Professional Documents
Culture Documents
14 V23cam-Nct0203
14 V23cam-Nct0203
3-1
AP100G CAM Operation Guide I NCT
3.1 Auto Assignment
3
[Assign Tools]-[Auto Assign]
Auto assignment
AP100G CAM Operation Guide I NCT
Operation 1. Click [Assign Tools], [Auto Assign], and [Auto Entire Part].
● When “Display Auto Tool Assignment Option” on Auto Assignment setting
is checked, option setting of auto assignment will appear. Assignment will
Tips
not be performed when “Cancel” button is selected on setting.
● When “Display’Confirm Auto Tool Assignment” on Auto Assignment setting
is checked, the dialog box with result of auto assignment will appear. It
will show number of entities for each standard holes, special shape and
outer shape that was not assigned.
● Non-assigned entities will be displayed in blue.
● The assigned tool path is displayed as a yellow line
● To search from inventory, check “Search Available Tooling when Layout
Single Hit Hole”.
3-2
3.1.2 Holes
[Assign Tools]-[Auto Assign]-[Auto Holes] 3
Auto assignment
AP100G CAM Operation Guide I NCT
3-3
3.2 Setting of Auto Assignment
3
Specify the detailed settings for automatic assignment of each shape Auto assignment
AP100G CAM Operation Guide I NCT
3. Set each item of the [Auto-Punch] sheet and then click the [OK]
button.
● Clicking the [OK] button overwrites and saves the setting values in
Tips
cam_defaut.cjf.
● To save setting values as a new condition setup file, click the [Save as] button.
In the displayed dialog box, specify the save destination (optional) and file
name (.cjf), then save the values.
3-4
Setting the items of the [Condition Setup] dialog box (Auto Assign
(Punching) tab)
3
Auto assignment
AP100G CAM Operation Guide I NCT
Outer Shape
! Method:
Select the process method for outer shape (Perimeter cutting).
Click the button and then select method.
For sheet processing, you cannot select a sketch.
←No assign
←Change sheet size to part size and assign only cutout and
notches.
←Uses sheet size set on Process Setup and Assign tools to
punch out all remaining area.
← Use sheet size set on Process Setup and Assign tools to
cutout only.
3-5
! Direction: 3
Direction of tool assignment. (CW, CCW, Symmetric)
Auto assignment
AP100G CAM Operation Guide I NCT
! Do not assign if the line is less then 1.5 of the punch length:
When it is checked, tool will NOT be assigned to the length that is
less than 1.5 times of the tool length for sharp roof (G66).
! Notch:
It will be activated when process other than No-Assign and sharp
roof are selected.
Select the notch and corner process method for each shape (V
notch, U notch, square notch, corner C, corner L, and corner R).
Click each button and then select the method.
3-6
# Hole
! Special shape hole, round hole, square hole, OB, and RR: 3
Select the method for holes. Click each button and then select
Auto assignment
AP100G CAM Operation Guide I NCT
method.
! Direction:
Select the direction for allocating unusable area leaving to a hole.
! Use +/- Punch Range
When it is checked, it will give range to find single hit tools. Also,
you can select [+ Priority] or [- Priority] to set priority to the larger
size than the hole size or smaller than the hole size to search tool.
! Use +/- Clearance Range
When it is checked, it will give range for clearance. It requires die
clearance set in Punch Master Manager and clearance for material.
It will use clearance set for material and find tool within range
based on priority setting.
! Search Available tool when Layout Single Hit Hole:
When it is checked, Auto assign will look for single hit tool in
inventory if tool was not found in the turret.
! Search condition:
Set Key word to find tool from inventory. The keyword is valid
only when the first check box is selected. When multiple keywords
are specified, the tools that contain the specified keywords in the
tool comment are automatically allocated. It can be used for
separating Thin/Thick turret, tools that is provided from customer,
etc.
3-7
# LIBRA trimming condition
Displayed when the LIBRA is selected.
3
! Clamp-side allocable range:
Auto assignment
AP100G CAM Operation Guide I NCT
3-8
3.2.2 Setup Punching Condition
[File]-[Condition Setup]
3
Set general conditions for punch processing including the overlap
Auto assignment
AP100G CAM Operation Guide I NCT
3-9
Settings in the [Punching condition] condition
3
Auto assignment
AP100G CAM Operation Guide I NCT
3-10
# G68/G69 or G78/G79
– G68/G69 (Nibbling):
Uses G68/G69 for nibbling. Uses G78/G79 if the pitch exceeds the
3
maximum machine pitch. Auto assignment
AP100G CAM Operation Guide I NCT
– G78/G79 (Punching):
Uses G78/G79 for nibbling.
– Delay the punch:
When it is checked, M08/09 will be added to tool hits. This item
must be selected for the thick plate process and forming process. If
using a tool registered as "S" (forming), the punch delay process
will be automatically set. Selecting this item force nibbling to use
"G78/G79 (punching)."
# Max Distance of Tool beyond the Sheet
Specify the limit width for tool center beyond the sheet
Over-travel check will be done based on this value.
– OK (Warning output)
Work size < tool center work size + work allowance width
– NG (Error output)
Work size + work allowance width tool center
# C axis not used
Displayed only for PDC/PDCII.
Specify whether to automatically change a tool that has “AI” assigned
to [Not set] if the tool is used for only 0 degree. It will be referred
when creating turret automatically.
3-11