Contract No. : S103-2150 Customer : Date of Manufacture : May-21 1. Specification of Product Item Hoist Trolley Model 3HAM6 -- MFG.No. 21E9846004 -- Lifting Load (t) -- -- Rated Load (t) 3 -- Lift (m) 12 -- Rating 25 %ED 250 S/h -- %ED -- S/h Phase 3 -- Rated Voltage (V) 380 -- Rated Frequency (Hz) 50 -- Speed (m/min) 5.0 -- Motor Output (kW) 2.6 -- Total Full-Loaded Current (A) 8.0 -- Wire Rope φ 14 6×Fi(29)-B -- 2. Test Result (Test Load: 3t Test Power Source: 380V50Hz ) Speed Result Item Standard Main Creep Total Full-Loaded Lifting Equal to or less then the total current value of the hoist 7.0 -- GOOD Current Test Lowering indicated in the table. 5.3 -- GOOD (A) Equal to or less then the total current value of the trolley Traversing -- -- -- indicated in the table. Lifting 5.1 -- GOOD Speed Test Lowering See remarks below. 5.5 -- GOOD (m/min) Traversing -- -- -- Braking Test Lowering Slip distance to be equal to or less than 1% of lifting distance. 15 -- GOOD (mm) Hoisting, lowering, and traversing to be possible at 90% of Minimum Starting Voltage Test -- GOOD rated voltage. Further hoisting after the activation of overwind prevention Overwind Prevention Test device halts the winding operation should be 50mm or -- GOOD [No Load] more in length. Insulation Resistance Test Equal to or more then 1MΩ when measured by 500V (MΩ) -- GOOD Insulation tester. After applying a voltage of 2112V for one second, each Withstand Voltage Test -- GOOD part to be normal. Appearance Test Dimensions, nameplate, paint color is as instructed in drawing. -- GOOD Judgement Approved Remarks Criteria for the lifting, lowering, and traversing speed: The speed should fall within the range indicated in the table below. This range shall be subject to the hoist speed or trolley speed in the above specification. Speed Lifting Lowering Speed Traversing Under 2m/min ±20% -20~+25% Under 4m/min ±20% 2m/min or more ±10% -10~+25% 4m/min or more ±10%