6 Working in Live areas Vehicles/equipments striking/hit with Obtain relevant permit before Structure/live lines commencing of any work Work in live area Ensure vehicles/equipment movement Unaware about hazards of live areas only on designated/defined routes Traffic movement on authorized routes Be highly careful while crossing over the at plan site culverts/drains Damaged to underground utilities Avoid sharp turnings of vehicles (Drains, Culverts, electrical cable ,pipe Banks man should be at site while lines etc) movement of vehicles/equipments Ensure use of appropriate PPE’s Ensure close safety supervision of all work Deliver TBT & awareness to all of workforce about area/activity hazards Mishandling with live Do not mishandle or operate any of live instruments/valves equipment/valve in the area Movement of people in unauthorized Unauthorized movement of workers to be areas restricted in live areas Fumes of Hydrocarbons in live areas Gas test to be performed in live areas Flammable ,toxic gases Remove any of combustible material from Fire/explosion site Slip , trip & fall Don’t switch off engine once started to avoid sparking from battery terminals Maintain good housekeeping at site Don not left any vehicle/equipment/tool un attendant in running condition