Professional Documents
Culture Documents
White.&
Nothing Grey!
Born To Rule
PEB Industry!
Index
ARE YOU EXPLORING
01 POSSIBILITIES WITH
PRE ENGINEERED BUILDINGS?
01-16
Are you
Expl o r i n g
possibilities
with Pre
Engineered
Buildings?
What is a Pre
Engineered Building?
Element Components
SCAN TO
KNOW MORE
Land
The location must be strategic,
you must check the level of the
land in reference to nearest road
level, Soil & Strata, Ground water
level and road network available.
Layout
The layout must be professionally planned,
considering factors such as vehicle
movement, parking area, utility space and
drainage system must be mapped out.
Civil Foundation
Drainage work must be done prior
to the civil foundation work. Don’t
Buildings?
Industrial
Storage Solutions
Warehouse
Multi Span
Members
Secondary Framing Members are the structural members which carry
loads to the primary framing members. Secondary structural framing
refers to C sections and Z sections, Grits, Eave struts, Wind bracing,
Flange bracing, Base angles, Clips and other miscellaneous structural
parts.
Standing Seam
Systems
Screw Down Sheeting Method:
Roof and wall cladding are formed by cold rolling metal sheet ranging
Screw down
between 0.5 to 0.7mm thick in bending press machine. They are used to
provide shelter and support from wind pressure and live load.
Crane Systems
Crane systems are required in manufacturing buildings that require
running crane, underhung crane, Monorail Crane and jib Crane. The most
commonly adopted is the top running crane system.
Canopies
Canopies are narrow roof systems that provide various functions such as
a shade to block direct sunlight on the building walls, an extended cover
to protect the buildings against the rain, and a cover at entrances of the
buildings or adjacent to the walls for car parking.
???
Bay Spacing
Selects a vendor who provides the cheapest Selects a vendor who understands PEB as a
price. solution, and provides the best quality
without being too expensive.
Only shares the dimensions of the Building
while sharing the requirements. Understands land selection, overall layout,
and ground water drainage & then asks for
Demands low weight structure without being an estimate.
concerned about the stability of the
structure. Demands an optimum structure with seismic
load & wind pressure calculations.
Directly convert steel prices to arrive at the
estimate.
make of steel.
Not too much bothered about the GA
Drawings. Involving himself in understanding the GA
Drawings with the Engineer.
Demands fast erection and doesn't care
about Best Erection Practices. Demands fast erection with Best Erection
Practices.
Ignorant towards handing over facilities.
Ensures to complete formalities & issues
Does not maintain a relationship with the
vendor.
Facilitates strategic relationship with the
vendor.
SCAN TO
KNOW MORE
Do you
about Pre
Engineered
Buildings?
What will ensure that
PEB roofs do not leak?
Leaking roof is the most common problem faced in metal buildings. You must understand the root cause of this
annoying problem. We have learned about these problems through our years of experience in the PEB industry.
-
bonate sheets & turbo ventilators should be
matching with the original roof sheet properly.
SCAN TO
KNOW MORE
SCAN TO
KNOW MORE
MISTAKE METER
roof & wall systems with galvalume steel coat to provide thermal
insulation & minimise heat transfer.
Type of Building
Warehouse
Light manufacturing
Heavy manufacturing
3 to 5
5 to 10
10 to 20
C
SCAN TO
KNOW MORE
SCAN TO
KNOW MORE
oous
ustotomme
CC Bigger stockyard reduce
Material Handling Cutting
Cutting must be done Shearing
Shearing must be
o
the turnaround cycle of with the cold process
Interdependence of any facilitated for proper
YY
each batch of that ensures the
process on the
molecular stability of the
aatt
production. availability of material
steel.
i
r C e
v v
m e
r r
“Coust o
ee
e”
SS
er v i c
r r
o u r S
u u
a t Y
o
Y o
27
ircicTe
Teaamm
vic e
ce
Page - 28 | Would you like to know more about us?
The Brand Story
Philosophy
Personality
Promise
Purpose
Rage
- Sa njay Singh
Drilling
Welding
Bending Painting
Cutting:
Welding:
•
Painting:
•
•
•
•
DESCRIPTION DETAILS
5.
6.
7.
8.
9.
ADDITIONS/
ACCESSORIES
ACCESSORIES
NOTES
Contact Us:
PEB360 Solutions (India) LLP SCAN ME
H.O: PEB 360 Solutions, M-1, Saraf Court, Dhantoli, Nagpur- 440012
Follow us on: