Professional Documents
Culture Documents
ISSUE 2
Page 1 of 1
Environment Temp. 0C 23
Sample Condition SATISFACTORY
of Test RH % 54
Sample Description: -
Standard requirements
Standard ASTM F1554
Grade 105
Yield Strength, minimum (MPa) 724
Tensile strength, minimum (MPa) 862-1034
Elongation, minimum (%) 15.0
Technical Manager
The lab is responsible for all data except if provided by the client
Results relate only to the sample as received from the Customer
MTL is not responsible for samples after 15 days of the test date
The test report shall NOT be reproduced without approval from the MTL management
The laboratory follows simple acceptance with a zero guard band as per ILAC G8.
-----x-------x end of test report x-------x-----
TM-03-02
ISSUE 2
Page 1 of 1
Environment Temp. 0C 23
Sample Condition SATISFACTORY
of Test RH % 54
Sample Description: -
Standard requirements
Standard ASTM F1554
Grade 105
Yield Strength, minimum (MPa) 724
Tensile strength, minimum (MPa) 862-1034
Elongation, minimum (%) 15.0
Technical Manager
The lab is responsible for all data except if provided by the client
Results relate only to the sample as received from the Customer
MTL is not responsible for samples after 15 days of the test date
The test report shall NOT be reproduced without approval from the MTL management
The laboratory follows simple acceptance with a zero guard band as per ILAC G8.
-----x-------x end of test report x-------x-----
TM-03-02
ISSUE 2
Page 1 of 1
Environment Temp. 0C 23
Sample Condition SATISFACTORY
of Test RH % 54
Sample Description: -
Standard requirements
Standard ASTM F1554
Grade 105
Yield Strength, minimum (MPa) 724
Tensile strength, minimum (MPa) 862-1034
Elongation, minimum (%) 15.0
Technical Manager
The lab is responsible for all data except if provided by the client
Results relate only to the sample as received from the Customer
MTL is not responsible for samples after 15 days of the test date
The test report shall NOT be reproduced without approval from the MTL management
The laboratory follows simple acceptance with a zero guard band as per ILAC G8.
-----x-------x end of test report x-------x-----
TM-03-02
ISSUE 2
Page 1 of 1
Environment Temp. 0C 23
Sample Condition SATISFACTORY
of Test RH % 54
Sample Description: -
Standard requirements
Standard ASTM F1554
Grade 55
Yield Strength, minimum (MPa) 380
Tensile strength, minimum (MPa) 517-655
Elongation, minimum (%) 21
Technical Manager
The lab is responsible for all data except if provided by the client
Results relate only to the sample as received from the Customer
MTL is not responsible for samples after 15 days of the test date
The test report shall NOT be reproduced without approval from the MTL management
The laboratory follows simple acceptance with a zero guard band as per ILAC G8.
-----x-------x end of test report x-------x-----
TM-03-02
ISSUE 2
Page 1 of 1
Environment Temp. 0C 23
Sample Condition SATISFACTORY
of Test RH % 54
Sample Description: -
Standard requirements
Standard ASTM F1554
Grade 55
Yield Strength, minimum (MPa) 380
Tensile strength, minimum (MPa) 517-655
Elongation, minimum (%) 21
Remarks
Technical Manager
The lab is responsible for all data except if provided by the client
Results relate only to the sample as received from the Customer
MTL is not responsible for samples after 15 days of the test date
The test report shall NOT be reproduced without approval from the MTL management
The laboratory follows simple acceptance with a zero guard band as per ILAC G8.
-----x-------x end of test report x-------x-----
TM-03-02
ISSUE 2
Page 1 of 1
Environment Temp. 0C 23
Sample Condition SATISFACTORY
of Test RH % 54
Sample Description: -
Standard requirements
Standard ASTM F1554
Grade 55
Yield Strength, minimum (MPa) 380
Tensile strength, minimum (MPa) 517-655
Elongation, minimum (%) 21
Remarks
Technical Manager
The lab is responsible for all data except if provided by the client
Results relate only to the sample as received from the Customer
MTL is not responsible for samples after 15 days of the test date
The test report shall NOT be reproduced without approval from the MTL management
The laboratory follows simple acceptance with a zero guard band as per ILAC G8.
-----x-------x end of test report x-------x-----
TM-03-02
ISSUE 2
Page 1 of 1
Environment Temp. 0C 23
Sample Condition SATISFACTORY
of Test RH % 54
Sample Description: -
Standard requirements
Standard ASTM F1554
Grade 105
Yield Strength, minimum (MPa) 724
Tensile strength, minimum (MPa) 862-1034
Elongation, minimum (%) 15.0
Technical Manager
The lab is responsible for all data except if provided by the client
Results relate only to the sample as received from the Customer
MTL is not responsible for samples after 15 days of the test date
The test report shall NOT be reproduced without approval from the MTL management
The laboratory follows simple acceptance with a zero guard band as per ILAC G8.
-----x-------x end of test report x-------x-----
TM-03-02
ISSUE 2
Page 1 of 1
Environment Temp. 0C 23
Sample Condition SATISFACTORY
of Test RH % 54
Sample Description: -
Standard requirements
Standard ASTM F1554
Grade 105
Yield Strength, minimum (MPa) 724
Tensile strength, minimum (MPa) 862-1034
Elongation, minimum (%) 15.0
Technical Manager
The lab is responsible for all data except if provided by the client
Results relate only to the sample as received from the Customer
MTL is not responsible for samples after 15 days of the test date
The test report shall NOT be reproduced without approval from the MTL management
The laboratory follows simple acceptance with a zero guard band as per ILAC G8.
-----x-------x end of test report x-------x-----
TM-03-02
ISSUE 2
Page 1 of 1
Environment Temp. 0C 23
Sample Condition SATISFACTORY
of Test RH % 54
Sample Description: -
Standard requirements
Standard ASTM F1554
Grade 105
Yield Strength, minimum (MPa) 724
Tensile strength, minimum (MPa) 862-1034
Elongation, minimum (%) 15.0
Technical Manager
The lab is responsible for all data except if provided by the client
Results relate only to the sample as received from the Customer
MTL is not responsible for samples after 15 days of the test date
The test report shall NOT be reproduced without approval from the MTL management
The laboratory follows simple acceptance with a zero guard band as per ILAC G8.
-----x-------x end of test report x-------x-----
TM-03-02
ISSUE 2
Page 1 of 1
Environment Temp. 0C 23
Sample Condition SATISFACTORY
of Test RH % 54
Sample Description: -
Standard requirements
Standard ASTM F1554
Grade 55
Yield Strength, minimum (MPa) 380
Tensile strength, minimum (MPa) 517-655
Elongation, minimum (%) 21
Technical Manager
The lab is responsible for all data except if provided by the client
Results relate only to the sample as received from the Customer
MTL is not responsible for samples after 15 days of the test date
The test report shall NOT be reproduced without approval from the MTL management
The laboratory follows simple acceptance with a zero guard band as per ILAC G8.
-----x-------x end of test report x-------x-----
TM-03-02
ISSUE 2
Page 1 of 1
Environment Temp. 0C 23
Sample Condition SATISFACTORY
of Test RH % 54
Sample Description: -
Standard requirements
Standard ASTM F1554
Grade 55
Yield Strength, minimum (MPa) 380
Tensile strength, minimum (MPa) 517-655
Elongation, minimum (%) 21
Technical Manager
The lab is responsible for all data except if provided by the client
Results relate only to the sample as received from the Customer
MTL is not responsible for samples after 15 days of the test date
The test report shall NOT be reproduced without approval from the MTL management
The laboratory follows simple acceptance with a zero guard band as per ILAC G8.
-----x-------x end of test report x-------x-----
TM-03-02
ISSUE 2
Page 1 of 1
Environment Temp. 0C 23
Sample Condition SATISFACTORY
of Test RH % 54
Sample Description: -
Standard requirements
Standard ASTM F1554
Grade 55
Yield Strength, minimum (MPa) 380
Tensile strength, minimum (MPa) 517-655
Elongation, minimum (%) 21
Technical Manager
The lab is responsible for all data except if provided by the client
Results relate only to the sample as received from the Customer
MTL is not responsible for samples after 15 days of the test date
The test report shall NOT be reproduced without approval from the MTL management
The laboratory follows simple acceptance with a zero guard band as per ILAC G8.
-----x-------x end of test report x-------x-----
TM-03-02
ISSUE 2
Page 1 of 1
Standard requirements
Standard ASTM F1554
Grade 105
Yield Strength, minimum (MPa) 724
Tensile strength, minimum (MPa) 862-1034
Elongation, minimum (%) 15.0
Remarks
Technical Manager
The lab is responsible for all data except if provided by the client
Results relate only to the sample as received from the Customer
MTL is not responsible for samples after 15 days of the test date
The test report shall NOT be reproduced without approval from the MTL management
The laboratory follows simple acceptance with a zero guard band as per ILAC G8.
-----x-------x end of test report x-------x-----
TM-03-02
ISSUE 2
Page 1 of 1
Standard requirements
Standard ASTM F1554
Grade 105
Yield Strength, minimum (MPa) 724
Tensile strength, minimum (MPa) 862-1034
Elongation, minimum (%) 15.0
Remarks
Technical Manager
The lab is responsible for all data except if provided by the client
Results relate only to the sample as received from the Customer
MTL is not responsible for samples after 15 days of the test date
The test report shall NOT be reproduced without approval from the MTL management
The laboratory follows simple acceptance with a zero guard band as per ILAC G8.
-----x-------x end of test report x-------x-----
TM-03-02
ISSUE 2
Page 1 of 1
Standard requirements
Standard ASTM F1554
Grade 105
Yield Strength, minimum (MPa) 724
Tensile strength, minimum (MPa) 862-1034
Elongation, minimum (%) 15.0
Remarks
Technical Manager
The lab is responsible for all data except if provided by the client
Results relate only to the sample as received from the Customer
MTL is not responsible for samples after 15 days of the test date
The test report shall NOT be reproduced without approval from the MTL management
The laboratory follows simple acceptance with a zero guard band as per ILAC G8.
-----x-------x end of test report x-------x-----