Professional Documents
Culture Documents
Extruding Machine
Page 1
纹峰面硬度 R2~R3 度. Adopted SACM alloy with nitrogen treatment and precise grinding,
the surface’s hard degree is higher than that of the screw thread: R2~R3 degree
b. 螺筒内径Φ50mm Inner diameter: Φ50mm
(5).齿轮箱: 仿意大利型…………………………………………….常州国茂产
Gearbox:………………………Produced by CHANGZHOU GUOMAO
i. 箱体材料: 铸钢 Body material: Cast steel
ii. 齿轮材料: 高铬合金钢; Gear material: chrome alloy
iii. 齿面处理: 采用高周波硬化处理, 并经精密研磨, 具抗磨损、低噪声之特性.
Gear surface treatment: Hard treatment .Characteristics: Wear-out resistance and low noise.
(6).加热及冷却: 整机四段加热. Heat up and cooling: four segments heating up
a.机身: 三段加热; Body part three segments heating up
b.机颈: 一段加热; Neck part: one segments heating up.
c.冷却: 三段冷却, 配离心式风机; Cooling: three segments cooling, with centrifugal wind
machine.
d. 控制: 加热器配合三台冷却吹风机交替进行加热和冷却, 温度可以在 0~399℃范围内
全自动调节, 当实际温度高于设定温度时, 电脑自动切断加热组件之电源, 同时接通冷却吹风机
电源. Controlling: heater works with four cooling wind machine, alternating heating up and cooling
down. The temperature can be adjust automatically from 0 to 399℃.
(9).吸料机及干燥料斗
Feeding machine and hopper dryer
a. 干燥机: THD-25 型, 容量 25kg, 具有无料报警之功能. Hopper dryer:SHD-25 model,
capacity 25kg, alarm system for out of material.
b. 吸料机: TAL-300 型, 吸料量 300kg/h. Feeding machine: SAL-300 model, feeding
capacity 300kg/hr.
(10).动力: 11kw 变频电机+变频器控制 Power :11 kw inverter motor & inverter controller
a. 11kw 变频电机…………………………………..…………..东莞电机
11 kw inverter motor………………………………………DONGGUAN MOTOR
b. 11kw 变频器………………………………………………….日本安川牌
11 kw inverter controller ……………………………YASKAWA, Japan
2.机头:Cross Head:
a.机头型式: 共挤型. 可做单层、双层、双色。Model: co-extrusion type. Can make single-
layer, double-layer and double-color.
b.机头材料: 铝铬锰合金钢制作.Material: (SACM) aluminum chromium manganese alloy steel
c.技术处理: 机头表面氮化处理, 流道经过精密加工及镀硬铬处理, 光洁度高;Technical
treatment: nitrogen vulcanizing treatment of surface and plating chromium treatment. Gloss
surface.
3.主控柜: 所有电器采用进口原件. Control cabinet:
(1). 电源: 380V, 3 相, 50Hz; Power supply: 380V, three phases, 50Hz.
Φ50 Wire & Cable
Extruding Machine
Page 3