Professional Documents
Culture Documents
x x x x x x x x 0 1 02/04/19
Update Date
TECHNICAL SPECIFICATIONS – ALUMINUM INGOTS
Page 1 de 2
Al 99.7 / AlSi 3.5 05/10/2023
Review Modified
Date Modifications
Index Page
1 07/02/2023 Creation
2 05/10/2023 Modification
1. PURPOSE
Materials: Al 99.7, AlSi 3.5, AlSi 3.5-2 aluminum ingots (for casting process).
The purpose of this document is to define the technical supply conditions of aluminum ingots
destined for cooking casted products.
• Casting process is carried out with a permanent mold by pouring the molten metal into a
permanent metal mold, under gravity and under centrifugal pressure.
2. COMPOSITION
Update Date
TECHNICAL SPECIFICATIONS – ALUMINUM INGOTS
Page 2 de 2
Al 99.7 / AlSi 3.5 05/10/2023
Alloy with Good mold filling capacity, high resistance to thermal cracking, non-hardenable and good
corrosion resistance.
4. DIMENSIONAL TOLERANCE
5. SURFACE QUALITY
• Supplier must provide certificates that indicate the compliance of the requirements
specified on this document.
• Supplier must provide a sample of each aluminum pallet (batch of molten aluminum) with
the following characteristics:
o Approx diameter: 58 mm
o Approx thickness: 17 mm
o 1 machined face flat - Not concave, not convex
o Smooth surface finish without surface interruptions
o Batch number (batch of molten aluminum)
o Reference picture
LEGAL NOTICE: The information contained in this file there to is confidential and privileged, as per
the Colombian Constitution and the Security Politics of Groupe SEB Andean S.A , and is directed
exclusively to its addressee, with no intention of it being disclosed or revealed to third parties. The
access to the content of this communication by any person different from its addressee is not
authorized by Groupe SEB Andean S.A x and shall be penalized in accordance with the applicable
legal dispositions.