Professional Documents
Culture Documents
APPLICATIONS
• Sewage
• Waste water
FEATURES
• Non-clog single channel impeller
• Permit minimum 3” solid passage
• Dry pit is available as optional
SPECIFICATIONS
Pump
Liquid Type of liquid Sewage, Wastewater
Handled Temperature 0°C~40°C
Min solids size 76mm
Maximum Submergence 8m
Minimum Submergence Refer to water level (L.W.L.) in dimensions
It is possible to operate at low water level for 30min
Synchronous Speed 1500min-1
Mechanical seal Double mechanical seal
Construction Impeller Single channel, non-clog
Bearing Prelubricated bearing
Casing Cast iron
Impeller Cast iron
Material Shaft 403 Stainless steel
Mechanical Impeller side Silicon carbide
Seal Motor side Ceramic / Carbon
Packing NBR
Motor
Type 4 pole, air-filled watertight
Insulation Class F
Protection Built-in overload protector (2.2kW) ; Built-in temperature detector protection (3.7 - 22kW)
Ac c e ssorie s
Standard Submersible cable: 10m
Optional Quick discharge connector, Float switch (DML/DL only), Dry pit type (DML only)
SECTIONAL VIEW
DML
DML-50HZ - 1450min-1
80(1
00)
D ML
100 5 2.2
D ML
5 1.5
SYMBOLS
80 DML 5 2.2
Size
Model DL: Manual Version
M: Single Channel Impeller
Frequency 50Hz:5
Motor Output: kW
DML
According to JIS
100DML51.5 According to JIS
Testing Code B8301, B8302 100DML52.2 Testing Code B8301, B8302
-1 -1
50Hz (Nominal speed 1450min ) S.G.= 1.0 Vis.= 1.0 cSt 50Hz (Nominal speed 1450min ) S.G.= 1.0 Vis.= 1.0 cSt
Ft. m Ft. m
70
14
60 60 12
60 60
50 10 50 10
50 50
40 8 40 8
40 40
30 6 30 6
30 30
20 4 20 4
Efficiency (%)
Efficiency (%)
20 20
Total Head
Total Head
Total Head
Total Head
10 2 10 2
l/min. 0 100 200 300 400 500 600 700 800 900 1000 l/min. 0 200 400 600 800 1000 1200 1400 1800 2000 2200
Capacity
Capacity
USGPM USGPM
0 100 200 300 400 500 0 100 200 300 400 500
HP kW HP kW
4.0 3.0
2.0 2.0
Shaft Power
2.0
Shaft Power
2.0
1.0 1.0
DML
DIMENSION
Note:
DA DE DF DG DT DN DD
80 150 185 126 18 8 15
Note:
1/. For detailed dimensions of the
pumps, refer to separate dimension
data sheets.
DA DE DF DG DT DN DD
80 150 185 126 18 8 15
100 175 210 151 20 8 15
150 240 280 212 22 8 19