Professional Documents
Culture Documents
Part 5:JSA Review Process. After the job has been completed, JSA leader should note: any hazards, which were identified in the original JSA? In
case of any new hazard indentified by any of the working team member during the job, JSA review process should be carried on.
JSA No: JOB TITLE: Installation of corrugated sheets & Hard Barrication
Step Describe Job Step Potential Hazards Hazard Controls
1 Hard Barricading (for area Work without obtaining Permit Obtain relevant permit before
preparation) Manual handling commencing work
Work in live area Careful handling of materials
Slip, trip & fall Ensure use of appropriate PPE’s
Ensure close safety supervision of all
work
Avoid scattered materials at site
Keep access clear from obstruction
Do the only described job as
mentioned in permit
2 Installation of corrugated sheets Mishandling Careful handling of materials
Sharp edges Ensure Use of hand gloves (PPE’s)
Hand injury Stack the sheets properly
Live equipments/lines Avoid throwing of materials
Slip , trip & fall Avoid mishandling with live
equipments/lines/valves
Maintain good housekeeping at site
Place a weight/block on stacked
sheets to avoid scattering
3 Working in Live areas Vehicles/equipments striking/hit with Obtain relevant permit before commencing
Structure/live lines of any work
Work in live area Ensure vehicles/equipment movement only
Unaware about hazards of live areas on designated/defined routes
Traffic movement on authorized routes Be highly careful while crossing over the
at plan site culverts/drains
Damaged to underground utilities Avoid sharp turnings of vehicles
JSA No: JOB TITLE: Installation of corrugated sheets & Hard Barrication
Step Describe Job Step Potential Hazards Hazard Controls
(Drains, Culverts, electrical cable ,pipe Banks man should be at site while
lines etc) movement of vehicles/equipments
Ensure use of appropriate PPE’s
Ensure close safety supervision of all work
Deliver TBT & awareness to all of
workforce about area/activity hazards
Mishandling with live Do not mishandle or operate any of live
instruments/valves equipment/valve in the area
Movement of people in unauthorized Unauthorized movement of workers to be
areas restricted in live areas
Fumes of Hydrocarbons in live areas Gas test to be performed in live areas
Flammable ,toxic gases Remove any of combustible material from
Fire/explosion site
Slip , trip & fall Don’t switch off engine once started to
avoid sparking from battery terminals
Maintain good housekeeping at site
Don not left any vehicle/equipment/tool un
attendant in running condition