Professional Documents
Culture Documents
Bhubaneswar DO
PURCHASE REQUISITION FOR SERVICES
Creation Date : 10.05.2022 PR No. : 7558376
Change Date : 10.05.2022 Print Date : 10.05.2022
Tracking No. : BBSRDO Rel.Status : OK
Created by : 00514359 Purch.Gr : M50
Department : Engineering Budget Head:
Document Type : Standard PR
Name of work:
Schedule of Rate for Bhubaneswar Divisional Office under Odisha State Office.
___________________________________________________________________________________
Page 1 of 269
Works Purchase Requisition: 7558376 File Ref. No.: BBSRDO
Date: 10.05.2022
unobjectionable place.
00040 MPLCN00400 1.000 M3 723.20 723.20
Earth work in rough excavation,
banking excavated earth in layers
not exceeding 20 cm in depth,
breaking clods watering, rolling
each
layer with ½ tonne roller or wooden
or steel rammers, and rolling
every 3rd and top-most layer with
power roller of minimum 8 tonnes
and dressing up in embankments for
roads, flood banks, marginal
banks and guide banks or filling up
ground depressions, within site
and lift upto 1.5 m for ALL KINDS
OF SOIL
00050 MPLCN005XX
Earth work in excavation by
mechanical means (Hydraulic
excavator) / manual means over
areas (exceeding 30 cm in depth,
1.5m in width as well as 10 sqm on
plan) including taking out and
disposal of excavated earth within
or outside site to unobjectionable
place and lift upto 1.5m, as
directed by Engineer-in-charge.
Disposed earth to be levelled and
neatly dressed. Extra for
levelling & neatly dressing of
disposed soil completely to be paid
separately as per item no.
MPLCN00600
00060 MPLCN00501 1.000 M3 176.10 176.10
i) All kinds of Soil
00070 MPLCN00502 1.000 M3 341.31 341.31
ii) Ordinary rock
00080 MPLCN00503 1.000 M3 590.39 590.39
iii) Hard Rock(Requiring Blasting)
00090 MPLCN00504 1.000 M3 984.08 984.08
iv) Hard Rock (Blasting Prohibited)
chiesel/pneumatic drilling
00100 MPLCN00600 1.000 M3 64.25 64.25
Extra for levelling & neatly
dressing of disposed soil
completely as directed by engineer
in charge
00110 MPLCN007XX
Earth work in excavation by
mechanical means (Hydraulic
excavator) / manual means in
foundation trenches or drains (not
___________________________________________________________________________________
Page 2 of 269
Works Purchase Requisition: 7558376 File Ref. No.: BBSRDO
Date: 10.05.2022
kerbs&steps etc
01220 MPLCN02903 1.000 M2 710.52 710.52
iii) Columns, piers, abutment,
pillars,posts & struts
01230 MPLCN030XX
Providing and fixing up to floor
five level PRECAST CEMENT CONCRETE
string or lacing courses, copings,
bed plates, anchor blocks, plain
window sills, shelves, louvers,
steps, stair cases, etc.
including
hoisting and setting in position
with cement mortar 1:3 (1 Cement : 3
coarse sand), cost of required
centering complete
01240 MPLCN03001 1.000 M3 8,275.82 8,275.82
i) 1:2:4( 1 Cement:2 Coarse sand:4
graded stone aggregate 20mm
nominal size)
01250 MPLCN03002 1.000 M3 7,354.47 7,354.47
ii) 1:3:6( 1 Cement:3 Coarse sand:6
graded stone aggregate 20mm
nominal size)
01260 MPLCN03003 1.000 M3 8,267.95 8,267.95
iii) 1:1.5:3( 1 Cement :1.5 Coarse
sand: 3 graded stone aggregate
20mm nominal size)
01270 MPLCN03100 1.000 M3 7,295.77 7,295.77
Providing & fixing at or near
ground level PRECAST CEMENT
CONCRETE in kerbs, edgings etc. as
per approved pattern and setting
in position with cement mortar 1:3
(1 Cement:3 coarse sand) including
the cost of required centering,
shuttering complete. 1:1.5:3 (1
Cement
: 1.5 Coarse sand : 3 graded stone
aggregate 20mm nominal size)
01280 MPLCN032XX
Providing and laying in position
ready mixed plain cement concrete,
with cement content as per approved
design mix and manufactured in
fully automatic batching plant and
transported to site of work in
transit mixer for all leads, having
___________________________________________________________________________________
Page 13 of 269
Works Purchase Requisition: 7558376 File Ref. No.: BBSRDO
Date: 10.05.2022
nominal size).
01620 MPLCN043XX
Supply of Steel reinforcement for
R.C.C. including straightening,
cutting, bending, placing in
position and binding all complete
at all levels
01630 MPLCN04301 1.000 KG 79.50 79.50
i) Mild steel,medium tensile steel
bars etc conforming to IS 432-I&II
01640 MPLCN04302 1.000 KG 80.86 80.86
ii) Thermo Mechanically Treated
Bars of Fe- 500D grade or more,
conforming to IS1786
01650 MPLCN044XX
Providing and laying in position,
machine batched & machine mixed
design mix M-25 grade cement
concrete for reinforced cement
concrete
work, using cement content as per
approved design mix,
including pumping of concrete to
site of laying but excluding the
cost of centering, shuttering,
finishing and reinforcement.
Including
admixtures in recommended
proportions as per IS 9109 to
accelerate,
retard setting of concrete,improve
workability without impairing
strength and durability as per
direction of Engineer-in-charge.
(Note :- Cement content considered
in this item is @ 330 kg/cum. Less
cement used as per design mix (if
any) will be recoverable separately.
No extra payment against extra
cement if used shall be payable.
01660 MPLCN04401 1.000 M3 7,744.58 7,744.58
i) M-25 grade reinforced cement
concrete UP TO PLINTH LEVEL
01670 MPLCN04402 1.000 M3 9,103.77 9,103.77
ii) M-25 grade reinforced cement
concrete ABOVE PLINTH & UP
TO FLOOR 5 LEVEL
01680 MPLCN045XX
___________________________________________________________________________________
Page 19 of 269
Works Purchase Requisition: 7558376 File Ref. No.: BBSRDO
Date: 10.05.2022
6 Coarse sand)
02090 MPLCN05700 1.000 M3 5,927.38 5,927.38
Providing and laying random rubble
masonry with hard stone
in foundation and plinth including
levelling up with cement concrete
1:6:12 (1 cement : 6 coarse sand:
12 graded stone aggregate 20mm
nominal size) upto plinth level in
CM 1:6 (1 cement : 6 coarse sand)
02100 MPLCN058XX
Providing and laying random rubble
masonry with hard stone
in superstructure above plinth
level and upto floor five level,
including levelling up with cement
concrete 1:6:12 (1 cement : 6
coarse sand: 12 graded stone
aggregate 20mm nominal size) at
window
sills, ceiling level & the like
02110 MPLCN05801 1.000 M3 7,253.26 7,253.26
i) RR masonry in Cement mortar 1:6
(1 cement : 6 coarse sand)
02120 MPLCN05802 1.000 M3 705.48 705.48
ii) Extra for random rubble masonry
with hard stone in Square
or rectangular pillars
02130 MPLCN05803 1.000 M3 1,961.50 1,961.50
iii) Extra for random rubble
masonry with hard stone in Circular
pillars
02140 MPLCN059XX
Providing and laying coursed rubble
masonry with Hard stone in
02150 MPLCN05901 1.000 M3 7,081.08 7,081.08
i) 1st Sort stone in Cement mortar
1:6 (1 cement : 6 coarse sand)
IN FOUNDATION & PLINTH
02160 MPLCN05902 1.000 M3 6,590.20 6,590.20
ii) 2nd Sort stone in Cement mortar
1:6 (1 cement : 6 coarse sand)
IN FOUNDATION & PLINTH
02170 MPLCN060XX
Providing and laying coursed rubble
masonry with Hard stone (first or
second sort) in superstructure
above plinth level and upto floor
___________________________________________________________________________________
Page 26 of 269
Works Purchase Requisition: 7558376 File Ref. No.: BBSRDO
Date: 10.05.2022
five level
02180 MPLCN06001 1.000 M3 8,442.51 8,442.51
i) masonry work (first sort) in CM
1:6
02190 MPLCN06002 1.000 M3 7,951.62 7,951.62
ii) masonry work (second sort) in
CM 1:6
02200 MPLCN06003 1.000 M3 584.09 584.09
iii) Extra for CR masonry with hard
stone (first or second sort)
in Square or rectangular pillars
02210 MPLCN06004 1.000 M3 2,228.91 2,228.91
iv) Extra for CR masonry with hard
stone (first or second sort)
in Circular pillars
02220 MPLCN061XX
Providing & laying Stone work in
plain ashlar in super structure upto
floor five level in cement mortar
1:6 (1 cement : 6 coarse sand)
including pointing with cement
mortar 1:2 (1 white cement : 2
stone dust) with an admixture of
pigment matching the stone shade
02230 MPLCN06101 1.000 M3 45,642.58 45,642.58
i) One face dressed Ashlar masonry
with Red Sand Stone
02240 MPLCN06102 1.000 M3 67,404.44 67,404.44
ii) One face dressed Ashlar masonry
with White/Other Sand Stone
02250 MPLCN06103 1.000 M3 62,247.72 62,247.72
iii) Both face dressed Ashlar
masonry with Red Sand Stone
02260 MPLCN06104 1.000 M3 84,009.59 84,009.59
iv) Both face dressed Ashlar
masonry with White/Other Sand Stone
02270 MPLCN062XX
Providing and laying Stone work
ashlar punched (ordinary) in
Superstructure upto floor 5 level
in cement mortar 1:6 (1 white
cement : 6 coarse sand) including
pointing with cement mortar 1:2
(1 white cement : 2 stone dust)
with an admixture of pigment
matching the stone shade.
02280 MPLCN06201 1.000 M3 43,091.82 43,091.82
i) One faced Punched Ashlar masonry
___________________________________________________________________________________
Page 27 of 269
Works Purchase Requisition: 7558376 File Ref. No.: BBSRDO
Date: 10.05.2022
02460 MPLCN067XX
Providing and fixing cramps of
required size & shape in RCC/ CC
backing with cement mortar 1:2 ( 1
cement :2 coarse sand) including
drilling necessary hole in stones
and embedding the cramp in the hole
02470 MPLCN06701 1.000 KG 608.01 608.01
i) Gunmetal cramps
02480 MPLCN06702 1.000 KG 593.25 593.25
ii) Stainless steel cramps
02490 MPLCN06800 1.000 M2 356.37 356.37
Mirror polishing on marble
work/Granite work/stone work
wherever
required to give high gloss finish
complete.
02500 MPLCN06900 1.000 M2 3,707.22 3,707.22
Supplying and fixing of 10mm thick
mirror polished
black granite tiles for pump island
edges etc. over
12mm thick CM 1:4 including cost of
all materials
and labour etc. complete.
02510 MPLCN070XX
Providing wood work in frames of
doors, windows, clerestory windows &
other frames, wrought framed and
fixed in position with hold fast
lugs or with dash fasteners of
required dia & length
02520 MPLCN07001 1.000 M3 126,069.14 126,069.14
i) Second class teak wood
02530 MPLCN07002 1.000 M3 101,998.75 101,998.75
ii) Sal wood
02540 MPLCN07003 1.000 M3 69,479.14 69,479.14
iii) Kiln seasoned and chemically
treated Hollock wood
02550 MPLCN071XX
Providing wood work in frames of
false ceiling, partitions etc. sawn
and fixed in position with
necessary stainless steel screws
etc.
02560 MPLCN07101 1.000 M3 92,863.56 92,863.56
i) Sal wood
02570 MPLCN07102 1.000 M3 60,151.58 60,151.58
___________________________________________________________________________________
Page 30 of 269
Works Purchase Requisition: 7558376 File Ref. No.: BBSRDO
Date: 10.05.2022
wood
02920 MPLCN08400 1.000 M 651.83 651.83
Providing & fixing 18 mm thick, 150
mm wide pelmet of flat pressed 3
layer or graded wood particle board
of medium density grade I,
IS:3087 marked including top cover
of 6 mm commercial ply wood
conforming to IS: 309 BWR
grade,nickel plated M.S.pipe 20mm
dia
(heavy type) curtain rod with
nickel plated brackets, including
fixing
with 25x 3 mm MS flat 10 cmlong
fixed to pelmet with hollock wood
cleats of size 100x40x40mm on both
inner side of pelmet and raw plugs
75mm long etc all complete with
decorative veneering on both sides
and
including providing and fixing teak
wood lipping of size 25x3mm with
02930 MPLCN08500 1.000 M 150.73 150.73
Providing & fixing nickel plated
20mm dia MS pipe(heavy type) curtain
rods with nickel plated brackets :
02940 MPLCN08600 1.000 KG 160.07 160.07
Providing & fixing MS grills of
required pattern in frames of
windows
etc. with M.S. flats, square or
round bars etc.including priming
coat
with approved steel primer (fixed
to steel windows by welding)
all complete.
02950 MPLCN08700 1.000 M2 1,097.54 1,097.54
Providing & fixing fly proof
galvanised M.S. wire gauze to
windows and
clerestory windows using wire gauge
with average width of aperture
1.4 mm in both directions with wire
of dia. 0.63 mm with 2nd class
teak woodbeading 62x19 mm all
complete
02960 MPLCN08800 1.000 EA 74.86 74.86
___________________________________________________________________________________
Page 35 of 269
Works Purchase Requisition: 7558376 File Ref. No.: BBSRDO
Date: 10.05.2022
micron)
03630 MPLCN11700 1.000 M 76.94 76.94
Filling the gap in between
aluminium frame & adjacent RCC/
Brick/
Stone work by providing weather
silicon sealant over backer rod of
approved quality as per direction
of Engineer in Charge complete
Upto 5mm depth and 5mm width
03640 MPLCN118XX
Providing and fixing aluminium
tubular handle bar 32 mm outer dia,
3.0 mm thick & 2100 mm long with SS
screws etc. complete as per
direction of Engineer-in-Charge.
03650 MPLCN11801 1.000 EA 544.82 544.82
i) Powder coated minimum thickness
50 micron aluminium
tubular handle bar
03660 MPLCN11802 1.000 EA 557.50 557.50
ii) Polyester powder coated minimum
thickness 50 micron
aluminium tubular handle bar
03670 MPLCN11900 1.000 EA 444.06 444.06
Providing and fixing Brass 100mm
mortice latch and lock with 6 levers
without pair of handles (best make
of approved quality) for aluminium
doors including necessary cutting
and making good etc. complete.
03680 MPLCN120XX
Providing and fixing aluminium
casement windows fastener of
required length for aluminium
windows with necessary screws etc.
complete.
03690 MPLCN12001 1.000 EA 69.28 69.28
i) Powder coated minimum thickness
50micron aluminium
03700 MPLCN12002 1.000 EA 68.03 68.03
ii) Polyester powder coated minimum
thickness 50 micron aluminium
03710 MPLCN121XX
Providing and fixing aluminium
round shape handle of outer dia
100mm with SS screws etc. complete
as per direction of Engineer-in-
___________________________________________________________________________________
Page 47 of 269
Works Purchase Requisition: 7558376 File Ref. No.: BBSRDO
Date: 10.05.2022
charge
03720 MPLCN12101 1.000 EA 80.96 80.96
i) Powder coated minimum thickness
50 micron aluminium
03730 MPLCN12102 1.000 EA 86.14 86.14
ii) Polyester powder coated minimum
thickness 50 micron aluminium
03740 MPLCN12200 1.000 KG 503.43 503.43
Providing & fixing anodised
aluminium grill (anodised
transparent
or dyed to required shade according
to IS:1868 with minimum anodic
coating of grade AC 25 of approved
design/pattern, with approved
standard section & fixed to the
existing window frame with C.P.brass
/stainless steel screws @ 200mm
centre to centre, including
cutting the grill to proper opening
size for fixing and operation of
handles and fixing approved
anodised aluminium standard section
around the opening, all complete as
per requirement and direction of
Engineer-in-charge.(Only weight of
grill to be measured for payment)
03750 MPLCN12300 1.000 M2 4,307.35 4,307.35
Providing and fixing 12 mm thick
frameless toughened glass door
shutter of approved brand and
manufacture, including providing and
fixing top & bottom pivot & double
acting hydraulic floor spring type
fixing arrangement and making
necessary holes etc for fixing
required
door fittings, all complete as per
direction of Engineer-in-charge
(Door handle, lock and stopper etc.
to be paid separately).
03760 MPLCN12400 1.000 KG 83.33 83.33
Structural steel work in single
section fixed with or without
connecting plate including cutting,
hoisting, fixing in position and
applying a priming coat of approved
steel primer all complete.
___________________________________________________________________________________
Page 48 of 269
Works Purchase Requisition: 7558376 File Ref. No.: BBSRDO
Date: 10.05.2022
and factory
fabrication of Pre-engineered steel
structures such as columns,
column bracings, sheeting posts,
rafters, roof bracings, struts,roof
purlins, side runners, sag angles,
sag rods, chequered plates,
stair cases, ladder, Anchor bolts
(anchor bolts supply by Pre
Engineered Beam vendor and fixing
shall be carried out by civil
contractor) etc and all other
structural items as required in
case of
canopies at ROs. This includes
surface prepartion by
shot/grit/copper
slag blasting to Swedish Standard
SA 2½ for painting, supply and
application of Painting for
structural members as per
specifications
(Primer coat: Red Oxide Zinc
Phosphate Primer (P3), DFT 60-70 µm
(2 coats of 30-35 µm); Finish coat:
Synthetic Enamel
Paint (F6), DFT 40-50 µm (2 coats
of 20-25 µm); Total DFT
shall be minimum 100 µm) at site of
approved colour, including
loading, transportation, unloading,
delivery at erection site, storage
and handling at site, site assembly
and finally erection of structures
at appropriate location, alignment
and bolting/welding of all
structures true to line, level,
plumb and dimension. The work shall
be completed in all respect as per
drawings, technical specification
and direction of the
Engineer-in-Charge.
(Payment shall be made based on
approved fabrication drawings)
03990 MPLCN13800 1.000 M2 482.60 482.60
40mm Thick Cement concrete flooring
1:2:4 (1 cement : 2 coarse sand:4
stone aggregate of 20mm nominal
___________________________________________________________________________________
Page 53 of 269
Works Purchase Requisition: 7558376 File Ref. No.: BBSRDO
Date: 10.05.2022
embedding
with 24 G wire netting and sealing
the joints with polymerized
mastic, all complete as per
direction of Engineer-in-Charge.
04440 MPLCN16900 1.000 M2 306.41 306.41
Providing and fixing thermal
insulation with Resin Bonded Fibre
glass
wool conforming to IS: 8183 having
density 24 kg/m3, 50 mm thick
wrapped in 200G Virgin Polythene
Bags fixed to wall with screw,rawel
plug and washers and held in
position by criss crossing GI wire
etc.
complete as per directions of
Engineer-in-Charge.
04450 MPLCN170XX
Providing & fixing M.S. holder bat
clamps of approved design to C.I.
or S.C.I. rain water pipes embedded
in and including cement concrete
blocks 10x10x10cm of 1:2:4 mix (1
cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size)
and cost of cutting holes and
making good the walls etc. :
04460 MPLCN17001 1.000 EA 278.36 278.36
i) 100 mm diameter
04470 MPLCN17002 1.000 EA 297.78 297.78
ii)150 mm diameter
04480 MPLCN171XX
Providing lead caulked joints to
sand cast iron rain water pipes
and fittings :
04490 MPLCN17101 1.000 EA 407.84 407.84
i) 100 mm diameter
04500 MPLCN17102 1.000 EA 557.75 557.75
ii) 150 mm diameter
04510 MPLCN17200 1.000 EA 414.72 414.72
Providing, fixing and embedding
sand cast iron 150mm shoe for rain
water pipes in the masonry
surrounded with 12 mm thick cement
mortar
of the same mix, as that of masonry
(lead caulking will be paid for
___________________________________________________________________________________
Page 63 of 269
Works Purchase Requisition: 7558376 File Ref. No.: BBSRDO
Date: 10.05.2022
separately)
04520 MPLCN173XX
Providing and fixing on wall face
unplasticised Rigid PVC rain water
pipes conforming to IS:13592 Type A
including jointing with seal ring
conforming to IS : 5382 leaving 10
mm gap for thermal expansion,
Single socketed pipes.
04530 MPLCN17301 1.000 M 194.74 194.74
i) 75 mm diameter
04540 MPLCN17302 1.000 M 295.41 295.41
ii) 110 mm diameter
04550 MPLCN17303 1.000 M 782.87 782.87
iii) 160 mm diameter PVC Rain water
pipe
04560 MPLCN174XX
Providing & fixing on wall face
unplasticised - PVC moulded
fittings/
accessories for unplasticised Rigid
PVC rain water pipes conforming to
IS:13592 Type A including jointing
with seal ring conforming to IS:
5382 leaving 10 mm gap for thermal
expansion.
04570 MPLCN17401 1.000 EA 75.39 75.39
i) 75mm Coupler
04580 MPLCN17402 1.000 EA 114.08 114.08
ii) 110mm Coupler
04590 MPLCN17403 1.000 EA 75.39 75.39
iii) 75 mm Single pushfit Coupler
04600 MPLCN17404 1.000 EA 105.02 105.02
iv) 110 mm Single pushfit Coupler
04610 MPLCN17405 1.000 EA 135.43 135.43
v) Single tee with door of 75x75x75
mm
04620 MPLCN17406 1.000 EA 196.87 196.87
vi) Single tee with door of
110x110x110 mm
04630 MPLCN17407 1.000 EA 118.58 118.58
vii) Single tee without door of
75x75x75 mm
04640 MPLCN17408 1.000 EA 182.60 182.60
viii) Single tee without door
of110x110x110 mm
04650 MPLCN17409 1.000 EA 87.05 87.05
ix) 87.5° Bend of 75 mm
___________________________________________________________________________________
Page 64 of 269
Works Purchase Requisition: 7558376 File Ref. No.: BBSRDO
Date: 10.05.2022
smooth as specified
04740 MPLCN17701 1.000 M2 1,060.60 1,060.60
i) 2mm thk corrugated (2.5"
or4.2"or 6") or step-down (2" or 3"
or 6")
04750 MPLCN17702 1.000 M2 967.77 967.77
ii) 2mm thick flat.
04760 MPLCN17800 1.000 M2 314.15 314.15
Providing & fixing on roof pressed
clay tile (Mangalore tile) of 20 mm
nominal thickness and of approved
size and as per approved pattern on
steel frame work complete (steel
frame work to be paid separately).
04770 MPLCN17900 1.000 M 69.92 69.92
Providing & laying on roof pressed
clay tile ridge (Mangalore tile) of
20mm thickness and of approved
pattern on steel frame work complete
(steel frame work to be paid
separately).
04780 MPLCN180XX
Providing & fixing at all height
FALSE CEILING including providing &
fixing of frame work made of
special sections power pressed from
M.S.
sheets and galvanised with zinc
coating 120gsm/sqm as per IS : 277
and consisting of angle cleats of
size 25mm wide x 1.6mm thick with
flanges of 27mm and 37mm at 1200mm
centre to centre, one flange fixed
to the ceiling with dash fastener
12.5mm dia x 50mm long with 6mm dia
bolts ,other flange of cleat fixed
to the angle hangers of 25x10x0.5mm
of required length, and with nut
and bolts of required size and other
end of angle hanger fixed with
intermediate G.I. channels 45x15x
0.9mm running at the spacing of
1200mm centre to centre to which
the
ceiling section 0.5mm thick bottom
wedge of 80mm with tapered flanges
of 26mm each having clips of 10.5mm
at 450mm centre to centre shall be
___________________________________________________________________________________
Page 66 of 269
Works Purchase Requisition: 7558376 File Ref. No.: BBSRDO
Date: 10.05.2022
chippings,complete as per
specification and direction of
Engineer-in-
charge (Payment for providing
grooves shall be made separately).
05200 MPLCN19900 1.000 M 55.34 55.34
Forming groove of uniform size in
the top layer of washed stone grit
plaster as per approved pattern
using wooden battens, nailed to the
under layer including removal of
wooden battens, repair to the edges
of panels & finishing the groove
complete as per specifications and
direction of the
Engineer-in-charge: 15mm wide and
15 mm deep grooves
05210 MPLCN20000 1.000 M2 125.55 125.55
Extra for washed grit plaster on
exterior walls of height more than
10
m from ground level for every
additional height of 3 m or part
thereof
05220 MPLCN20100 1.000 M 84.01 84.01
Forming groove of uniform size from
12x12mm and upto 25x15mm in
plastered surface as per approved
pattern using wooden battens,
nailed to the under layer including
removal of wooden battens, repairs
to the edges of plaster panel and
finishing the groove complete
as per specifications and direction
of the Engineer-in-Charge.
05230 MPLCN20200 1.000 M2 81.11 81.11
Extra for using white cement in
place of ordinary cement in the
top layer of the item of washed
stone grit plaster.
05240 MPLCN20300 1.000 M2 332.02 332.02
Providing and applying 12 mm thick
(average) premixed formulated one
coat gypsum lightweight plaster
having additives and light weight
aggregates as vermiculite/perlite
respectively conforming to IS:2547
(Part - I and II), applied on
___________________________________________________________________________________
Page 76 of 269
Works Purchase Requisition: 7558376 File Ref. No.: BBSRDO
Date: 10.05.2022
thereof
05340 MPLCN20600 1.000 M2 27.65 27.65
White washing with 3 or more coats
of lime to give an even shade
05350 MPLCN20700 1.000 M2 148.60 148.60
Distempering with oil bound
washable distemper of approved brand
& manufacture to give an even shade
with 2 or more coats
including water thinnable priming
coat with cement primer
05360 MPLCN20800 1.000 M2 84.40 84.40
Distempering with 1st quality
acrylic washable distemper (ready
mixed)
having VOC content less than
50gm/ltr of approved manufacturer,
of required shade and colour
complete as per manufacturer's
specification with 2 or more coats
05370 MPLCN20900 1.000 M2 58.11 58.11
Applying one coat of water
thinnable cement primer of approved
brand and manufacture on wall
surface :
05380 MPLCN21000 1.000 M2 88.37 88.37
Finishing walls with water proofing
cement paint of required shade
with Two or more coats applied @
3.84 kg/10 sqm:
05390 MPLCN21100 1.000 M2 224.67 224.67
Finishing walls with textured
exterior paint of required shade
(2 or more coats applied @ 3.28
ltr/10 sqm, over and including
priming coat of exterior Primer
applied @ 2.20kg/10 sqm)
05400 MPLCN21200 1.000 M2 159.49 159.49
Finishing walls with Acrylic Smooth
exterior paint of required shade
(2 or more coat applied @ 1.67
ltr/10 sqm over & including
priming coat of exterior Primer
applied @ 2.20kg/10 sqm)
05410 MPLCN21300 1.000 M2 137.71 137.71
Finishing walls with Deluxe Multi
surface paint system for
interiors & exteriors using Primer
___________________________________________________________________________________
Page 78 of 269
Works Purchase Requisition: 7558376 File Ref. No.: BBSRDO
Date: 10.05.2022
ii) R.C.C.
05980 MPLCN25800 1.000 KG 25.42 25.42
Dismantling barbed wire or
flexible wire rope in fencing
including making rolls and stacking
within premises.
05990 MPLCN25900 1.000 M2 53.27 53.27
Dismantling expanded metal or
I.R.C. fabrics with necessary
battens and beading including
stacking the serviceable material
within premises.
06000 MPLCN260XX
Dismantling precast concrete or
stone slabs in walls, partition
walls
etc. including stacking within
premises.
06010 MPLCN26001 1.000 M2 201.82 201.82
i) Thickness up to 40 mm
06020 MPLCN26002 1.000 M2 302.38 302.38
ii) Thickness above 40 mm up to 75
mm
06030 MPLCN26100 1.000 M2 40.67 40.67
Dismantling cement asbestos or
other hard board ceiling or
partition
walls including stacking of
serviceable materials and disposal
of
unserviceable materials within
premises.
06040 MPLCN262XX
Dismantling C.I. or asbestos rain
water pipe with fittings and clamps
including stacking the material
within premises.
06050 MPLCN26201 1.000 M 52.29 52.29
i) 75 to 80 mm dia pipe.
06060 MPLCN26202 1.000 M 53.89 53.89
ii) 100 mm dia pipe
06070 MPLCN26203 1.000 M 55.48 55.48
iii) 150 mm dia pipe
06080 MPLCN263XX
Dismantling manually/by mechanical
means including stacking of
serviceable material & disposal of
unserviceable material outside site
___________________________________________________________________________________
Page 86 of 269
Works Purchase Requisition: 7558376 File Ref. No.: BBSRDO
Date: 10.05.2022
site including
all charges etc. complete
06370 MPLCN27700 1.000 M3 162.86 162.86
Dismantling of Concrete Kerb Stones
06380 MPLCN27800 1.000 M3 195.21 195.21
Relaying of dismantled kerb stones
06390 MPLCN27900 1.000 M2 511.80 511.80
Supplying and laying bituminous
carpet of 75mm thick for sand pad
in two layers using Bitumen of
grade VG-10, @100kg/Cum of sand
grit of fineness modulus 3.5max.
Including making slope in the sand
pad including rolling the surface
with Hand roller. Item includes
laying of 1000 micron (1mm) black
LDPE liner as per IS 2508 under the
desired layer of sand
06400 MPLCN28000 1.000 M2 151.80 151.80
Preparation and consolidation of
sub grade with power road roller of
8
to 12 tonne capacity after
excavating earth to an average of
22.5 cm.
depth dressing to camber and
consolidating with road roller
including
making good the undulations etc.
and re-rolling the sub grade and
disposal of surplus earth within
premises
06410 MPLCN281XX
Construction of granular sub-base
by providing close graded material
conforming to specifications,
mixing in a mechanical mixer plant
at
Optimum Moisture Content, carriage
of mixed material by tippers
to work site, for all lead and
lifts, spreading in uniform layers
of
specified thickness with motor
grader on prepared surface &
compacting
with vibratory power roller to
achieve the desired density,
___________________________________________________________________________________
Page 90 of 269
Works Purchase Requisition: 7558376 File Ref. No.: BBSRDO
Date: 10.05.2022
complete
as per specification & direction of
Engineer-in-charge.
06420 MPLCN28101 1.000 M3 2,438.14 2,438.14
i) With material confirming to
grade-I (size 75 mm to .075 mm)
having CBR value - 30, Thickness as
desired
06430 MPLCN28102 1.000 M3 2,553.96 2,553.96
ii) With material confirming to
grade-II (size 53 mm to .075 mm)
having CBR value -25,Thickness as
desired
06440 MPLCN28103 1.000 M3 2,396.40 2,396.40
iii) With material confirming to
grade-III (size 26.5 mm to .075 mm)
having CBR value -20, Thickness as
desired
06450 MPLCN28200 1.000 M3 17.62 17.62
Extra for compaction of earth
work in embankment under optimum
moisture conditions to give at
least 95% of the maximum dry density
(proctor density).
06460 MPLCN28300 1.000 M2 359.11 359.11
Supply and laying of water bound
macadam of 100 mm consolidated
thickness for subbase with 90 to 45
mm stone aggregate,11.2mm size
screenings, chippings of stone and
murrum spreading, watering and
consolidating in camber with power
roller complete as/specifications.
06470 MPLCN28400 1.000 M2 281.52 281.52
Supply and laying of water bound
macadam in layers, each of 75 mm
thick (consolidated) with 63 mm to
45 mm stone aggregate. Each layer
shall be consolidated by power
roller after watering, spreading
chippings of stone and murrum
complete as per specifications.
Item includes supply of murrum 6 mm
thick, watering and rolling with
power roller complete with
preparation of surface. Rate per
Layer
06480 MPLCN28500 1.000 M2 707.13 707.13
___________________________________________________________________________________
Page 91 of 269
Works Purchase Requisition: 7558376 File Ref. No.: BBSRDO
Date: 10.05.2022
and lifts.
07300 MPLCN32500 1.000 M3 220.51 220.51
Preparation of beds for hedging and
shrubbery by excavating 60cm
deep and trenching the excavated
base to a further depth of 30cm,
refilling the excavated earth
after breaking clods and mixing with
sludge or manure in the ratio of
8:1 (8 parts of stacked volume of
earth after reduction by 20% : one
part of stacked volume of sludge
or manure after reduction by 8%),
flooding with water, filling with
earth if necessary, watering and
finally fine dressing, levelling
etc.
including stacking and disposal of
materials declared unserviceable
and surplus earth by spreading and
levelling as directed, within a
lead of 50m lift up to 1.5 m
complete (cost of sludge, manure or
extra earth to be paid for
separately).
07310 MPLCN326XX
Digging holes in ordinary soil and
refilling the same with the
excavated earth mixed with manure
or sludge in the ratio of 2:1 by
volume (2 parts of stacked volume
of earth after reduction by 20% : 1
part of stacked volume of manure
after reduction by 8%) flooding with
water, dressing including removal
of rubbish and surplus earth, if any
with all leads and lifts (cost of
manure, sludge or extra good earth
if needed to be paid for
separately) :
07320 MPLCN32601 1.000 EA 345.76 345.76
i) Holes 1.2 m dia and 1.2 m deep
07330 MPLCN32602 1.000 EA 45.24 45.24
ii) Holes 60 cm dia, and 60 cm deep
07340 MPLCN32700 1.000 EA 1,727.02 1,727.02
Half brick circular tree guard with
common burnt clay F.P.S. (non
modular) bricks of class
___________________________________________________________________________________
Page 107 of 269
Works Purchase Requisition: 7558376 File Ref. No.: BBSRDO
Date: 10.05.2022
cistern
07580 MPLCN33702 1.000 EA 10,238.35 10,238.35
ii) Range of two squatting plates
with 5 litre P.V.C. automatic
flushing cistern
07590 MPLCN338XX
Providing and fixing wash basin
with C.I. brackets, 15 mm C.P. brass
pillar taps, 32 mm C.P. brass waste
of standard pattern, including
painting of fittings and brackets,
cutting and making good the walls
wherever required :
07600 MPLCN33801 1.000 EA 2,756.94 2,756.94
i) White Vitreous China Wash basin
size 550x400 mm with a
pair of 15 mm C.P. brass pillar taps
07610 MPLCN33802 1.000 EA 2,431.12 2,431.12
ii) White Vitreous China Flat back
wash basin size 550x400
mm with single 15 mm C.P. brass
pillar tap
07620 MPLCN33803 1.000 EA 2,275.64 2,275.64
iii) White Vitreous China Angle
back wash basin size 400x400
mm with single 15 mm C.P. brass
pillar tap
07630 MPLCN33900 1.000 EA 3,063.29 3,063.29
Providing and fixing kitchen sink
with C.I. brackets, C.P. brass chain
with rubber plug, 40 mm C.P. brass
waste complete, including painting
the fittings and brackets, cutting
and making good the walls wherever
required - White glazed fire clay
kitchen sink of size 600x450x250mm
07640 MPLCN340XX
Providing and fixing Stainless
Steel A ISI 304 (18/8) kitchen sink
as per IS 13983 with C.I. brackets
and stainless steel plug 40 mm
including painting of fittings and
brackets, cutting and making good
the walls wherever required,
Kitchen Sink with Drain board
07650 MPLCN34001 1.000 EA 4,993.01 4,993.01
i) Sink with drain board 510x1040mm
bowl depth 250mm
___________________________________________________________________________________
Page 112 of 269
Works Purchase Requisition: 7558376 File Ref. No.: BBSRDO
Date: 10.05.2022
the
pipe.
08630 MPLCN37601 1.000 EA 239.97 239.97
i) Total bracket length 580mm of
approved shape and design
(for single 100mm dia pipe)
08640 MPLCN37602 1.000 EA 292.80 292.80
ii) Total bracket length 810mm of
approved shape and design
(for two 100mm dia pipes)
08650 MPLCN37603 1.000 EA 345.43 345.43
iii) Total bracket length 1040mm
of approved shape and
design (for three 100mm dia pipes)
08660 MPLCN377XX
Boring/drilling bore well of
required dia for casing/ strainer
pipe
by suitable method prescribed in
IS: 2800 (part I), including
collecting samples from different
strata, preparing and submitting
strata chart/bore log, including
hire & running charges of all
equipments, tools, plants &
machineries required for the job,
all
complete as per direction of
Engineer-in-charge,
08670 MPLCN37701 1.000 M 310.06 310.06
i) 100mm dia in all types of soil
up to 90m depth below ground
08680 MPLCN37702 1.000 M 340.46 340.46
ii) 150mm dia in all types of soil
up to 90m depth below ground
08690 MPLCN37703 1.000 M 377.46 377.46
iii) 200mm dia in all types of soil
up to 90m depth below ground
08700 MPLCN37704 1.000 M 496.11 496.11
iv) 300mm dia in all types of soil
up to 90m depth below ground
08710 MPLCN37705 1.000 M 542.59 542.59
v) 350mm dia in all types of soil
up to 90m depth below ground
08720 MPLCN37706 1.000 M 694.53 694.53
vi) 400mm dia in all types of soil
up to 90m depth below ground
08730 MPLCN37707 1.000 M 1,036.11 1,036.11
___________________________________________________________________________________
Page 121 of 269
Works Purchase Requisition: 7558376 File Ref. No.: BBSRDO
Date: 10.05.2022
v) PN - 16 Pipe, 40 mm OD (SDR-7.4)
09400 MPLCN39106 1.000 M 618.71 618.71
vi) PN - 10 Pipe, 50 mm OD (SDR-11)
09410 MPLCN392XX
Providing and fixing 3 layer PP-R
(Poly propylene Random copolymer
pipes confirming to IS 15801 UV
stabilized & anti - microbial fusion
welded, having thermal stability
for hot & cold water supply
including all PP - R plain & brass
threaded polypropylene random
fittings, i/c fixing the pipe with
clamps at 1.00 m spacing. This
includes the cost of cutting chases
and making good the same
including testing of joints
complete as/direction of Engg in
Charge.
Concealed work, including cutting
chases and making good the walls
09420 MPLCN39201 1.000 M 350.24 350.24
i) PN - 16 Pipe, 16 mm OD (SDR-7.4)
09430 MPLCN39202 1.000 M 382.37 382.37
ii) PN - 16 Pipe, 20 mm OD (SDR-7.4)
09440 MPLCN39203 1.000 M 438.06 438.06
iii) PN - 16 Pipe, 25 mm OD
(SDR-7.4)
09450 MPLCN39204 1.000 M 495.48 495.48
iv) PN - 16 Pipe, 32 mm OD (SDR-7.4)
09460 MPLCN393XX
Providing and fixing 3 layer PP-R
(Poly propylene Random copolymer)
pipes confirming to IS 15801 UV
stabilized & anti - microbial fusion
welded, having thermal stability
for hot & cold water supply,
including all PP-R plain & brass
threaded polypropylene random
fittings including trenching,
refilling & testing of joints
complete
as per direction of Engineer in
Charge. External Work
09470 MPLCN39301 1.000 M 161.91 161.91
i) PN - 16 Pipe, 16 mm OD (SDR-7.4)
09480 MPLCN39302 1.000 M 181.92 181.92
ii) PN - 16 Pipe, 20 mm OD (SDR-7.4)
___________________________________________________________________________________
Page 128 of 269
Works Purchase Requisition: 7558376 File Ref. No.: BBSRDO
Date: 10.05.2022
09650 MPLCN395XX
Providing and fixing Chlorinated
Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot &
cold water supply including all
CPVC plain & brass threaded
fittings, i/c fixing the pipe with
clamps
at 1.00 m spacing. This includes
jointing of pipes & fittings with
one
step CPVC solvent cement and the
cost of cutting chases and making
good the same including testing of
joints complete as per direction of
Engineer in Charge.Concealed work
including cutting chases and making
good the walls etc.
09660 MPLCN39501 1.000 M 396.71 396.71
i) 15 mm nominal outer dia Pipes
09670 MPLCN39502 1.000 M 463.04 463.04
ii) 20 mm nominal outer dia Pipes
09680 MPLCN39503 1.000 M 544.20 544.20
iii) 25 mm nominal outer dia Pipes
09690 MPLCN39504 1.000 M 657.69 657.69
iv) 32 mm nominal outer dia Pipes
09700 MPLCN396XX
Providing and fixing Chlorinated
Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot &
cold water supply including all
CPVC plain & brass threaded
fittings.This includes jointing of
pipes &
fittings with one step CPVC solvent
cement ,trenching ,refilling &
testing of joints complete as per
direction of Engineer in Charge.
External work
09710 MPLCN39601 1.000 M 196.44 196.44
i) 15 mm nominal outer dia Pipes
09720 MPLCN39602 1.000 M 245.68 245.68
ii) 20 mm nominal outer dia Pipes
09730 MPLCN39603 1.000 M 316.32 316.32
iii) 25 mm nominal outer dia Pipes
09740 MPLCN39604 1.000 M 400.63 400.63
iv) 32 mm nominal outer dia Pipes
09750 MPLCN39605 1.000 M 519.79 519.79
___________________________________________________________________________________
Page 130 of 269
Works Purchase Requisition: 7558376 File Ref. No.: BBSRDO
Date: 10.05.2022
sand)
12 mm thick finished with a
floating coat of neat cement
complete as
per standard design : With Common
burnt clay F.P.S. (non modular)
bricks of class designation 7.5
10720 MPLCN41700 1.000 EA 8,576.82 8,576.82
Constructing masonry Chamber
60x60x75 cm, inside in
brick work in cement mortar 1:4 (1
cement : 4 coarse
sand) for fire hydrants, with C.I.
surface box 350x350 mm. top and
165 mm deep ( inside) with chained
lid and RCC top slab 1:2:4 mix (1
cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal
size) necessary excavation
foundation concrete 1:5:10 (1
cement : 5
fine sand:10 graded stone aggregate
40 mm nominal size) and inside
plastering with cement mortar 1:3
(1 cement : 3 coarse sand) 12 mm
thick finished with a floating coat
of neat cement complete as per
standard design with Common burnt
clay bricks of class designation 7.5
10730 MPLCN418XX
Painting G.I. pipes & fittings with
synthetic enamel white paint over
a ready mixed priming coat, both of
approved quality for new work :
10740 MPLCN41801 1.000 M 14.72 14.72
i) 15 mm diameter pipe
10750 MPLCN41802 1.000 M 17.58 17.58
ii) 20 mm diameter pipe
10760 MPLCN41803 1.000 M 22.95 22.95
iii) 25 mm diameter pipe
10770 MPLCN41804 1.000 M 27.50 27.50
iv) 32 mm diameter pipe
10780 MPLCN41805 1.000 M 32.35 32.35
v) 40 mm diameter pipe
10790 MPLCN41806 1.000 M 38.54 38.54
vi) 50 mm diameter pipe
10800 MPLCN419XX
Painting G.I. pipes and fittings
___________________________________________________________________________________
Page 138 of 269
Works Purchase Requisition: 7558376 File Ref. No.: BBSRDO
Date: 10.05.2022
Pipe
11560 MPLCN43802 1.000 M 2,771.50 2,771.50
ii) 150 mm dia C.I. Double Flanged
Pipe
11570 MPLCN43803 1.000 M 4,366.08 4,366.08
iii) 200 mm dia C.I. Double Flanged
Pipe
11580 MPLCN43804 1.000 M 5,289.40 5,289.40
iv) 250 mm dia C.I. Double Flanged
Pipe
11590 MPLCN43805 1.000 M 6,760.83 6,760.83
v) 300 mm dia C.I. Double Flanged
Pipe
11600 MPLCN439XX
Providing and laying S&S
Centrifugally Cast (Spun) / Ductile
Iron
Pipes conforming to IS : 8329 :
11610 MPLCN43901 1.000 M 1,078.89 1,078.89
i) 100 mm dia Ductile Iron Class
K-7 pipes
11620 MPLCN43902 1.000 M 1,540.28 1,540.28
ii) 150 mm dia Ductile Iron Class
K-7 pipes
11630 MPLCN43903 1.000 M 1,898.94 1,898.94
iii) 200 mm dia Ductile Iron Class
K-7 pipes
11640 MPLCN43904 1.000 M 1,039.58 1,039.58
iv) 100 mm dia Ductile Iron Class
K-9 pipes
11650 MPLCN43905 1.000 M 1,562.12 1,562.12
v) 150 mm dia Ductile Iron Class
K-9 pipes
11660 MPLCN43906 1.000 M 2,141.14 2,141.14
vi) 200 mm dia Ductile Iron Class
K-9 pipes
11670 MPLCN440XX
Providing and laying Double Flanged
(screwed/ welded)
Centrifugally (Spun) Ductile Iron
Pipes of Class K - 9 conforming
to IS : 8329 :
11680 MPLCN44001 1.000 M 1,483.93 1,483.93
i) 100 mm dia Ductile Iron Double
Flanged
11690 MPLCN44002 1.000 M 2,226.16 2,226.16
ii) 150 mm dia Ductile Iron Double
Flanged
___________________________________________________________________________________
Page 144 of 269
Works Purchase Requisition: 7558376 File Ref. No.: BBSRDO
Date: 10.05.2022
13470 MPLCN501XX
Providing and fixing Brass curtain
rod of 1.25mm wall thickness with
two brass brackets fixed with brass
screws & rawl plugs etc.complete
13480 MPLCN50101 1.000 M 283.65 283.65
i) 20mm dia brass curtain rod
13490 MPLCN50102 1.000 M 348.43 348.43
ii) 25mm dia brass curtain rod
13500 MPLCN502XX
Writing name of Retail Outlet and
location/ Indian Oil
Corporation monogram, other sign /
slogans on building /
glass of show window etc. of the
following heights / diameters
with vinyl sticker of approved
quality and shade. 150 micron
thick Non Reflective Vinyl sticker
3M or Equivalent Brand
13510 MPLCN50201 1.000 EA 20.71 20.71
i) Letter of size upto 5 cms
13520 MPLCN50202 1.000 EA 62.12 62.12
ii) Letter of size 6 to 15 cms
13530 MPLCN50203 1.000 EA 103.55 103.55
iii) Letter of size from 16 to 25
cms
13540 MPLCN50204 1.000 EA 621.30 621.30
iv) Letter of size from 26 to 70 cms
13550 MPLCN503XX
Providing and fixing Stainless
steel pipe and fitting of grade
AISI 304
as per JIS standard 3448 complete
with press type fitting( fitting
shall be paid separately) including
fixing of the pipe with clamps at
1.00m spacing including cutting and
making good the walls including
testing of joints complete
as/direction of Engineer in
charge.(pipe
length inserted in the fitting
shall not be measured for payment)
Exposed on walls or concealed in
walls /others
13560 MPLCN50301 1.000 M 314.93 314.93
i) 15.88 mm OD SS pipe
___________________________________________________________________________________
Page 170 of 269
Works Purchase Requisition: 7558376 File Ref. No.: BBSRDO
Date: 10.05.2022
pipe
13840 MPLCN50515 1.000 EA 531.21 531.21
xv) Reducer 48.60 mm x 42.70 mm OD
pipe
13850 MPLCN506XX
Providing and fixing required
Stainless Steel Fitting of press fit
design of grade AISI 304 conforming
to JWWA G116 standard
with V-profile or M profile and
with O-ring sealing gasket of EPDM
material of required dia as per
direction of Engineer-in-charge
Insert Coupling/Socket
13860 MPLCN50601 1.000 EA 60.92 60.92
i) Insert Coupling/Socket for 15.88
mm OD pipe
13870 MPLCN50602 1.000 EA 81.63 81.63
ii) Insert Coupling/Socket for
22.22 mm OD pipe
13880 MPLCN50603 1.000 EA 115.33 115.33
iii) Insert Coupling/Socket for
28.58 mm OD pipe
13890 MPLCN50604 1.000 EA 169.71 169.71
iv) Insert Coupling/Socket for
34.00 mm OD pipe
13900 MPLCN50605 1.000 EA 204.72 204.72
v) Insert Coupling/Socket for 42.70
mm OD pipe
13910 MPLCN50606 1.000 EA 220.27 220.27
vi) Insert Coupling/Socket for
48.60 mm OD pipe
13920 MPLCN507XX
Providing and fixing required
Stainless Steel Fitting of press fit
design of grade AISI 304 conforming
to JWWA G116 standard
with V-profile or M-profile and
with O-ring sealing gasket of EPDM
material of required dia as per
direction of Engineer-in-charge.
90 deg Elbow
13930 MPLCN50701 1.000 EA 75.15 75.15
i) 90 deg Elbow for 15.88mm OD pipe
13940 MPLCN50702 1.000 EA 81.63 81.63
ii) 90 deg Elbow for 22.22 mm OD
pipe
13950 MPLCN50703 1.000 EA 124.39 124.39
___________________________________________________________________________________
Page 173 of 269
Works Purchase Requisition: 7558376 File Ref. No.: BBSRDO
Date: 10.05.2022
mm OD pipe
14230 MPLCN51010 1.000 EA 884.93 884.93
x) Reducing Tee 42.70 mm x 34.00 mm
OD pipe
14240 MPLCN51011 1.000 EA 1,149.24 1,149.24
xi) Reducing Tee 48.60 mm x 15.88
mm OD pipe
14250 MPLCN51012 1.000 EA 1,149.24 1,149.24
xii) Reducing Tee 48.60 mm x 22.22
mm OD pipe
14260 MPLCN51013 1.000 EA 1,149.24 1,149.24
xiii) Reducing Tee 48.60 mm x 28.58
mm OD pipe
14270 MPLCN51014 1.000 EA 1,149.24 1,149.24
xiv) Reducing Tee 48.60 mm x 34.00
mm OD pipe
14280 MPLCN51015 1.000 EA 1,149.24 1,149.24
xv) Reducing Tee 48.60 mm x 42.70
mm OD pipe
14290 MPLCN511XX
Providing and fixing required
Stainless Steel Fitting of press fit
design of grade AISI 304 conforming
to JWWA G116 standard
with V-profile or M-profile and
with O-ring sealing gasket of EPDM
material of required dia as per
direction of Engineer-in-charge.
Male Threaded Tee - Outer dia x
nominal dia
14300 MPLCN51101 1.000 EA 231.93 231.93
i) Male Threaded Tee 15.88 mm OD x
15 mm ND
14310 MPLCN51102 1.000 EA 259.14 259.14
ii) Male Threaded Tee 22.22 mm OD x
15 mm ND
14320 MPLCN51103 1.000 EA 265.63 265.63
iii) Male Threaded Tee 22.22 mm OD
x 20 mm ND
14330 MPLCN51104 1.000 EA 353.70 353.70
iv) Male Threaded Tee 28.58 mm OD x
15 mm ND
14340 MPLCN51105 1.000 EA 353.70 353.70
v) Male Threaded Tee 28.58 mm OD x
20 mm ND
14350 MPLCN51106 1.000 EA 353.70 353.70
vi) Male Threaded Tee 28.58 mm OD x
25 mm ND
___________________________________________________________________________________
Page 176 of 269
Works Purchase Requisition: 7558376 File Ref. No.: BBSRDO
Date: 10.05.2022
Connector/Adopter 28.58 mm OD x 15
mm ND
14780 MPLCN51305 1.000 EA 370.56 370.56
v) Female Threaded
Connector/Adopter 28.58 mm OD x 20
mm ND
14790 MPLCN51306 1.000 EA 436.65 436.65
vi) Female Threaded
Connector/Adopter 28.58 mm OD x 25
mm ND
14800 MPLCN51307 1.000 EA 529.91 529.91
vii) Female Threaded
Connector/Adopter 34.00 mm OD x 25
mm ND
14810 MPLCN51308 1.000 EA 697.05 697.05
viii) Female Threaded
Connector/Adopter 34.00 mm OD x 32
mm ND
14820 MPLCN51309 1.000 EA 746.29 746.29
ix) Female Threaded
Connector/Adopter 42.70 mm OD x 32
mm ND
14830 MPLCN51310 1.000 EA 882.36 882.36
x) Female Threaded
Connector/Adopter 42.70 mm OD x 40
mm ND
14840 MPLCN51311 1.000 EA 1,085.77 1,085.77
xi) Female Threaded
Connector/Adopter 48.60 mm OD x 40
mm ND
14850 MPLCN51312 1.000 EA 1,250.30 1,250.30
xii) Female Threaded
Connector/Adopter 48.60 mm OD x 50
mm ND
14860 MPLCN514XX
Providing and fixing required
Stainless Steel Fitting of press fit
design of grade AISI 304 conforming
to JWWA G116 standard
with V-profile or M-profile and
with O-ring sealing gasket of EPDM
material of required dia as per
direction of Engineer-in-charge.
Male Threaded Connector/Adopter
Outer dia x Nominal dia
14870 MPLCN51401 1.000 EA 250.04 250.04
i) Male Threaded Connector/Adopter
15.88 mm OD x 15 mm ND
___________________________________________________________________________________
Page 180 of 269
Works Purchase Requisition: 7558376 File Ref. No.: BBSRDO
Date: 10.05.2022
OD x 15 mm ND
15010 MPLCN51503 1.000 EA 382.23 382.23
iii) Valve Connector for 22.22 mm
OD x 20 mm ND
15020 MPLCN51504 1.000 EA 549.37 549.37
iv) Valve Connector for 28.58 mm
OD x 25 mm ND
15030 MPLCN51505 1.000 EA 814.95 814.95
v) Valve Connector for 34.00 mm OD
x 32 mm ND
15040 MPLCN51506 1.000 EA 1,133.70 1,133.70
vi) Valve Connector for 42.70 mm
OD x 40 mm ND
15050 MPLCN51507 1.000 EA 1,523.68 1,523.68
vii) Valve Connector for 48.60 mm
OD x 50 mm ND
15060 MPLCN516XX
Providing and fixing required
Stainless Steel Fitting of press fit
design of grade AISI 304 conforming
to JWWA G116 standard
with V-profile or M-profile and
with O-ring sealing gasket of EPDM
material of required dia as per
direction of Engineer-in-charge.
Female Threaded Elbow 90 deg -
Outer dia x Nominal dia
15070 MPLCN51601 1.000 EA 194.35 194.35
i) 90 Deg.Female Thread Elbow 15.88
mm OD x 15 mm ND
15080 MPLCN51602 1.000 EA 247.47 247.47
ii) 90 Deg.Female Thread Elbow
22.22 mm OD x 15 mm ND
15090 MPLCN51603 1.000 EA 247.47 247.47
iii) 90 Deg.Female Thread Elbow
22.22 mm OD x 20 mm ND
15100 MPLCN51604 1.000 EA 265.63 265.63
iv) 90 Deg.Female Thread Elbow
28.58 mm OD x 25 mm ND
15110 MPLCN51605 1.000 EA 371.86 371.86
v) 90 Deg.Female Thread Elbow 34.00
mm OD x 32 mm ND
15120 MPLCN51606 1.000 EA 619.34 619.34
vi) 90 Deg.Female Thread Elbow
42.70 mm OD x 32 mm ND
15130 MPLCN51607 1.000 EA 619.34 619.34
vii) 90 Deg.Female Thread Elbow
42.70 mm OD x 40 mm ND
___________________________________________________________________________________
Page 182 of 269
Works Purchase Requisition: 7558376 File Ref. No.: BBSRDO
Date: 10.05.2022
painting.
16370 MPLMN01609 1.000 EA 822.35 822.35
ix) Supply and welding of forged
butt weld MS equal tees,
of 50mm NB including doping/
painting.
16380 MPLMN01610 1.000 EA 687.73 687.73
x) Supply and welding of forged
butt weld MS equal tees,
of 40mm NB including doping/
painting.
16390 MPLMN017XX
Supply and welding of forged butt
weld MS Reducers of following sizes
16400 MPLMN01701 1.000 EA 1,950.44 1,950.44
i) Supply & welding of forged butt
weld MS Reducers of size 200x100mm
including doping/ painting.
16410 MPLMN01702 1.000 EA 1,415.31 1,415.31
ii) Supply & welding of forged butt
weld MS Reducers of size150x100mm
including doping/ painting.
16420 MPLMN01703 1.000 EA 1,080.72 1,080.72
iii) Supply & welding of forged
butt weld MS Reducers of
size100x80mm
including doping/ painting.
16430 MPLMN01704 1.000 EA 846.40 846.40
iv) Supply & welding of forged butt
weld MS Reducers of size 80x50mm
including doping/ painting.
16440 MPLMN01705 1.000 EA 675.12 675.12
v) Supply & welding of forged butt
weld MS Reducers of size 50x40mm
including doping/ painting.
16450 MPLMN018XX
Supply & welding slip-on flanges
conforming to IS2062 GrA, ANSI
B16.5,
Class#150 with 3 runs of weld
outside and one run of weld inside
the
flanges as per specifications and
standard Drg.enclosed herein
16460 MPLMN01801 1.000 EA 1,056.43 1,056.43
i) S/W Slipon flanges of 100 mm dia.
conforming to IS2062 GrA, ANSI
B16.5,Class 150 as per
___________________________________________________________________________________
Page 197 of 269
Works Purchase Requisition: 7558376 File Ref. No.: BBSRDO
Date: 10.05.2022
mm
16660 MPLMN02203 1.000 EA 203.18 203.18
iii) S/I of Threaded Bush of 50 x
40 mm
16670 MPLMN023XX
Supplying and installation of the
following threaded Coupling
conforming to detailed specification
16680 MPLMN02301 1.000 EA 364.81 364.81
i) S/I of Threaded Coupling of 80
mm dia
16690 MPLMN02302 1.000 EA 257.06 257.06
ii) S/I of Threaded Coupling of 50
mm dia
16700 MPLMN02303 1.000 EA 202.63 202.63
iii) S/I of Threaded Coupling of
40mm dia
16710 MPLMN024XX
Supplying and installation of the
following threaded Nipple
conforming to detailed specification
16720 MPLMN02401 1.000 EA 378.28 378.28
i) S/I of Threaded Nipple of 80 mm
dia
16730 MPLMN02402 1.000 EA 285.82 285.82
ii) S/I of Threaded Nipple of 50 mm
dia
16740 MPLMN02403 1.000 EA 228.74 228.74
iii) S/I of Threaded Nipple of 40
mm dia
16750 MPLMN025XX
Supplying and installation of the
following threaded Union
conforming to detailed specification
16760 MPLMN02501 1.000 EA 871.57 871.57
i) S/I of Threaded Union of 80 mm
16770 MPLMN02502 1.000 EA 448.63 448.63
ii) S/I of Threaded Union of 50 mm
16780 MPLMN02503 1.000 EA 371.85 371.85
S/I of Threaded Union of 40 mm for
Dispensing Pump
16790 MPLMN026XX
Supplying and installation of the
following threaded
16800 MPLMN02601 1.000 EA 925.06 925.06
i) 80 mm dia Aluminium camlock
coupling - Male only
16810 MPLMN02602 1.000 EA 1,642.84 1,642.84
___________________________________________________________________________________
Page 200 of 269
Works Purchase Requisition: 7558376 File Ref. No.: BBSRDO
Date: 10.05.2022
of 50 mm dia.
17010 MPLMN03202 1.000 EA 1,062.18 1,062.18
ii) S/I Screwed type GM Gate Valve
of 40 mm dia.
17020 MPLMN033XX
Supply and installation of screwed
type gun metal valves as per IOC
specifications: Horizontal Check
Valve
17030 MPLMN03301 1.000 EA 1,520.15 1,520.15
i) S/I Screwed type GM Horizontal
Check Valve of 50 mm dia
17040 MPLMN03302 1.000 EA 1,169.94 1,169.94
ii) S/I Screwed type GM Horizontal
Check Valve of 40 mm dia
17050 MPLMN034XX
Supply and installation of screwed
type gun metal valves as per IOC
specifications: Vertical Check Valve
17060 MPLMN03401 1.000 EA 1,627.90 1,627.90
i) S/I Screwed type GM Vertical
Check Valve of 50 mm dia
17070 MPLMN03402 1.000 EA 1,358.51 1,358.51
ii) S/I Screwed type GM Vertical
Check Valve of 40 mm dia
17080 MPLMN035XX
Supply and installation of screwed
type gun metal valves as per IOC
specifications: Angular Check Valve
17090 MPLMN03501 1.000 EA 3,139.21 3,139.21
i) S/I Screwed type GM Angular
Check Valve of 50 mm dia
17100 MPLMN03502 1.000 EA 2,215.86 2,215.86
ii) S/I Screwed type GM Angular
Check Valve of 40 mm dia
17110 MPLMN036XX
Supply and installation of screwed
type gun metal valves as per IOC
specifications: Ball Valve
17120 MPLMN03601 1.000 EA 15,320.50 15,320.50
i) S/I Screwed type GM Ball Valve
of 100 mm dia
17130 MPLMN03602 1.000 EA 8,897.48 8,897.48
ii) S/I Screwed type GM Ball Valve
of 80 mm dia
17140 MPLMN03603 1.000 EA 3,619.05 3,619.05
iii) S/I Screwed type GM Ball Valve
of 50 mm dia
___________________________________________________________________________________
Page 203 of 269
Works Purchase Requisition: 7558376 File Ref. No.: BBSRDO
Date: 10.05.2022
with 9 terminals
19930 MPLEN017XX
Providing, fixing, testing and
commissioning of FLP junction box
of
approved make for cable connection/
jointing.
19940 MPLEN01701 1.000 EA 1,610.59 1,610.59
i) For cables 2.5 to 4 sqmm XLPE /
AYFY
19950 MPLEN01702 1.000 EA 1,859.77 1,859.77
ii) For cables 6 sqmmXLPE / AYFY
19960 MPLEN01703 1.000 EA 3,637.77 3,637.77
iii) For cables of 25 sqmm XLPE /
AYFY
19970 MPLEN01800 1.000 EA 2,258.10 2,258.10
Supplying and providing 100mm
square hensel weather proof
junction box for emblem pole/ light
pole/yard light
19980 MPLEN01900 1.000 EA 103.82 103.82
Supply & laying of CAT 6 network
cable of approved make
19990 MPLEN02000 1.000 EA 8,418.87 8,418.87
Cable dressing and tagging of
cables in installed Main Electrical
Panel
and Distribution Boards for Panel
board codes MPLEN03302 and
MPLEN03303
The work includes disconnection of
all cables from panel side,
removing all cabes upto entry to
the panel room, relaying the cables
through cable tray, or cable trench
or electrical conduit and
termination of cables with proper
size cable glands in panel side
after tagging with cable tags for
identification. Payment for cable
tray, conduit, any civil works,
cable glands to be paid seperately.
20000 MPLEN02100 1.000 EA 5,261.79 5,261.79
Cable dressing and tagging of
cables in installed Main Electrical
Panel
and Distribution Boards for Panel
board code MPLEN03301. The work
___________________________________________________________________________________
Page 229 of 269
Works Purchase Requisition: 7558376 File Ref. No.: BBSRDO
Date: 10.05.2022
21190 MPLEN048XX
Supply and fixing 4-pole MCCB of
breaking capacity 16 KA in
existing panel board.
21200 MPLEN04801 1.000 EA 4,374.61 4,374.61
i) 32Amp
21210 MPLEN04802 1.000 EA 4,374.61 4,374.61
ii) 63 Amp
21220 MPLEN04803 1.000 EA 4,374.61 4,374.61
iii) 100Amp
21230 MPLEN049XX
Supply and fixing 4-pole MCCB of
breaking capacity 16 KA in sheet
steel enclosure.
21240 MPLEN04901 1.000 EA 5,814.09 5,814.09
i) 32Amp
21250 MPLEN04902 1.000 EA 5,814.09 5,814.09
ii) 63 Amp
21260 MPLEN04903 1.000 EA 5,814.09 5,814.09
iii) 100Amp
21270 MPLEN050XX
Supply and fixing of TPN, switch
disconnector fuse unit
(Panel mounted type) with ISI
marked HRC fuses
21280 MPLEN05001 1.000 EA 2,410.26 2,410.26
i) 32Amp
21290 MPLEN05002 1.000 EA 3,198.52 3,198.52
ii) 63Amp
21300 MPLEN05003 1.000 EA 7,010.18 7,010.18
iii) 125Amp
21310 MPLEN051XX
SWITCH FUSE UNIT WITHOUT FUSE
Supply & fixing
switches/accessories in sheet metal
enclosure
including providing of required
connections with supply of necessary
cable/conduits as required in case
of existing control switch panel/
switch board etc. all complete as
per specification and direction of
Engineer-In-Charge.( SFUs shall be
of approved make and SFUs
shall be without fuse)
21320 MPLEN05101 1.000 EA 643.35 643.35
i) 16Amp SPN switch fuse unit
21330 MPLEN05102 1.000 EA 1,186.75 1,186.75
___________________________________________________________________________________
Page 246 of 269
Works Purchase Requisition: 7558376 File Ref. No.: BBSRDO
Date: 10.05.2022
(Contactor Make:
LS/Siemens/ABB).
21780 MPLEN06100 1.000 EA 2,290.24 2,290.24
Supply and Installation of Flame
Proof ESD Push Button
21790 MPLEN062XX
GENERATORS
Supply and installation, testing
and commissioning of air
cooled Diesel Generator in Acoustic
Enclosure with all necessary
accessories including Control
panel, residential silencer, exhaust
line, fuel line, anti vibration
mounting pads,diesel tank, electric
starter with battery and seperate
battery charger etc in an
aquostic enclosure (70 db +/ -5
from 3 m distance) as
required complete.
21800 MPLEN06201 1.000 EA 251,569.67 251,569.67
i) 7.5KVA
21810 MPLEN06202 1.000 EA 278,428.39 278,428.39
ii) 10KVA
21820 MPLEN06203 1.000 EA 300,415.10 300,415.10
iii) 15KVA
21830 MPLEN06204 1.000 EA 348,314.72 348,314.72
iv) 20KVA
21840 MPLEN06205 1.000 EA 365,366.97 365,366.97
v) 25KVA
21850 MPLEN06206 1.000 EA 435,490.85 435,490.85
vi) 35KVA
21860 MPLEN06207 1.000 EA 562,580.17 562,580.17
vii) 50KVA
21870 MPLEN063XX
Erection, testing and commissioning
of IOC supplied following
3-phase Air cooled Generator
(excluding the cost of cable,
glands and earthing)
21880 MPLEN06301 1.000 EA 9,350.51 9,350.51
i) 7.5KVA
21890 MPLEN06302 1.000 EA 11,728.87 11,728.87
ii) 10KVA
21900 MPLEN06303 1.000 EA 13,633.86 13,633.86
iii) 15KVA
21910 MPLEN06304 1.000 EA 15,538.86 15,538.86
iv) 20KVA
___________________________________________________________________________________
Page 251 of 269
Works Purchase Requisition: 7558376 File Ref. No.: BBSRDO
Date: 10.05.2022
dia on pole,
as per specifications and direction
of Engineer in charge
22400 MPLEN07502 1.000 EA 1,806.84 1,806.84
ii) S/E Arm " Y " bracket 38/50mm
dia on pole,
as per specifications and direction
of Engineer in charge
22410 MPLEN076XX
Supplying & drawing inside the
poles 3 core 2.5 sq.mm PVC insulated
flexible copper conductor, fixing
of junction box at the pole base
(excluding supply of JB), making
all connections on both ends, all
complete as per specification and
direction of Engineer In-charge.
22420 MPLEN07601 1.000 EA 1,130.30 1,130.30
i) "Y" Pole
22430 MPLEN07602 1.000 EA 1,130.30 1,130.30
ii) "L" Pole
22440 MPLEN077XX
OCTAGONAL POLES
Supply & Fixing of Octagonal Poles
of following type (Civil job shall
be paid separatly) :
22450 MPLEN07701 1.000 EA 11,604.91 11,604.91
i) S/E of 7 Meter high galvanised
Octagonal pole with top 70mm (A/F),
bottom 130mm (A/F) made up of 3 mm
thick plate having a base
plate of size 220 x 220 x 12 with
single arm 1500mm long bracket
arm made up of 48 O.D. pipe with EN
8 grade galvanised foundation
bolts and anchor plate on suitable
concrete foundation as per
standard drawings enclosed
herein(Civil & Electrical works
shall be paid separately) having
fixing arrangement for mounting
2 Nos. of 250W Metal halide
luminaries (on opposite sides)
22460 MPLEN07702 1.000 EA 16,407.24 16,407.24
ii) S/E of 9 Meter high galvanised
Octagonal pole with top 90mm(A/F),
bottom 158mm (A/F), made up of 3mm
thick plate having a base
___________________________________________________________________________________
Page 256 of 269
Works Purchase Requisition: 7558376 File Ref. No.: BBSRDO
Date: 10.05.2022
HP HP
23220 MPLEN09600 1.000 EA 1,940.97 1,940.97
Dismantling of light poles
23230 MPLEN09700 1.000 EA 2,104.71 2,104.71
Phase wise measuring the electrical
load, calculation of equipment
wise load for balanced distribution
in 3 phases. Disconnection &
reconnecting cables in the feeder
for balanced distribution of load in
all 3phases,submission of report of
final distributed electrical load.
23240 MPLEN09800 1.000 EA 3,367.55 3,367.55
Repair of CVT (Single phase, air
cooled constant voltage transformer
having input voltage range of
180-260V and output voltage of
220/230V
Rating 500 VA) with all accessories
and parts including capacitor,
coil rewinding, internal wiring etc
complete.
23250 MPLEN09900 1.000 EA 5,261.79 5,261.79
Repair of Stabilizer (Rating of 5
kVA) with all accessories and
parts including transformer, motor,
internal circuits, switches,
voltmeter etc complete.
23260 MPLEN10000 1.000 M2 183.88 183.88
Painting of Electrical Equipment -
Cleaning of surface, rust removing
of foreign matter, rubbing down
thoroughly with emery paper, wire
brush, washing with degreasing
solvent (white spirit) to remove
grease etc. and preparation of
surface for application of paint by
spray painting on electrical
equipment / structures/ poles or any
other metallic surface with two
coats of Approved brand &
manufacturer of Aluminium paint
including supply of paint suitable
for a temperature of 100 Degree
Celsius. All complete with labour
and materials as per directions of
the Engineer-in-Charge.
23270 MPLEN10100 1.000 LS 2,755.29 2,755.29
___________________________________________________________________________________
Page 268 of 269
Works Purchase Requisition: 7558376 File Ref. No.: BBSRDO
Date: 10.05.2022
___________________________________________________________________________________
TOTAL ESTIMATE VALUE: Rs. 20,146,870.35
( Rs.TWO CRORE ONE LAC FORTY-SIX THOUSAND EIGHT HUNDRED SEVENTY & PAISE
THIRTY-FIVE )
___________________________________________________________________________________
Page 269 of 269