Professional Documents
Culture Documents
Display:
Remote:
Step 1: Start the machine by plugging the power supply. User will have the display as shown
below:
Step 2: Click on the Select button. User will have the display as shown below.
Step 3: Click on UP & Down Buttons to select the model, either ‘Validate’ or ‘Test’. Display for
both the models will be as shown below:
Step 4: Now click on OK Button to go for the model selection. Display will be as shown below:
Step 5: Now click on the Process Start Button to start the selected model process. After the
process started the running display will be as shown below.
Step 6: When the process is completed user will have the display as shown below.
In this display the Model Validate is showing that Validate Model was processed and Total:2
is showing that 2 Validate models has been processed.