPC M0
Company
Remarks
IC-301 exchanged to V1.1A by PM-IPC-1531-1
Signature of technician