Professional Documents
Culture Documents
Tolerances and Measuring Technnology - Nhom 01FIE: Câu hỏi
Tolerances and Measuring Technnology - Nhom 01FIE: Câu hỏi
/ CHAPTER 1_Introduction to Tolerances and Fits / Review Chapter 1 (English) No score, only for practicing
Câu hỏi 1
Sai
With a given fit of D = Ø42 and d = Ø42 , reselect the shaft so that the average of interference equals to 45,5μm.
Select one:
a. Ø42 . Your answer is
incorrect
b. Ø42+0,016.
c. Ø42 .
d. Ø42 .
https://fhqx.hcmute.edu.vn/mod/quiz/review.php?attempt=5098138&cmid=1147978 1/18
10/20/23, 3:52 PM Review Chapter 1 (English) No score, only for practicing: Xem lại lần làm thử
Câu hỏi 2
Sai
Select a transition fit in which the probability of interference is much greater than the one of clearance when assembling at random.
Select one:
a. D = Ø50+0,025 ; d = Ø50 .
b. D = Ø50±0,012 ; d = Ø50±0,008.
d. D = Ø50+0,025 ; d = Ø50 .
Câu hỏi 3
Sai
Select one:
a.
b. Your answer is
incorrect
c.
d.
https://fhqx.hcmute.edu.vn/mod/quiz/review.php?attempt=5098138&cmid=1147978 2/18
10/20/23, 3:52 PM Review Chapter 1 (English) No score, only for practicing: Xem lại lần làm thử
Câu hỏi 4
Đúng
Calculate the limits of size dmax and dmin in the above detail drawing:
Select one:
a. dmax = Ø29,060 and dmin = Ø29,073
Câu hỏi 5
Đúng
A series of shafts have Td = 23μm, dmin = Ø35,983mm. Designating size of the shafts on the detail drawing is as follows:
Select one:
a. Ø36
b. Ø36
d. Ø36
https://fhqx.hcmute.edu.vn/mod/quiz/review.php?attempt=5098138&cmid=1147978 3/18
10/20/23, 3:52 PM Review Chapter 1 (English) No score, only for practicing: Xem lại lần làm thử
Câu hỏi 6
Sai
Match diameters of hole and shaft in the two following columns in order to create all interference fits.
Select one:
a. 1–b ; 1–d ; 3–b ; 3–d.
https://fhqx.hcmute.edu.vn/mod/quiz/review.php?attempt=5098138&cmid=1147978 4/18
10/20/23, 3:52 PM Review Chapter 1 (English) No score, only for practicing: Xem lại lần làm thử
Câu hỏi 7
Sai
From the assembly drawing of the below machine unit, determine dimensions of valse hole 3 and cylindrical stem 6.
Select one:
a. Ø12+0,018 is hole diameter of valse 3 and Ø12 is diameter of cylindrical stem 6.
c. Ø12+0,018 is hole diameter of valse 3 and Ø12±0,0055 is diameter of cylindrical stem 6. Your answer is
incorrect.
The correct answer is: Ø12+0,018 is hole diameter of valse 3 and Ø12 is diameter of cylindrical stem 6.
https://fhqx.hcmute.edu.vn/mod/quiz/review.php?attempt=5098138&cmid=1147978 5/18
10/20/23, 3:52 PM Review Chapter 1 (English) No score, only for practicing: Xem lại lần làm thử
Câu hỏi 8
Sai
Select the type of fit for the joint between the V pulley 7 and the shaft 2:
Select one:
a. Clearance fit.
c. Transition fit.
d. Interference fit.
Câu hỏi 9
Không trả lời
With given holes having D = Ø24+0,021, choose the size of the shafts d so that when assembled, it will create a transition fit in which the
probability of clearance is greater than that of interference.
Select one:
a. d = Ø24 .
b. d = Ø24±0,0065.
c. d = Ø24 .
d. d = Ø24+0,013.
https://fhqx.hcmute.edu.vn/mod/quiz/review.php?attempt=5098138&cmid=1147978 6/18
10/20/23, 3:52 PM Review Chapter 1 (English) No score, only for practicing: Xem lại lần làm thử
Câu hỏi 10
Không trả lời
From the chosen fit between the outer diameter of the plain bearings and the holes of Ø16 in the part drawing below, determine the hole
diameter D of the part holes and outer diameter d of the plain bearings.
Select one:
a. D = Ø16±0,009 ; d = Ø16 .
b. D = Ø16+0,018 ; d = Ø16-0,011.
c. D = Ø16+0,018 ; d = Ø16 .
d. D = Ø16±0,009 ; d = Ø16±0,11.
Câu hỏi 11
Không trả lời
Select one:
a. machining spare parts in common machines
The correct answer is: machining and assembly process in a factory’s production line.
https://fhqx.hcmute.edu.vn/mod/quiz/review.php?attempt=5098138&cmid=1147978 7/18
10/20/23, 3:52 PM Review Chapter 1 (English) No score, only for practicing: Xem lại lần làm thử
Câu hỏi 12
Không trả lời
Choose proper limits of size for outer diameter d of the plain bearing in order to assemble with the housing bore D = Ø50+0,025
Select one:
a. dmin = Ø49,984 ; dmax = Ø50.
Câu hỏi 13
Không trả lời
With a given fit having D = Ø45 and d = Ø45 mm, calculate Smax , Smin , Nmax , Nmin of the fit.
Select one:
a. Smax = 13µm ; Smin = 0 ; Nmin = 16µm ; Nmax = 50µm.
b. Smax = 50µm ; Smin = Nmin = 0 ; Nmax = 13µm.
c. Smax = 13µm ; Smin = Nmin = 0 ; Nmax = 50µm.
d. Smax = 50µm ; Smin = 17µm ; Nmin = 9µm ; Nmax = 23µm.
The correct answer is: Smax = 13µm ; Smin = Nmin = 0 ; Nmax = 50µm.
https://fhqx.hcmute.edu.vn/mod/quiz/review.php?attempt=5098138&cmid=1147978 8/18
10/20/23, 3:52 PM Review Chapter 1 (English) No score, only for practicing: Xem lại lần làm thử
Câu hỏi 14
Không trả lời
Select one:
a. An interference fit with TN = 0,057.
Câu hỏi 15
Không trả lời
With nominal size D = d = Ø30, maximum and minimum diameters of holes and shafts in the below diagram of tolerance disposition are:
Select one:
a. Dmax = Ø30,016 ; Dmin = Ø29,989 ; dmax = Ø29,98 ; dmin = Ø29,79.
The correct answer is: Dmax = Ø30,016 ; Dmin = Ø29,989 ; dmax = Ø29,998 ; dmin = Ø29,979.
https://fhqx.hcmute.edu.vn/mod/quiz/review.php?attempt=5098138&cmid=1147978 9/18
10/20/23, 3:52 PM Review Chapter 1 (English) No score, only for practicing: Xem lại lần làm thử
Câu hỏi 16
Không trả lời
Select one:
a. D = Ø120 ; d = Ø120±0,027.
b. D = Ø120-0,047 ; d = Ø120 .
c. D = Ø120 ; d = Ø120 .
d. D = Ø120 ; d = Ø120-0,047.
Câu hỏi 17
Không trả lời
Select one:
a. 41μm.
b. 49μm.
c. 45μm.
d. 51μm.
https://fhqx.hcmute.edu.vn/mod/quiz/review.php?attempt=5098138&cmid=1147978 10/18
10/20/23, 3:52 PM Review Chapter 1 (English) No score, only for practicing: Xem lại lần làm thử
Câu hỏi 18
Không trả lời
Select one:
a. Smax = 16μm and Nmax = 15μm
Câu hỏi 19
Không trả lời
Choose a series of holes for assembling the following shafts Φ30 in order to create a clearance fit with the average clearance Stb =
23,5μm.
Select one:
a. D = Ø30+0,016
b. D = Ø30
c. D = Ø30
d. D = Ø30
https://fhqx.hcmute.edu.vn/mod/quiz/review.php?attempt=5098138&cmid=1147978 11/18
10/20/23, 3:52 PM Review Chapter 1 (English) No score, only for practicing: Xem lại lần làm thử
Câu hỏi 20
Không trả lời
With a given fit having D = Ø120-0,035 , d = Ø120 , calculate tolerance of the fit.
Select one:
a. 49μm
b. 25μm
c. 51μm
d. 65μm
Câu hỏi 21
Không trả lời
From the fit between helical gears and shaft portions 3, 4 of an intermittent shaft in a double reduction gearbox, determine dimensions of
gear bore and shaft.
Select one:
a. D = Ø50-0,025 and d = Ø50±008.
https://fhqx.hcmute.edu.vn/mod/quiz/review.php?attempt=5098138&cmid=1147978 12/18
10/20/23, 3:52 PM Review Chapter 1 (English) No score, only for practicing: Xem lại lần làm thử
Câu hỏi 22
Không trả lời
With a given fit having D = Ø45 and d = Ø45 mm, calculate Smax , Smin , Nmax , Nmin of the fit.
Select one:
a. Smax = 14µm ; Smin = Nmin = 0 ; Nmax = 42µm.
b. Smax = 42µm ; Smin = Nmin = 0 ; Nmax = 14µm.
c. Smax = 14µm ; Smin = 17µm ; Nmin = 6µm ; Nmax = 42µm.
d. Smax = 14µm ; Smin = 0 ; Nmin = 17µm ; Nmax = 42µm.
The correct answer is: Smax = 14µm ; Smin = Nmin = 0 ; Nmax = 42µm.
Câu hỏi 23
Không trả lời
Choose the proper limits of size for hole D of the plain pulley and shaft diameter d (the left end of the shaft) in the assembly drawing.
Select one:
a. Dmin = Ø40 ; Dmax = Ø40,039 and dmin = Ø40,002 ; dmax = Ø40,018.
The correct answer is: Dmin = Ø39,941 ; Dmax = Ø39,964 and dmin = Ø39,984 ; dmax = Ø40.
https://fhqx.hcmute.edu.vn/mod/quiz/review.php?attempt=5098138&cmid=1147978 13/18
10/20/23, 3:52 PM Review Chapter 1 (English) No score, only for practicing: Xem lại lần làm thử
Câu hỏi 24
Không trả lời
Choose the correct answer for the width of slot B = 100 in the part drawing
Select one:
a. ES = -0,024 ; EI = -0,059 ; TB = 0,035.
https://fhqx.hcmute.edu.vn/mod/quiz/review.php?attempt=5098138&cmid=1147978 14/18
10/20/23, 3:52 PM Review Chapter 1 (English) No score, only for practicing: Xem lại lần làm thử
Câu hỏi 25
Không trả lời
Choose the type of fit for the rolling bearing 26 and shaft I of the below reduction gearbox.
Select one:
a. Interference fit with very small interference amount.
b. Transition fit.
The correct answer is: Interference fit with very small interference amount.
https://fhqx.hcmute.edu.vn/mod/quiz/review.php?attempt=5098138&cmid=1147978 15/18
10/20/23, 3:52 PM Review Chapter 1 (English) No score, only for practicing: Xem lại lần làm thử
Câu hỏi 26
Không trả lời
Suggest the suitable dimensions for assembling the idle gear on the shaft.
Select one:
a. D = Ø55+0,030 and d = Ø55±0,0095.
Câu hỏi 27
Không trả lời
With the number of holes and shafts N = 10.000 pcs in the below transition fit, compare the probability of clearance and interference of the
fit.
Select one:
a. Probability of interference is much bigger than probability of clearance.
The correct answer is: Probability of interference is much bigger than probability of clearance.
https://fhqx.hcmute.edu.vn/mod/quiz/review.php?attempt=5098138&cmid=1147978 16/18
10/20/23, 3:52 PM Review Chapter 1 (English) No score, only for practicing: Xem lại lần làm thử
Câu hỏi 28
Không trả lời
With nominal size D = d = Ø30, maximum and minimum diameters of holes and shafts in the below diagram of tolerance disposition are:
Select one:
a. Dmax = Ø29,964 ; Dmin = Ø29,943 ; dmax = Ø30 ; dmin = Ø29,967.
The correct answer is: Dmax = Ø29,976 ; Dmin = Ø29,943 ; dmax = Ø30 ; dmin = Ø29,979.
Câu hỏi 29
Không trả lời
With a given fit having and , determine the average clearance of fit.
Select one:
a. 64μm
b. 40μm
c. 64,5μm
d. 46μm
https://fhqx.hcmute.edu.vn/mod/quiz/review.php?attempt=5098138&cmid=1147978 17/18
10/20/23, 3:52 PM Review Chapter 1 (English) No score, only for practicing: Xem lại lần làm thử
Câu hỏi 30
Không trả lời
Dimension of a hole on the part drawing is D = Ø60±0,0065mm. Calculate the limits of size and tolerance.
Select one:
a. Dmax = Ø60,0065mm ; Dmin = Ø59,9935mm ; TD = 0,013mm
Chuyển tới...
https://fhqx.hcmute.edu.vn/mod/quiz/review.php?attempt=5098138&cmid=1147978 18/18