Professional Documents
Culture Documents
EXAMINATION
I/AV B.Tech. DEGREE
Naval Architecture and Marine Engineering
First Semester
INDUSTRIAL ELECTRONICS
(Effective from the admitted batch of 2019-2020)
(P.TO)
[ 28 BENG 3112]
**
2
28 BENG 3113]
IIIAV B.Tech. DEGREE EXAMINATION
Naval Architecture And Marine
Engineering
First Semester
FLUID MECHANICs
(Effective from the admitted batch of 2019-2020)
equation in Cartesian
Coordinates in 2 - D.
(P.T.O)
[28 BENG 31131
2 (a) The specitic weight of seawater may be taken to
Vary according to the expression
Figure.1
6. (a) In case a Laminar Boundary layer over a flat
plate, compare its growth for the following cases
) Flatpate kept in a stream ofair flowing at 2.5 ms
) Flatplate kept in awater stream flowing at 2.5m/s
(11) Flatplate kept in an air stream flowing at 10.0m/s
Specific weights for water and air are
9810 N/m' and 12.1 Nm' respectively.Viscosities
of water and air are 108 X 10 N.s/m and
185X10° N.s/m* respectively.
(b) Amodel of a harbour has a length scale of 1:225.
Storm waves of 20 m amplitude and velocity of
10 m/s strike against the break water of the
prototype harbour. Determine for the model ) .
The size and velocity of the waves and i). If the
time between the tides in the prototype is 12 hours
what should be the tidal period in the model
(P.T.O)
Sod3
28 BENG -3113]
is E =pbo,U
0.2
have the form7 The free stream velocity U
(4=9.81 X10Ns/m
28 BENG 3115]
/ V B.Tech. DEGREE EXAMINATION
Naval Architecture And Marine
Engineering
First Semester
SHIP CONSTRUCTION
(Effective from the admitted batch of 2019-2020)
Time :3 Hours
Max. Marks: 70
Question No. 1 is compulsory
Answer any FOUR
All
questions from the remaining.
questions carry equal marks.
1. Answer the
following briely:
(a) Lloyds certificates
(P.T.O)
28 BENG -3115 ]]
3. Draw the Layout of a Modern Shipyard and identify
various departments including dry dock,
building dock,
Ship Repair Division.
4. (a) Explain in detail the different
Ship types.
(b) Briefly explain the
units in
assembly
and eraetion of hull
a
building dock.
B. (a) Explain Mechanical and
Thermal Cutting Process.
(b) Explain various
Welding methods used in Ship
Constructions.
. (a) What the
are
Machinery and Electrical groups?
Explain.
(b) What is
outfitting? Write advantages of
outtitting advanced
7. (a) Discuss Imprecation and
'Testing Carried out at
various stages of Ship
Construction.
(b) Draw the Stern Structure of a
Single Screw Ship.
8. Write short notes on:
(P.T.O.)
[ 28BENG 3114
2. (a) Explain the procedure that you know for
determination of principle dimensions of a ship.
(b) Draw a neat sketch of the mid-ship section of a
bulk carrier.
3
28 BENG -3116]
I/AV B.Tech. DEGREE
EXAMINATION
Naval Architecture And Marine
First Semester
Engineering
RESISTANCE AND PROPULSION
(Effective from the admitted batch of
2019-2020)
Time :3 Hours
Max. Marks: 70
Question No. 1 is compulsory
Answer any FOUR
All
questions from the remaining.
questions carry equal marks.
1.
Explain the following briefly:
(a) A ship of
length 150 m has
25 knots. Calculate
a
design speed of
the corresponding speed ofa
model of length 5 m.
b) Define cavitation
number
(c Define the terms K, and K
(d) Define slip ratio.
ship is
(b) Explain in detail how the resistance of a
thrust of
8. (a) A ship has a propeller which produces a
**