Professional Documents
Culture Documents
V100R016C10
Technical Specifications
Issue 02
Date 2021-02-28
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees
or representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Website: https://www.huawei.com
Email: support@huawei.com
Contents
Product Versions
The following table lists the base station product versions related to the RRU.
Intended Audience
This document is intended for:
● Network planners
● Onsite engineers
● System engineers
Organization
02 (2021-02-28)
This is the second commercial release.
Compared with Issue 01 (2020-04-07), this issue does not include any new topics.
Compared with Issue 01 (2020-04-07), this issue includes the following changes.
Compared with Issue 01 (2020-04-07), this issue does not exclude any topics.
01 (2020-04-07)
This is the first commercial release.
Compared with Draft A (2020-01-20), this issue does not include any new topics
or changes, or exclude any topics.
Draft A (2020-01-20)
This is a draft.
a: ATBR in the TX/RX Mode column indicates that the RF module uses A
transmit channels and B receive channels.
b: The number of carriers in the Capacity column refers to the maximum
number of carriers that can be configured for the module in single-mode
scenarios, not the number of carriers that can be configured for a single
channel. For details about the channel-level carrier configurations for the
module working in a single mode, see Output Power Configuration in the
following table. When the module is used with a feature, see the feature
specification informations in the corresponding feature parameter description to
learn the module-level or channel-level supported carrier configurations after
the feature is enabled.
Table 3-3 Output power and carrier configurations of an RRU3278u (3500 MHz)
a: AxC W in the Maximum Output Power column indicates that the number of
TX channels of the RF module is A and the maximum output power of each TX
channel is C W.
NOTE
Receiver Sensitivity
NOTE
The LTE TDD receiver sensitivity, as recommended in 3GPP TS 36.141, is measured under a
5 MHz bandwidth based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs) standard.
RF Compliance Standards
Item Standard
Input Power
NOTE
DC RRUs can use external power modules to support AC scenarios. For details about the
types of external power modules supported by each type of RRU, see section "RRU Auxiliary
Devices" in the corresponding RRU hardware description. For details about the external
power modules, see user guides of the corresponding models.
Table 3-8 Power consumption of the DBS (-48 V DC) (configured with the
RRU3278u 3500 MHz)
a: For an LTE base station, one UMPTb2 and one UBBPd9 are configured in the
BBU when one carrier is used, one UMPTb2 and two UBBPd9 boards are
configured when two carriers are used, and one UMPTb2 and two UBBPd9
boards are configured when three carriers are used.
b: "AxB MHz, C carriers" is used for LTE, indicating that A cells are configured,
the bandwidth of each cell is B MHz, and there are C carriers in total. Unless
otherwise specified, this document assumes that one sector is configured with
one RF module.
c: The typical power consumption of LTE is measured when the ambient
temperature is 25°C (77°F) and the traffic load reaches 50%. The actual power
consumption has a 10% deviation from this value.
d: The maximum power consumption of LTE is measured when the ambient
temperature is 25°C (77°F) and the traffic load reaches 100%. The actual power
consumption has a 10% deviation from this value.
Environmental Specifications
NOTE
The output power of an RRU temporarily decreases when it operates at temperature ranges
10ºC (18ºF) less than or equal to its maximum rated value. This is dependent on
installation scenario, traffic load, and carrier configuration.
NOTE
● Unless otherwise specified, the lightning protection specifications depend on the surge
waveform of 8/20 μs.
● Unless otherwise specified as maximum discharge current, all the surge current items refer
to nominal discharge current.
Item Specifications
a: The validity period is one year. The product can function properly within the
validity period if the storage environment meets the preceding standards.
Table 3-12 CPRI port protocol and rate of an RRU3278u (3500 MHz)
2 CPRI 4.9/9.8
The maximum level of cascading between an RRU and a BBU depends on the
cascading capability of the RRU working in different RATs and the bandwidth
resources of the CPRI ports on the BBU side. The following table lists the
maximum levels of cascading and maximum distance between an RRU and a BBU
when the RRU works in a single mode.
NOTE
● For details about the CPRI topologies supported by each RRU model, see RF Unit and
Topology Management.
● For details about the ALD capabilities supported by each RRU model (for example, the
capabilities of RF ports supporting RET antennas and TMAs), see ALD Management.
General Rules
● For an nT RF module (n is 2, 4, or 8), the restriction is as follows: