Professional Documents
Culture Documents
HES
B 100-99A
C REV2
DIMENSIONAL TOLERANCES FOR THREADED
FASTENERS
1. SCOPE
This standard specifies the dimensional tolerances for the following portions of threaded fasteners
specified in the part standard.
Clause
1) Width Across Flats of Bolt Heads and Nuts 2.1
2) Thickness of Bolt Heads and Nuts 2.2
3) Length and Nominal Diameter of Bolts 2.3
4) Head Size and Length of Machine Screws 2.4
5) Thickness and Slots Dimensions of Slotted Nuts 2.5
6) Thickness of Ball Head Lock Nuts and Hole Depth before Threading 2.6
7) Eccentricity of Bolt Heads and Threads of Nuts 2.7
8) Inclination of Bearing Surfaces and Flats of Bolts and Nuts 2.9
9) Machine Screws - Eccentricity of Cross Recesses of Heads
and Inclination of Bearing Surfaces 2.9
2. DIMENSIONAL TOLERANCES
Remarks: All dimensions are in millimeters unless otherwise specified.
2.1 Width Across Flats of Bolt Heads and Nuts
B Tolerance
B 0
5.5 ~ 10
-0.2
0
11 ~ 17
-0.25
0
19 ~ 30
-0.35
0
32 ~ 50
-0.4
H, H1, H2 Tolerance
1.8 ~ 3 0.1
3.2 ~ 6 0.15
6.5 ~ 19 0.2
L Tolerance of L d1 Tolerance of d1
0
50 and under 0.5 3~6
-0.1
0
over 50 to 120 0.7 7 ~ 10
-0.15
0
over 120 to 250 0.9 12 ~ 30
-0.2
D
H4 Tolerance H5 Tolerance H5+e Tolerance
2 1.75 2.45
0 0
2.6 0.15 2.3 3.2
-0.3 -0.5
3.3 2.8 4.0
3.9 3.4 0 4.8 0
0.2
5.2 4.4 -0.4 6.2 -0.6
Tolerance
L
D Tolerance *d = 3, 4 *d = 5, 6, 8
0 0
5.5, 6, 7, 8, 10 and under
-0.5 0 -0.8
0 -0.6
9, 10 over 10 to 20
-0.6
0 0 0
10.5, 12 over 20 to 40
-0.7 -0.8 -1
0 0
14, 16 over 40
-0.8 -1
Note: *d = Nominal designation of screw threads
H Common nut
HL Thin nut
6.2 ~ 12 0.25
13 ~ 19.5 0.3
S1 S1 Tolerance
Over 10 0.15
F F
E
E