Professional Documents
Culture Documents
6-1
AP100G CAM Operation Guide I NCT
6.1 Change Turret Load
[Tooling]-[Turret Load] 6
AP100G CAM Operation Guide I NCT
Caution # You cannot change any tools that are already used.
● When you select a tool, it is replaced with a tool you specify below.
Tips
6-2
Remove a tool from a turret
Remove a tool from a turret
Caution
# You cannot remove any tools that are already used (displayed in 6
AP100G CAM Operation Guide I NCT
red).
Change
Operation 1. Click [Tooling] and [Tooling Layout]. Turret Load
⇒ Refer [Setting items in “Turret Load”])
(⇒
5. Click [Close].
6-3
4. Select the station to move tool to.
Caution ● You cannot move a tool to a place with a different key spec.
6
● The tool that is selected to move tool to will automatically be moved to
AP100G CAM Operation Guide I NCT
5. Click [Close].
6-4
Auto tool load to the turret
Automatically load used tool on the sheet to empty stations in the turret 6
AP100G CAM Operation Guide I NCT
from outside the turret. (Or, replaces tool with a tool unused in the same
station size or key spec.) Change
1. Click [Turret] and [Turret Load]. Turret Load
Operation
⇒ Refer [Setting items in “Turret Load”])
(⇒
2. Click the [Auto Setup] button in the [Turret Load] dialog box.
● The tool replaced is moved to the list of [Outside Turret].
● When [Previous T Number] is displayed, load tools to the previous T number.
Tips
When the target station is locked or used tool is in already, load tools to
another station.
6-5
How to read the [Turret Load] dialog box
Change
Turret Load
6-6
! T number
Type in station number to move cursor on the list. When the
[Enter] key is hit after typing in the station number, tool setup
dialog box for that station appears. 6
AP100G CAM Operation Guide I NCT
! [Setup]
Change
Setup tool information for specified station.
Turret Load
! [Delete]
Remove tool from turret.
! [Move]
Move tool from one station to the other.
! [Change Current]
Set selected tool as current tool.
! [Print Turret]
Print out graphic view of turret except for LIBRA205/LIBRA206
/MERC722.
# [Tooling Layout Auto Setup]
Load tools from outside turret to turret automatically. It looks for
empty station with same size and key spec to load tools.
# [Outside Turret]
List of tools picked from inventory by Auto Assignment or [Add
Available Tool] manually.
! [Add Available Tool]
Add tool from inventory to [Outside Turret].
! [Setup]
Change tool.
! [Delete]
Remove tool from Outside Turret.
! [Change Current]
Set selected tool as current tool.
6-7
Turret Diagram display
This is not available for LIBRA/ MERC/ Non-Amada machine.
6
AP100G CAM Operation Guide I NCT
Change
Turret Load
#
Rotate turret.
6-8
Settings in the [Change Tool Information] dialog box
(NCT/Combination)
6
AP100G CAM Operation Guide I NCT
Change
Turret Load
Tips
Items are different depend on shape.
# T number
Station number
# Shape
Tool shape.
# Management Name
Punch name for control. Click [Browse], and then select a name from
the [Tools] dialog box. (Tool list from your inventory)
For special, forming and triangular tools, [Graphics>>] button shows
up. You can change display of special shape tools.
# Size
Enter the X, Y, and R size of the tool.
# Angle
Enter an angle to set a tool on the turret.
6-9
# Type
Shape sub code. You can specify the shape sub codes below.
$ RE/OB/RR:
Normal, nesting (shearing tool) and slotting for VIPROS 6
$ Special/forming/marking:
AP100G CAM Operation Guide I NCT
Change
Not keyed, keyed and slotting 2 for VIPROS
$ Tapping: Turret Load
Tapping II, tapping unit, tapping tool
$ Triangle:
Isosceles, right and other triangles
# Usage
Specify a tool application from the following.
$ FORMING PROTOTUDE:
Used for sequencing control.
$ PIERCE PUNCH:
Used for specifying pierce punch for ALPELI. It is Not used for
punching.
$ OUTER SHAPE CUT:
Used for perimeter cutting with auto assignment.
$ NIBBLING:
Used for nibbling with auto assignment.
$ SCRAP CUT:
Not used
$ FINAL CUT:
Not used
$ LIBRA (FORM UP):
Used for LIBRA.
6-10
# Up/Down M-code
Displays an M code added to a NC program for the machine that has
P&F structure.
# Axis Speed
$ F3000C: 0 to 3 6
AP100G CAM Operation Guide I NCT
6-11