Professional Documents
Culture Documents
Create/Load
2
2-1
AP100G CAM Operation Guide I NCT
2.1 Create New Sheet
[File]-[New] 2
AP100G CAM Operation Guide I NCT
Creates a new sheet by specifying the process step conditions for sheet Create/Load
(such as process method, machine, and material). Sheet
2-2
# Program number
Displays a tentative name. When saving an NC program, enter any
name.
# Machine Type 2
AP100G CAM Operation Guide I NCT
2-3
Compound Process
! LIBRA and VL cannot be used for compound process.
Note
! Punching and Laser tabs will appear when compound process is selected.
2
AP100G CAM Operation Guide I NCT
Setup each setting on each screen. For setting up laser, please refer Create/Load
[AP100G Operation Guide II (Laser)] Sheet
! The mode will be Punching when [OK] button is selected on Punching
tab. To change mode to laser, select [File]-[Change mode]
# Material
Material name, material type and thickness. You can change material
or enter a new material.
To change material, select [Name] if its name is entered. Select [Code]
if a material code is also entered. To enter a new material, select
[Name].
- Name (name input mode)
To change material, click the right [List] button, and then select a
new material from the list. To enter a new material, enter its material
name (combination of uppercase letters and numeric characters,
hyphen, and period). Click [OK], and the [New Material Name
Registration] dialog box appear. Input information of each item, and
then click [OK].
- Name (input mode for material type/ sheet thickness)
Use Name to select a material name that already exists on the
material manager by pull down from the material type/ sheet
thickness. (You can only select the materials that are registered on
the material manager)
When the material type that does not exist is entered, click the
Process Setup [OK], and the [New Material Name Registration]
dialog box will appear. Input information of each item, and then click
[OK].
2-4
- Code
If you have sheet size set in Material manager, you can select sheet
from this option. Click [List] button for selection from the list. The
list for [Name] appears. You can, however, select a material name by 2
AP100G CAM Operation Guide I NCT
2-5
Settings in the [New Material Name Registration] dialog box
2
AP100G CAM Operation Guide I NCT
Create/Load
Sheet
# Material String
(In name input mode)
The material name specified in the [Processing Setup Condition]
dialog box appears.
(In input mode for material type/ sheet thickness)
From the material type/ sheet thickness specified in the [Processing
setup Condition] dialog box, the material name is automatically
generated and displayed.
# Material Type
(In name input mode)
Select a material name from the list.
(In input mode for material type/ sheet thickness)
The material type specified in the [Processing Setup Condition] dialog
box appears.
# Thickness
(In name input mode)
Enter material thickness (Inch).
(In input mode for material type/ sheet thickness)
The sheet thickness specified in the [Processing Setup Condition]
dialog box appears.
# Clearance
Enter the clearance between punch and die for Punching.
2-6
# Bending-material setting
Click [Browse], and then select a material name from the list. This is
used in CAD to calculate Bend attributes.
# Comment
2
AP100G CAM Operation Guide I NCT
2-7
2.2 Open Existing Sheet
[File]-[Open]-[Program] 2
AP100G CAM Operation Guide I NCT
Use existing sheet and generate NC program. There are two ways of Create/Load
operation based on processes. Sheet
Caution PLS data of an old version may be called with NC + graphic data in
order to convert to current version of PLS data.
1. Click [File], [Open], and [Program].
Operation
2. In the [Open program] dialog box, select the data from the list
or enter the part number then click [Open].
3. If necessary, change each item in the [Processing Setup
Conditions] dialog box, and click [OK].
For compound process
For a compound process, the NC programs of the punching and laser are
opend as linked process. You can select whether to load only one NC
Note
program or both NC programs. However, you cannot load the NC
program of a combination machine (APELIO) to compound process.
1. Click [File], [Open], and [Program].
Operation 2. In the [Open program] dialog box, select the data from the list
or enter the part number then click [Open].
3. Click [Open].
4. Select [Compound Process] from [Machine type] in the [Process
Setup Condition] dialog box.
2-8
● If the compound process flag of the selected NC program is ON, [Compound
Tips Process] will be selected when it is loaded.
6. A message appears. To load both punch and laser NC, click [Yes]
button. Click [No] button to cancel loading. Create/Load
Sheet
● You can neither load punch-processed parts to the laser process, nor
Tips
laser-processed parts to the punch process.
2-9
Settings in the [Open Programs] dialog box
2
AP100G CAM Operation Guide I NCT
Create/Load
Sheet
# Server/Folder
Display server and folder name selected
# Control Code
Select Processing method to filter data list (NCT/LASER/APELIO)
# Program Name (Required)
Input program name to save. When the same name is used in same
folder, the data will be over written
# Program Comment
Input comment
2-10
2.3 Change /Confirm Process Setup
[File]-[Process Setup]
2
AP100G CAM Operation Guide I NCT
2-11
2.4 Close Sheet
[File]-[Close]
2
AP100G CAM Operation Guide I NCT
1. Select the sheet that you want to close. (Click the of the sheet.)
Operation
Note A message appears if the turret load is not updated after the tools are
registered or changed. To update the Turret load, click [Tool Layout]
button and then click [Register Tool Layout] button in the [Tooling]
dialog box.
2-12
2.5 Close All Sheet
[File]-[Close All].
2
AP100G
AP100G CAM
A message appears if the turret load is not updated after the tools are
Note registered or changed. To update the Turret load, click [Tool Layout]
button and then click [Register Tool Layout] button in the [Tooling]
Guide NCTⅢ
dialog box.
I NCT
2-13