This document describes an experiment involving the manipulation of glass tubing. The report sheet involves cutting glass tubing, bending it at 90 and 30 degree angles, and drawing out tubes. The questions ask about using a triangular file, making a medicine dropper from glass tubing, and why to fire-polish the edge of a cut glass tube.
This document describes an experiment involving the manipulation of glass tubing. The report sheet involves cutting glass tubing, bending it at 90 and 30 degree angles, and drawing out tubes. The questions ask about using a triangular file, making a medicine dropper from glass tubing, and why to fire-polish the edge of a cut glass tube.
This document describes an experiment involving the manipulation of glass tubing. The report sheet involves cutting glass tubing, bending it at 90 and 30 degree angles, and drawing out tubes. The questions ask about using a triangular file, making a medicine dropper from glass tubing, and why to fire-polish the edge of a cut glass tube.
2. Bending glass tubing a.) 90deg.________________________________________________ b.) 30 deg._______________________________________________ 3. Drawing out tubes ________________________________________________________
Questions:
1. What is the use of sharp triangular file in the laboratory?
______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ 2. If you are asked to make a medicine dropper from a glass tubing, will you do it? ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ 3. Why should you fire-polished the edge of a cut glass tubing? ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________