Professional Documents
Culture Documents
Quiz 2 Questions With Answers
Quiz 2 Questions With Answers
Quiz 2 Questions With Answers
A practice of the mechanical engineering profession that involves the design and operation of an
energy-consuming device that controls the temperature, humidity, distribution, and cleanliness of
ambient air is called ___
Airconditioning engineering
2. The basic component of the vapor compression refrigeration system that reduces the temperature of
the refrigerant at constant pressure is called ___
Condenser
3. The basic component of the vapor compression refrigeration system that increases the temperature
of the refrigerant at constant pressure is called ___
Evaporator
4. In an ideal vapor compression refrigeration system, evaporators are mounted right after the ___
Metering devices
5. The basic component of the vapor compression refrigeration system that increases the pressure and
temperature of the refrigerant is called ___
Compressor
6. A practice of mechanical engineering profession that involves the design and operation on an energy-
consuming device that reduces the temperature of the surrounding space is called ___
Power engineering
7. In an ideal vapor compression refrigeration system, liquid separator is mounted after the ___
compressor
8. A thermodynamic process that changes the solid phase to the liquid phase of water is called ___
Melting
9. A thermodynamic process that changes the liquid phase to the gaseous phase of water is called ___
evaporation
10. The ___ is an important part of any vapor compression refrigeration system because it ensures liquid
refrigerant is entering the expansion device
Liquid receiver
11. A capillary tube is used as an expansion device for a vapor compression refrigeration system in order
to ___ the pressure of the refrigerant
Reduce
12. The ___ is a system that uses a heat source, which may be solar power or a fossil-fueled flame, to
provide the energy needed to run the cooling process
Absorption refrigeration
13. A thermodynamic process that changes the gaseous phase to the solid phase of water is called ___
deposition
14. In an ideal vapor compression refrigeration system, expansion devices are mounted right after the _
Filter dryer
15. A _ is a storage tank for holding liquid refrigerant and is located after the condenser in a vapor
compression refrigeration system
Liquid receiver
16. In an ideal vapor compression refrigeration system, vapor compressor is mounted after the ___
Liquid separator
17. In an ideal vapor compression refrigeration system, the equipment used to remove solid particles in
the refrigerant is called ___
Filter dryer
18. In an ideal vapor compression refrigeration system, compressor is mounted after the ___
Evaporator
19. The ___ is a thermodynamic process and the phase transition of a substance in which the gas
transforms into solid without passing through the liquid phase
Deposition
20. The basic component of the vapor compression refrigeration system that rejects heat absorbed by
the refrigerant is called ___
Condenser
21. Which of the following system is used for refrigeration and airconditioning design
22. The basic component of the vapor compression refrigeration system that decreases the pressure and
temperature of the refrigerant is called ___
Expansion device
23. In an ideal vapor compression refrigeration system, filter dryer is mounted after the ___
Liquid receiver
24. The basic component of the vapor compression refrigeration system that absorbs the surrounding
heat of the refrigerant is called ___
Evaporator
25. A thermodynamic process that changes the solid phase to the gaseous phase of water is called ___
Sublimation
26. In an ideal vapor compression refrigeration system, liquid receiver is mounted after the ___
Condenser
27. In an ideal vapor compression refrigeration system, capillary tube is a type of ___
Metering device
28. In an ideal vapor compression refrigeration system, the equipment used to dry the moisture in the
refrigerant is called ___
Filter dryer
29. A thermodynamic process that changes the liquid phase to the solid phase of water is called ___
Freezing
30. The ___ is the process of achieving and maintaining a temperature below ambient, with the aim of
cooling a product or space, to the required temperature
Refrigeration