Professional Documents
Culture Documents
Description
Series RVP… check valves are size 16, high performan- are available. All external parts of the screw-in valves
ce screw-in valves with an M30x1,5 mounting thread. are burnished, allowing them to be stored and used
The valves are designed on the proven poppet/seat indoors without restriction. These valves are predo-
principle and are leak-tight in the flow direction B to minantly used in mobile and industrial applications
A. Different variants with a fixed opening pressure where leak-free shut-off in one direction is important.
Symbol
40.0 (570)
4)
30.0 (430)
3)
20.0 (285)
10.0 (140)
7.5 (107)
5.0 (70)
2)
2.5 (35)
1)
0
0 20 40 60 80 100 120 140 160
(5.0) (10) (15) (21) (26) (31) (36) (42)
Q [l/min (gpm)]
1) = RVP 16/0.3
2) = RVP 16/1
3) = RVP 16/15
4) = RVP 16/20
Ø31
Beispiel für die Masseinheit: (Ø1.22)
Example for the dimensional units:
24
PP PLOOLPHWHU
(.531)
0$
13.5
M30×1,5
(2.04)
52
(1.51)
38.5
Ø18.77×1.78
Installation information
NOTE! ATTENTION!
1) When fitting the screw-in cartridge valve, Only qualified personnel with mechanical
use the specified tightening torque. The value skills may carry out any maintenance work.
can be found in the chapter "Technical data". Generally, the only work that should ever be
undertaken is to check, and possibly replace,
the seals. When changing seals, oil or grease
NOTE! the new seals thoroughly before fitting them.
The seals are not available individually. The
seal kit order number can be found in the
chapter "Technical data".
Ra 3,2
-0.05
-0.1
min. 16.5
2
))
min. 22
+0.033
H8 ( 0 ))
34.15 ± 0.15
0
+0.039
max. 33.5
min. 41.5 (Ø 22 H8 (
43.15 ± 0.15
min. 8 (Ø 31
B
1.5
Y
A
A-B
Z Y
3:1 max. Ø 16.5 3:1
0.05
Ra 3,2
+0.039
Ø 31 H8 ( ) Ra 3,2
0
Ø 0.03 A
A
B
-0.05
Ra 1,6 -0.1
+0.033
Ø 22 H8 ( 0 )
Ra 1,6
min. Ø 30.8
min. Ø 21.8
Toleranzen nach:
HINWEIS! Tolerances according to: DIN ISO 2768-mK
NOTE!
-0.1 +0.2
Empfohlene Anschlussbohrungen: -0.2 +0.1
A, B: Ø 16 Ra 6,3
Recommended connection bores:
NOTE!
You must maintain the specified positio-
nal and diametral tolerances. To ensure
trouble-free operation of the screw-in car-
tridges, we strongly recommend that pilot
drilling, boring, reaming and cavity thread-cut-
ting are always performed in one setup.
info.ch@bucherhydraulics.com www.bucherhydraulics.com