Professional Documents
Culture Documents
TEST DETAILS
Initial & Final parameters Observed data Specified Values
Specimen type FLAT Ultimate load( kN) 8.08
Initial Width in (mm) 13.36 UTS (N/mm2 ) 267.606 250 Min
Specimen Thickness(mm) 2.26 Elongation (%) 6.8 6 Min
2
Cross sectional area(mm ) 30.19 0.2%Proof Stress( N/mm2) 254.358 200 Min
original gauge length(mm) 49.83 0.2%Proof Load( kN) 7.68
final gauge length (mm) 53.20
Extensometer (GL) 25
Result: The test results conforms to the above specification EN 755 Gr.6005-T6 Condition
Note: Attached Load Vs displacement & Stress Vs Strain with 0.2%proof line Curve in Annexure A
Authorized Signature
P.NAVEEN KUMAR
Format No CMSS/FM/48D(TT)
Technical Manager
Rev No.00: DT; 10-08-2017
Page2 of 2
ANNEXURE –A
Report No: CMSS/TT/18/503; Dated: 30-05-2018
Identification of the sample: 4010 Al. Door Section SSQAG/4010/M
Fig 1: Load(kN) Vs Displacement (mm), & Stress (N/mm2) Vs Strain with 0.2% proof line
Authorized Signature
P.NAVEEN KUMAR
Technical Manager
Page2 of 2