Professional Documents
Culture Documents
LCA Lab 13 20MDELE111
LCA Lab 13 20MDELE111
Section : A
Apparatus :
DC Voltage Source 12V.
One Resister 1k
Switch ON/Off
One Capacitor 1µ
Theory :
Using NI Multisim , study the RC Transient Circuit .
Procedure :
Step 2 :
Go to the Simulations and the Analyses and Simulate .
Step 3 :
Then go to Transient , Initial Condition Set to zero , Start time 0 and the End time
to 0.0001 .
Step 4 :
Then Output and select the Current and the Voltage and run ..
Step 5 :
Go to the Graph Properties and change the Right Axis to the Current (A)
Step 6 :
Go to the Traces and enable the Right Axis to Current (A)
Step 7 :
Then go to the traces and enable the Voltage on the Left Axis
Step 8 :
Precautions :
The Circuit must be grounded .
The Switch must be closed or off .
The End