Professional Documents
Culture Documents
m = S/ L 0.792
Slab type = ( inter =1, discont 1 side= 2 ,
discont 2 side= 3 , discont 3 side= 4 , 3
discont all side= 5 )
CONSTANT
fy ksc 4000
Ultimate of Dead Load (1.2 DL ) kg / m² 480 <-- DL = 2400*0.125+100 ( finishing load on slab)
β= ksc 0.85
Effec Depth of Slab. (Req) (cm) 2.782 3.446 3.855 2.454 2.985 3.436
Check depth of Slab (O.K / No) O.K O.K O.K O.K O.K O.K
ρ require = (1- (1-2xRu/ 0.85 fc' ) )/m 1/m 0.0017 0.0026 0.0033 0.0018 0.0027 0.0036
Check As and spacing of Re-bar Pass/ No Pass Pass Pass Pass Pass Pass
** Remark For the amount of requirement for top rebar in short span = 6.61 > 4.15 anyway
Check Shear Strength actually the opening posititon is not located at the edge of span ( M-max = 2865 kg*m/m.) but
Vu (max ) = 1.15WL/2 2208.0 next to the edge of span =975 mm .,so bending moment is 760 kg*m/m. , therefore a amount of reamining re-bar
DB12@0.40
12.5cm
DB12@0.40