You are on page 1of 48

Test Pattern

(0999DJA161101230010) )0999DJA161101230010)
DISTANCE LEARNING PROGRAMME JEE(Advanced)
TEST # 08
(Academic Session : 2023 - 2024) 15-10-2023

JEE(Main+ Advanced):NURTURE TEST SERIES / JOINT PACKAGE COURSE


11th Undergoing Students

Test Type : Unit Test # 06


Time : 3 Hours Maximum Marks : 222
READ THE INSTRUCTIONS CAREFULLY / Ïi;k bu funs Z ' kks a dks /;ku ls i<+s a
GENERAL / lkekU; %

DO NOT BREAK THE SEALS WITHOUT BEING INSTRUCTED TO DO SO BY THE INVIGILATOR / fujh{kd ds vuqn s'kksa ds fcuk eqg jsa u rksM + s
1. This sealed booklet is your Question Paper. Do not break the seal till you are told to do so.
;g eksgjcU/k iqfLrdk vkidk iz'ui= gSA bldh eqgj rc rd u rksM+s tc rd bldk funsZ'k u fn;k tk;sA
2. Use the Optical Response sheet (ORS) provided separately for answering the questions.
iz'uksa dk mÙkj nsus ds fy, vyx ls nh x;h vkWfIVdy fjLikal 'khV (vks- vkj- ,l-) (ORS) dk mi;ksx djsAa
3. Blank spaces are provided within this booklet for rough work.
dPps dk;Z ds fy, bl iqfLrdk esa [kkyh LFkku fn;s x;s gSAa
4. Write your name, form number and sign in the space provided on the back cover of this booklet.
bl iqfLrdk ds fiNys i`"B ij fn, x, LFkku esa viuk uke o QkWeZ uEcj fyf[k, ,oa gLrk{kj cukb;sA
5. After breaking the seal of the booklet, verify that the booklet contains 46 pages and that all the
18 questions in each subject and along with the options are legible. If not, contact the invigilator for
replacement of the booklet.
bl iqfLrdk dh eqgj rksMu+ s ds ckn Ïi;k tk¡p ysa fd blesa 46 i`"B gSa vkSj izR;sd fo"k; ds lHkh 18 iz'u vkSj muds mÙkj fodYi Bhd
ls i<+s tk ldrs gaSA ;fn ugha] rks iz'ui= dks cnyus ds fy, fujh{kd ls lEidZ djsaA
6. You are allowed to take away the Question Paper at the end of the examination.
ijh{kkFkhZ iz'ui= dks ijh{kk dh lekIrh ij ys tk ldrs gSaA
OPTICAL RESPONSE SHEET / vkWfIVdy fjLikal 'khV (vks-vkj-,l-) %
7. The ORS will be collected by the invigilator at the end of the examination.
vks- vkj- ,l- dks ijh{kk ds lekiu ij fujh{kd ds }kjk ,d= dj fy;k tk,xkA
8. Do not tamper with or mutilate the ORS. Do not use the ORS for rough work.
vks- vkj- ,l- esa gsj&Qsj@foÏfr u djsaA vks-vkj-,l- dk dPps dke ds fy, iz;ksx u djsaA
9. Write your name, form number and sign with pen in the space provided for this purpose on the ORS.
Do not write any of these details anywhere else on the ORS. Darken the appropriate bubble
under each digit of your form number.
viuk uke vkSj QkWeZ uEcj vks-vkj-,l- esa fn, x, [kkuksa esa dye ls fy[ksa vkSj vius gLrk{kj djsaA buesa ls dksbZ Hkh fooj.k
vks-vkj-,l- esa dgha vkS j u fy[ksaA QkWeZ uEcj ds gj vad ds uhps vuq:i cqycqys dks dkyk djsAa
DARKENING THE BUBBLES ON THE ORS / vks-vkj-,l- ij cq ycqyksa dks dkyk djus dh fof/k %
10. Use a BLACK BALL POINT PEN to darken the bubbles on the ORS.
vks-vkj-,l- ds cqycqyksa dks dkys ckW y ikWbUV dye ls dkyk djsaA
11. Darken the bubble COMPLETELY. / cqycqys dks iw.k± :i ls dkyk djsaA
12. The correct way of darkening a bubble is as : / cqycqys dks dkyk djus dk mi;qDr rjhdk gS :
13. The ORS is machine-gradable. Ensure that the bubbles are darkened in the correct way.
vks-vkj-,l- e'khu tk¡P; gSA lqfuf'pr djsa dh cqycqys lgh fof/k ls dkys fd, x;sa gASa
14. Darken the bubbles ONLY IF you are sure of the answer. There is NO WAY to erase or
"un-darken" a darkened bubble.
cqycqys dks rHkh dkyk djsa tc vki mÙkj ds ckjs esa fuf'pr gksA dkys fd, gq, cqycqys dks feVkus vFkok lkQ djus dk dksbZ rjhdk ugha gAS
15. Take g = 10 m/s2 unless otherwise stated. / g = 10 m/s2 iz;qDr djs]a tc rd fd vU; dksbZ eku ugha fn;k x;k gksA
QUESTION PAPER FORMAT / iz' ui= dk izk:i %
16. The question paper has three parts : Physics, Chemistry and Mathematics.
bl iz'ui= esa rhu Hkkx gSa % HkkSfrd foKku] jlk;u foKku ,oa xf.krA
Note : No questions have been asked in the section III of this paper. Please leave section III
blank on the OMR answer sheet.
Target : JEE (Main + Advanced) 2025/15-10-2023
ALLEN®
SYLLABUS :
PHYSICS : Center Of Mass, Momentum & Collision
CHEMISTRY : Electronic Displacement Effects, Acidic Strength & Basic Strength
MATHEMATICS : Circle

SOME USEFUL CONSTANTS


Atomic No. : H = 1, B = 5, C = 6, N = 7, O = 8, F = 9, Al = 13, P = 15, S = 16,
Cl = 17, Br = 35, Xe = 54, Ce = 58
Atomic masses : H = 1, Li = 7, B = 11, C = 12, N = 14, O = 16, F = 19, Na = 23, Mg = 24,
Al = 27, P = 31, S = 32, Cl = 35.5, Ca=40, Fe = 56, Br = 80, I = 127,
Xe = 131, Ba=137, Ce = 140, Cu = 63.5, Ne = 20, K = 39, Mn = 55
Space for Rough Work / dPps dk;Z ds fy, LFkku

Note : In case of any correction in the test paper, please mail to dlpcorrections@allen.in within 2 days along with Paper Code
& Your Form No.
(uksV % ;fn bl iz'u i= esa dksbZ Correction gks rks Ïi;k Paper Code ,oa vkids Form No. ,oa iw.kZ Test Details ds lkFk 2 fnu ds vUnj
dlpcorrections@allen.in ij mail djsAa )

FTS-2/46 0999DJA161101230010
Nurture Test Series/Joint Package Course/15-10-2023

BEWARE OF NEGATIVE MARKING

PART-1 : PHYSICS
भाग-1 : भौतिक विज्ञान
SECTION-I (i) : (Maximum Marks: 12)
खण्ड-I (i) : (अधिकतम अंक: 12)
This section contains FOUR (04) questions.
Each question has FOUR options (A), (B), (C) and (D). ONLY ONE of these four options is the
correct answer.
For each question, choose the option corresponding to the correct answer.
Answer to each question will be evaluated according to the following marking scheme :
Full Marks : +3 If ONLY the correct option is chosen.
Zero Marks : 0 If none of the options is chosen (i.e. the question is unanswered)
Negative Marks : –1 In all other cases
इस खण्ड में चार (04) प्रश्न हैं
प्रत्येक प्रश्न में चार उत्तर विकल्प (A), (B), (C) और (D) हैं। जिनमें के वल एक ही सही हैं।
प्रत्येक प्रश्न के लिए सही उत्तर विकल्प के अनुरूप विकल्प को चुनें।
प्रत्येक प्रश्न के लिए अंक निम्नलिखित परिस्थितियों में से किसी एक के अनुसार दिये जाएंगेः
पूर्ण अंक : +3 यदि सिर्फ सही विकल्प को चुना गया है।
शून्य अंक : 0 यदि किसी भी विकल्प को नहीं चुना गया है
ऋण अंक : –1 अन्य सभी परिस्थितियों में।
1. A ball weighing 0.01 kg hits a hard surface vertically with a speed of 5 m/s and rebounds with the same
speed. The ball remains in contact with the surface for 0.01 s. The average force exerted by the surface
on the ball in Newton is :-
एक गेंद का भार 0.01 kg है, यह एक कठोर सतह से 5 m/s की चाल से ऊर्ध्वाधर टकराकर समान चाल से वापस लौट जाती है।
गेंद सतह के साथ 0.01 s तक सम्पर्क में रहती है। सतह द्वारा गेंद पर लगाया गया औसत बल न्यूटन में होगा :-
(A) 10.0 (B) 1.0 (C) 5.0 (D) 0

Space for Rough Work / कच्चे कार्य के लिए स्थान

0999DJA161101230010 FTS-3/46
Target : JEE (Main + Advanced) 2025/15-10-2023
2. A man of mass M stands at one end of a plank of length L which lies at rest on a frictionless surface. The
man walks to the other end of the plank. If the mass of the plank is M/3, the distance that the man moves
relative to the ground is
(A) 3 L/4 (B) 4 L/5 (C) L/4 (D) none of these
घर्षणरहित सतह पर विरामावस्था में स्थित L लम्बाई के तख्ते के एक सिरे पर M द्रव्यमान का व्यक्ति खड़ा है। व्यक्ति तख्ते के दूसरे
सिरे तक चलता है। यदि तख्ते का द्रव्यमान M/3 है, तो व्यक्ति द्वारा धरातल के सापेक्ष चली गयी दूरी है -
(A) 3 L/4 (B) 4 L/5 (C) L/4 (D) इनमें से कोई नहीं
3. y-coordinate of COM of given system will be at :-
प्रदर्शित निकाय के द्रव्यमान के न्द्र का y-निर्देशांक कहाँ पर होगा ?

(A) R (B) −R (C) 2R (D) −2R


3π 3π 3π 3π
4. k . x2
The centre of mass of a non uniform rod of length L whose mass per unit length λ varies as λ =
L
where k is a constant & x is the distance of any point on rod from its one end, is :- (from the same end)
k . x2
L लम्बाई की असमरूप छड़ की एकांक लम्बाई का द्रव्यमान λ समीकरण λ = के अनुसार परिवर्तित होता है, जहाँ k
L
स्थिरांक तथा इसके एक सिरे से छड़ पर स्थित किसी बिन्दु की दूरी x है, तब छड़ के द्रव्यमान के न्द्र की समान सिरे से दूरी है :-
3 1 k 3k
(A) L (B) L (C) (D)
4 4 L L

Space for Rough Work / कच्चे कार्य के लिए स्थान

FTS-4/46 0999DJA161101230010
Nurture Test Series/Joint Package Course/15-10-2023
SECTION-I (ii) : (Maximum Marks: 16)
खण्ड-I (ii) : (अधिकतम अंक: 16)
This section contains FOUR (04) questions.
This section contains TWO paragraphs.
Based on each paragraph, there are TWO questions
Each question has Four options (A), (B), (C) and (D) ONE OR MORE THAN ONE of these four
option(s) is(are) correct.
For each question, choose the option(s) corresponding to (all ) the correct answer(s)
Answer to each question will be evaluated according to the following marking scheme:
Full Marks : +4 If only (all) the correct option(s) is (are) chosen.
Partial Marks : +3 If all the four options are correct but ONLY three options are chosen.
Partial Marks : +2 If three or more options are correct but ONLY two options are chosen,
both of which are correct options.
Partial Marks : +1 If two or more options are correct but ONLY one option is chosen and it is
a correct option.
Zero Marks : 0 If none of the options is chosen (i.e. the question is unanswered).
Negative Marks : –2 In all other cases.
For Example : If first, third and fourth are the ONLY three correct options for a question with second
option being an incorrect option; selecting only all the three correct options will result in +4 marks.
Selecting only two of the three correct options (e.g. the first and fourth options), without selecting
any incorrect option (second option in this case), will result in +2 marks. Selecting only one of the
three correct options (either first or third or fourth option), without selecting any incorrect option
(second option in this case), will result in +1 marks. Selecting any incorrect option(s) (second option
in this case), with or without selection of any correct option(s) will result in –2 marks.
इस खण्ड में चार (04) प्रश्न हैं
इस खण्ड में दो अनुच्छेद हैं
प्रत्येक अनुच्छेद पर दो प्रश्न दिए गयें हैं।
प्रत्येक प्रश्न में चार विकल्प (A), (B), (C) और (D) हैं जिनमें से एक या एक से अधिक विकल्प सही हैं।
प्रत्येक प्रश्न के लिए, प्रश्न का (के ) उत्तर देने हेतु सही विकल्प (विकल्पों) को चुने।
प्रत्येक प्रश्न के उत्तर का मूल्यांकन निम्न अंकन योजना के अनुसार होगा :
पूर्ण अंक : +4 यदि के वल (सारे) सही विकल्प (विकल्पों) को चुना गया है।
आंशिक अंक : +3 यदि चारों विकल्प सही हैं परन्तु के वल तीन विकल्पों को चुना गया है।
आंशिक अंक : +2 यदि तीन या तीन से अधिक विकल्प सही हैं परन्तु के वल दो विकल्पों को चुना गया है और चुने हुए
दोनों विकल्प सही विकल्प हैं।
आंशिक अंक : +1 यदि दो या दो से अधिक विकल्प सही हैं परन्तु के वल एक विकल्प को चुना गया है और चुना हुआ
विकल्प सही विकल्प हैं।
शून्य अंक : 0 यदि किसी भी विकल्प को नहीं चुना गया है (अर्थात् प्रश्न अनुत्तरित है)।
ऋण अंक : –2 अन्य सभी परिस्थितियों में।
उदाहरण स्वरूप : यदि किसी प्रश्न के लिए के वल पहला, तीसरा एवं चौथा सही विकल्प हैं और दूसरा विकल्प गलत है; तो
के वल सभी तीन सही विकल्पों का चयन करने पर ही +4 अंक मिलेंगें। बिना कोई गलत विकल्प चुने
(इस उदाहरण में दूसरा विकल्प) तीन सही विकल्पों में से सिर्फ दो को चुनने पर (उदाहरणतः पहला तथा चौथा विकल्प) +2
अंक मिलेंगे। बिना कोई गलत विकल्प चुने (इस उदाहरण में दूसरा विकल्प)] तीन सही विकल्पों में से सिर्फ एक को चुनने पर
(पहला या तीसरा या चौथा विकल्प) +1 अंक मिलेंगे। कोई भी गलत विकल्प चुनने पर (इस उदाहरण में दूसरा विकल्प), –2
अंक मिलेंगे, चाहे सही विकल्प (विकल्पों) को चुना गया हो या न चुना गया हो।

0999DJA161101230010 FTS-5/46
Target : JEE (Main + Advanced) 2025/15-10-2023
Paragraph for Questions 5 and 6
प्रश्न 5 एवं 6 के लिये अनुच्छेद
A brother and sister live near a lake. In the middle of winter, when the lake is solidly and smoothly
frozen, they play catch by sliding a rock back and forth between them across the ice. Ignore all friction.
The mass of the two children is 40 kg each. and the rock has a mass of 2.0 kg. Each time the rock is
given a push by the child who has just caught it, it leaves the hand with a speed of 1.0 m/s (relative to
the ground). The children are initially at rest, and the sister first slides the rock toward her brother.
एक लड़का तथा उसकी बहिन किसी झील के नजदीक रहते है। सर्दियों के मध्य में जब झील बिना घर्षण जम कर कठोर हो जाती है
तो दोनों इस झील पर जमी हुयी बर्फ पर इनके मध्य एक पत्थर को आगें-पीछे सरकाते हुए उसे पकड़ने का खेल खेलते है। सभी
घर्षणों को नगण्य माने। दोनों में से प्रत्येक बच्चे का द्रव्यमान 40 kg है तथा पत्थर का द्रव्यमान 2.0 kg है। प्रत्येक बार जब भी एक
बच्चा पत्थर को पकड़ने के तुरन्त बाद इसे धके लता है तो यह पत्थर उसके हाथ से धरातल के सापेक्ष 1.0 m/s चाल से छू टता है।
बच्चे प्रारम्भ में विरामावस्था में है तथा सर्वप्रथम उसकी बहिन इस पत्थर को अपने भाई की ओर सरकाती है।
5. What is the velocity of the brother after he has first time received the rock and pushed it back to the sister ?
लड़के का वेग क्या होगा जब उसने प्रथम बार पत्थर को पकड़कर पुनः उसे अपनी बहिन की ओर धके ला था?
(A) 0.1 m/s (B) 0.2 m/s (C) 0.3 m/s (D) 0.05 m/s
6. What is the maximum number of times that the sister can push the rock?
लड़की अधिकतम कितनी बार पत्थर को धके ल सकती है?
(A) 9 (B) 8 (C) 10 (D) 11
Space for Rough Work / कच्चे कार्य के लिए स्थान

FTS-6/46 0999DJA161101230010
Nurture Test Series/Joint Package Course/15-10-2023
Paragraph for Questions 7 and 8
प्रश्न 7 एवं 8 के लिये अनुच्छेद
Particle 1 of mass m1 is initially moving in the positive x-direction (to the right in the figure) with a
speed v1.0 and collides with a second particle 2 of mass m2 = m1/3, which is initially moving in the
opposite direction (to the left in the figure) with an unknown speed v2,0. Assume that the total external
force acting on the particles is zero. You do not know whether or not the collision is elastic. After the
collision particle 1 moves with a speed v1,f = v1,0/2 downward, at an angle θ 1,f = 90° with respect to
the positive x-direction (see figure). After the collision, particle 2 moves with an unknown speed v2,f at
an angle θ 2,f = 45° upward with respect to the positive x-direction (see figure).

द्रव्यमान m1 वाला एक कण 1 प्रारम्भ में धनात्मक x-दिशा (चित्र में दाँयी ओर) में v1.0 चाल से गतिशील है तथा द्रव्यमान m2 = m1/3
वाले एक द्वितीय कण 2 से टकराता है जो प्रारम्भ में एक अज्ञात चाल v2,0 से विपरीत दिशा (चित्र में बाँयी ओर) में गतिशील है। माना
कणों पर कार्यरत कु ल बाह्य बल शून्य है। यहाँ यह ज्ञात नही है कि टक्कर प्रत्यास्थ है अथवा नही। टक्कर के बाद कण 1 चित्रानुसार
धनात्मक x-दिशा के सापेक्ष कोण θ 1,f = 90° पर चाल v1,f = v1,0/2 से नीचे की ओर गति करता है। टक्कर के बाद कण 2 एक अज्ञात
चाल v2,f के साथ धनात्मक x-दिशा के सापेक्ष कोण θ 2,f = 45° पर ऊपर की ओर गति करता है।

7. The speed v2,f in terms of v1,0 is :


चाल v2,f का मान v1,0 के पदों में होगा :-
(A) √ 2 (B) 3 (C) 3 (D) 2
v1,0 v1,0 √
v1,0 √ v1,0
3 √ 2 2 3
8. Final mechanical energy of system is
निकाय की अंतिम यांत्रिक ऊर्जा होगी :-
1 8 7 1
(A) m1 v21,0 (B) m1 v21,0 (C) m1 v21,0 (D) m1 v21,0
8 7 8 7

Space for Rough Work / कच्चे कार्य के लिए स्थान

0999DJA161101230010 FTS-7/46
Target : JEE (Main + Advanced) 2025/15-10-2023
SECTION-I (iii) : (Maximum Marks: 6)
खण्ड-I (iii) : (अधिकतम अंक: 6)
This section contains TWO (02) questions.
Each question has matching lists. The codes for the lists have choices (A), (B), (C) and (D) out of
which ONLY ONE is correct
For each question, marks will be awarded in one of the following categories :
Full Marks : +3 If ONLY the correct option is chosen.
Zero Marks : 0 If none of the options is chosen (i.e. the question is unanswered)
Negative Marks : –1 In all other cases
इस खण्ड में दो (02) प्रश्न हैं
प्रत्येक प्रश्न में सुमेलन सूची है। सूचियों के लिए कोड के विकल्प (A), (B), (C) और (D) हैं जिनमें से के वल एक सही है।
प्रत्येक प्रश्न के लिए अंक निम्नलिखित परिस्थितियों में से किसी एक के अनुसार दिये जाएंगे :
पूर्ण अंक : +3 यदि के वल सही विकल्प को चुना गया है।
शून्य अंक : 0 यदि किसी भी विकल्प को नहीं चुना गया है (अर्थात् प्रश्न अनुत्तरित है)।
ऋण अंक : –1 अन्य सभी परिस्थितियों में।

FTS-8/46 0999DJA161101230010
Nurture Test Series/Joint Package Course/15-10-2023
9. Answer the following by appropriately matching the lists based on the information given in the paragraph.
A particle of mass m is projected with velocity v and at an angle θ with horizontal then match the
following list.
List-I List-II
Change in momentum between point of
(P) projection and point at which it strikes on (1) mv cos θ
horizontal surface
(Q) Radius of curvature at highest point (2) 2mv sin θ
(R) Minimum momentum is (3) mv sin θ
Magnitude of change in momentum
v2 cos2 θ
(S) between point of projection and highest (4)
g
point
द्रव्यमान m वाले एक कण को क्षैतिज से θ कोण पर वेग v से प्रक्षेपित किया जाता है। सूची मिलान कीजिये।
सूची-I सूची-II
प्रक्षेपण बिन्दु तथा क्षैतिज सतह पर वह बिन्दु जहाँ
(P) (1) mv cos θ
कण टकराता है, के मध्य संवेग में परिवर्तन होगा
(Q) उच्चतम बिन्दु पर वक्रता त्रिज्या है (2) 2mv sin θ
(R) न्यूनतम संवेग का मान है (3) mv sin θ
प्रक्षेपण बिन्दु तथा उच्चतम बिन्दु के मध्य संवेग में v2 cos2 θ
(S) (4)
परिवर्तन का परिमाण होगा g

(A) P → 3;Q → 1;R → 4;S → 2 (B) P → 2;Q → 4;R → 3;S → 1


(C) P → 2;Q → 4;R → 1;S → 3 (D) P → 4;Q → 2;R → 1;S → 3

Space for Rough Work / कच्चे कार्य के लिए स्थान

0999DJA161101230010 FTS-9/46
Target : JEE (Main + Advanced) 2025/15-10-2023
10. Answer the following by appropriately matching the lists based on the information given in the paragraph.
Two men of mass 60 kg and 80 kg stand on a plank of mass 20 kg. Both of them can jump with a velocity
of 1 m/s relative to the plank. In each event shown in list-I, find the velocity of plank after the event.
List-I List-II
(P) Ram alone jumps to the left (1) – 17 m/s
40
(Q) Shyam alone jumps to the right (2) 1
– m/s
2
(R) Ram jumps to left and shyam jumps to right simultaneously. (3) 3
m/s
8
(S) Ram jumps to left and after that shyam jumps to right (4) 1
– m/s
8

अनुच्छेद में दी गयी जानकारी के आधार पर सूचियों का उचित मिलान करके प्रश्न का उत्तर दें।
60 kg तथा 80 kg द्रव्यमान के दो व्यक्ति 20 kg द्रव्यमान वाले एक तख्ते पर खड़े हैं। दोनों तख्ते के सापेक्ष 1 m/s वेग से कू द
सकते हैं। सूची-I में प्रदर्शित प्रत्येक क्षण पर घटना के बाद तख्ते का वेग ज्ञात कीजिए।

सूची-I सूची-II
(P) राम अके ला बाँयी ओर कू दता है। (1) 17
– m/s
40
(Q) श्याम अके ला दाँयी ओर कू दता है। (2) 1
– m/s
2
(R) राम तथा श्याम एक साथ क्रमशः बाँयी तथा दाँयी ओर कू दते हैं। (3) 3
m/s
8
(S) राम बाँयी ओर कू दता है तथा उसके बाद श्याम दाँयी ओर कू दता है। (4) 1
– m/s
8
(A) P → 1;Q → 2;R → 4;S → 3 (B) P → 3;Q → 2;R → 4;S → 1
(C) P → 2;Q → 3;R → 4;S → 1 (D) P → 1;Q → 4;R → 3;S → 2

Space for Rough Work / कच्चे कार्य के लिए स्थान

FTS-10/46 0999DJA161101230010
Nurture Test Series/Joint Package Course/15-10-2023
SECTION-II : (Maximum Marks: 24)
खण्ड-II : (अधिकतम अंक: 24)
This section contains SIX (06) questions. The answer to each question is a NUMERICAL VALUE.
For each question, enter the correct numerical value of the answer in the place designated to enter the
answer. If the numerical value has more than two decimal places, truncate/round-off the value to
Two decimal places; e.g. 6.25, 7.00, –0.33, –.30, 30.27, –127.30, if answer is 11.36777..... then both
11.36 and 11.37 will be correct)
Answer to each question will be evaluated according to the following marking scheme:
Full Marks : +4 If ONLY the correct numerical value is entered.
Zero Marks : 0 In all other cases.
इस खंड में छः (06) प्रश्न हैं। प्रत्येक प्रश्न का उत्तर एक संख्यात्मक मान (NUMERICAL VALUE) है।
प्रत्येक प्रश्न के उत्तर के सही संख्यात्मक मान (दशमलव अंकन में, दशमलव के द्वितीय स्थान तक रूण्डित/निकटित; उदाहरण
6.25, 7.00, –0.33, –.30, 30.27, –127.30, यदि उत्तर 11.36777..... है, तो 11.36 और 11.37 दोनों सही होगें)
प्रत्येक प्रश्न के उत्तर का मूल्यांकन निम्न अंकन योजना के अनुसार होगा
पूर्ण अंक : +4 यदि सिर्फ सही संख्यात्मक मान (Numerical value) ही उत्तर स्वरूप दर्ज किया गया है।
शून्य अंक : 0 अन्य सभी परिस्थितियों में।
1. A bomb of 12 kg divides in two parts whose ratio of masses is 1 : 3. If kinetic energy of smaller part is
216 J, then momentum of bigger part in kg-m/sec will be
12 kg का एक बम दो भागों में विभाजित होता है, जिसके द्रव्यमानों का अनुपात 1 : 3 है। यदि छोटे भाग की गतिज ऊर्जा 216 J है तो बड़े
भाग का संवेग kg-m/sec में ज्ञात कीजिये।
2. x
The centre of mass of two masses m & m' moves by distance when mass m is moved by distance x
5
m′
and m' is kept fixed. The ratio is :-
m
x
दो द्रव्यमानों m एवं m' का द्रव्यमान कें द्र दूरी से खिसक जाता है, जब m' को स्थिर रखते हुए m को x दूरी से खिसकाया जाता
5
m′
है तो का मान ज्ञात कीजिये।
m

Space for Rough Work / कच्चे कार्य के लिए स्थान

0999DJA161101230010 FTS-11/46
Target : JEE (Main + Advanced) 2025/15-10-2023

3. Point masses of values 1, 1 , 1 ,.... ∞ in number are placed at x = 1, 1 1


, ,...... ∞ respectively. Locate
2 4 2 4
the centre of mass of the system.
1 1 1 1
मान 1, , ,.... ∞ वाले बिन्दु द्रव्यमान क्रमशः x = 1, , ,...... ∞ पर रखे है तो निकाय के द्रव्यमान के न्द्र की स्थिति
2 4 2 4
ज्ञात कीजिये।
4. A ball of mass 1 kg drops vertically on to the floor with a speed of 25 m/s. It rebounds with an initial
velocity of 10 m/s. What impulse (in kg-m/s) acts on the ball during contact?
एक 1 kg द्रव्यमान की गेंद 25 m/s की चाल के साथ एक फर्श पर ऊर्ध्वाधर गिरती है। यह 10 m/s के प्रारम्भिक वेग से उछलती
है। सम्पर्क के दौरान गेंद पर कितना आवेग (kg-m/s में) लगता है?

Space for Rough Work / कच्चे कार्य के लिए स्थान

FTS-12/46 0999DJA161101230010
Nurture Test Series/Joint Package Course/15-10-2023
5. Two blocks of mass 3 kg and 6 kg respectively are placed on a smooth horizontal surface. They are
connected by a light spring of force constant k = 50 N/m. Initially the spring is unstretched and the
indicated velocities are imparted to the blocks. Find maximum extension (in cm) of the spring.
क्रमशः 3 kg तथा 6 kg द्रव्यमान वाले दो ब्लाॅक चिकनी क्षैतिज सतह पर रखे हैं। यह दोनों k = 50 N/m बल नियतांक
वाली हल्की स्प्रिंग से जुड़े है। प्रारम्भ में स्प्रिंग अतनित है एवं ब्लाॅकों को दिये गये वेग दर्शाये गये है। स्प्रिंग में अधिकतम विस्तार
(सेमी. में) ज्ञात कीजिए।

6. A particle of mass 1kg collides and sticks with 5kg block, connected to spring at natural length. If the
maximum compression in the spring in subsequent motion is α (in meter). Fill the value of 4 α .
द्रव्यमान 1kg वाला एक कण, मूल लम्बाई वाली स्प्रिंग से जुड़े 5kg ब्लाॅक के साथ टकराकर चिपक जाता है। यदि तदोपरान्त गति
में स्प्रिंग में उत्पन्न अधिकतम संपीडन α (मीटर में) हो तो 4 α का मान ज्ञात कीजिये।

Space for Rough Work / कच्चे कार्य के लिए स्थान

Note : No questions have been asked in the section III of this paper. Please leave section III
blank on the OMR answer sheet.

0999DJA161101230010 FTS-13/46
Target : JEE (Main + Advanced) 2025/15-10-2023
SECTION-IV : (Maximum Marks: 16)
खण्ड-IV : (अधिकतम अंक: 16)
This section contains TWO (02) questions.
Each question contains two columns, Column-I and Column-II.
Column-I has four entries (A), (B), (C) and (D)
Column-II has five entries (P), (Q), (R), (S) and (T)
Match the entries in Column-I with the entries in Column-II.
One or more entries in Column-I may match with one or more entries in Column-II.
For each entry in Column-I, darken the options of all the matching entries. For example, if entry (A) in
Column-I matches with entries (Q), (R) and (T), then chosen these three options. Similarly, for entries
(B), (C) and (D).
For each question, marks will be awarded in one of the following categories :
For each entry in Column-I
Full Marks : +2 If only the option(s) corresponding to all the correct match(es) is (are) chosen
Zero Marks : 0 In all other cases
इस खण्ड में दो (02) प्रश्न हैं
प्रत्येक प्रश्न में दो काॅलम हैं, काॅलम-I तथा काॅलम-II
काॅलम-I में चार प्रविष्टयाँ (A), (B), (C) तथा (D) हैं
काॅलम-II में पाँच प्रविष्टियाँ (P), (Q), (R), (S) तथा (T) हैं
काॅलम-I की प्रविष्टियों का काॅलम-II की प्रविष्टियों से सुमेलित करें
काॅलम-I की एक या एक से अधिक प्रविष्टियाँ, काॅलम-II की एक या एक से अधिक प्रविष्टियों से सुमेलित हो सकती हैं
काॅलम-I की प्रत्येक प्रविष्टि के लिए सभी सुमेलित प्रविष्टियों के विकल्पों को चुनें। उदाहरण स्वरूप, यदि काॅलम-I की प्रविष्टि
(A) प्रविष्टियों (Q), (R) तथा (T) से सुमेलित हो, तो इन तीनों विकल्पों को चुनें। इसी प्रकार प्रविष्टियों (B), (C) तथा (D) के
लिये भी करें
अंकन योजना :
काॅलम-I की प्रत्येक प्रविष्टि के लिए
पूर्ण अंक : +2 यदि के वल (सारे) सही विकल्प (विकल्पों) को चुना गया है।
शून्य अंक : 0 अन्य सभी अवस्थाओं में

FTS-14/46 0999DJA161101230010
Nurture Test Series/Joint Package Course/15-10-2023
1. Consider two spherical masses A and B having same density as shown in figure. Spheres are released
from rest in freespace at an initial separation 21 m. The only interaction force acting on two spheres due
to each other is constant in magnitude of 2 N and attractive in nature. Collision is inelastic with
1
coefficient of restitution ( ). Mass of B is 1 kg. If magnitude of velocities of A, B before and after the
2
collision are v1, v2 and .

Column-I Column-II
(A) v1 (P) 1
m/s
2
(B) v2 (Q) 8 m/s
(C) (R) 4 m/s
(D) (S) 1 m/s
(T) 0 m/s

समान घनत्व वाले दो गोलाकार द्रव्यमानों A व B पर विचार कीजिये। इन्हे मुक्त आकाश में चित्रानुसार 21 m की प्रारम्भिक दूरी के
साथ विरामावस्था से छोड़ा जाता है। इन दोनों गोलों पर एक-दूसरे के कारण लगने वाला एक मात्र अन्योन्य बल परिमाण में नियत है
एवं इसका मान 2 N है तथा यह आकर्षी प्रकृ ति का है। होने वाली टक्कर अप्रत्यास्थ होती है तथा प्रत्यावस्थान गुणांक का मान
1
( ) है। B का द्रव्यमान 1 kg है। टक्कर से पूर्व तथा बाद में A व B के वेगों के परिमाण क्रमश: v1, v2 तथा हो तो :-
2

काॅलम-I काॅलम-II
(A) v1 (P) 1
m/s
2
(B) v2 (Q) 8 m/s
(C) (R) 4 m/s
(D) (S) 1 m/s
(T) 0 m/s

Space for Rough Work / कच्चे कार्य के लिए स्थान

0999DJA161101230010 FTS-15/46
Target : JEE (Main + Advanced) 2025/15-10-2023
2. Four point masses are placed at four corners of a square of side 4 m as shown. Match the quantities in
Column-I to their respective values in Column-II.
Column-I Column-II
(A) x co-ordinate of centre of mass of 4 kg and 2 kg (P) 7
m
2
(B) x co-ordinate of centre of mass of 4 kg, 2 kg and 3 kg (Q) 4
m
3
(C) y co-ordinate of centre of mass of 1 kg, 4 kg and 3 kg (R) 3m
(D) y co-ordinate of centre of mass of 1 kg and 3 kg (S) 20
m
9
(T) 4m

भुजा 4 m वाले एक वर्ग के चारों कोनों पर चार बिन्दु द्रव्यमान चित्रानुसार स्थित है। काॅलम-I में वर्णित राशियों का काॅलम-II में
उनके संगत मानों से मिलान कीजिये।

काॅलम-I काॅलम-II
(A) 4 kg व 2 kg के द्रव्यमान के न्द्र का x-निर्देशांक (P) 7
m
2
(B) 4 kg, 2 kg व 3 kg के द्रव्यमान के न्द्र का x-निर्देशांक (Q) 4
m
3
(C) 1 kg, 4 kg व 3 kg के द्रव्यमान के न्द्र का y-निर्देशांक (R) 3m
(D) 1 kg व 3 kg के द्रव्यमान के न्द्र का y-निर्देशांक (S) 20
m
9
(T) 4m

Space for Rough Work / कच्चे कार्य के लिए स्थान

FTS-16/46 0999DJA161101230010
Nurture Test Series/Joint Package Course/15-10-2023
PART-2 : CHEMISTRY
भाग-2 : रसायन विज्ञान
SECTION-I (i) : (Maximum Marks: 12)
खण्ड-I (i) : (अधिकतम अंक: 12)
This section contains FOUR (04) questions.
Each question has FOUR options (A), (B), (C) and (D). ONLY ONE of these four options is the
correct answer.
For each question, choose the option corresponding to the correct answer.
Answer to each question will be evaluated according to the following marking scheme :
Full Marks : +3 If ONLY the correct option is chosen.
Zero Marks : 0 If none of the options is chosen (i.e. the question is unanswered)
Negative Marks : –1 In all other cases
इस खण्ड में चार (04) प्रश्न हैं
प्रत्येक प्रश्न में चार उत्तर विकल्प (A), (B), (C) और (D) हैं। जिनमें के वल एक ही सही हैं।
प्रत्येक प्रश्न के लिए सही उत्तर विकल्प के अनुरूप विकल्प को चुनें।
प्रत्येक प्रश्न के लिए अंक निम्नलिखित परिस्थितियों में से किसी एक के अनुसार दिये जाएंगेः
पूर्ण अंक : +3 यदि सिर्फ सही विकल्प को चुना गया है।
शून्य अंक : 0 यदि किसी भी विकल्प को नहीं चुना गया है
ऋण अंक : –1 अन्य सभी परिस्थितियों में।
1. Correct order of stability of resonating structures is :
अनुनादी संरचनाओं के स्थायित्व का सही क्रम है :

(i) (ii) (iii) (iv)


(A) i > iii > ii > iv (B) i > ii > iii > iv
(C) i > iii > iv > ii (D) i > iv > ii > iii

Space for Rough Work / कच्चे कार्य के लिए स्थान

0999DJA161101230010 FTS-17/46
Target : JEE (Main + Advanced) 2025/15-10-2023

2.

Then (x + y) has value -

तो (x + y) का मान है-
(A) 8 (B) 10 (C) 7 (D) 9

Space for Rough Work / कच्चे कार्य के लिए स्थान

FTS-18/46 0999DJA161101230010
Nurture Test Series/Joint Package Course/15-10-2023
3. Arrange the following amines in the decreasing order of basicity :
निम्न एमीनो को क्षारकता के घटते क्रम में व्यवस्थित कीजिएः

(I) (II) (III)

(A) (I) > (III) > (II) (B) (III) > (I) > (II)
(C) (III) > (II) > (I) (D) (I) > (II) > (III)
4. Which is incorrect order of stability of reaction intermediates ?
अभिक्रिया मध्यवर्ती के स्थायित्व का गलत क्रम कौनसा है-

(A) (B)

(C) (D) CΘ Cl3 Θ Θ


> C F3 > C (CH3 )3

Space for Rough Work / कच्चे कार्य के लिए स्थान

0999DJA161101230010 FTS-19/46
Target : JEE (Main + Advanced) 2025/15-10-2023
SECTION-I (ii) : (Maximum Marks: 16)
खण्ड-I (ii) : (अधिकतम अंक: 16)
This section contains FOUR (04) questions.
This section contains TWO paragraphs.
Based on each paragraph, there are TWO questions
Each question has Four options (A), (B), (C) and (D) ONE OR MORE THAN ONE of these four
option(s) is(are) correct.
For each question, choose the option(s) corresponding to (all ) the correct answer(s)
Answer to each question will be evaluated according to the following marking scheme:
Full Marks : +4 If only (all) the correct option(s) is (are) chosen.
Partial Marks : +3 If all the four options are correct but ONLY three options are chosen.
Partial Marks : +2 If three or more options are correct but ONLY two options are chosen,
both of which are correct options.
Partial Marks : +1 If two or more options are correct but ONLY one option is chosen and it is
a correct option.
Zero Marks : 0 If none of the options is chosen (i.e. the question is unanswered).
Negative Marks : –2 In all other cases.
For Example : If first, third and fourth are the ONLY three correct options for a question with second
option being an incorrect option; selecting only all the three correct options will result in +4 marks.
Selecting only two of the three correct options (e.g. the first and fourth options), without selecting
any incorrect option (second option in this case), will result in +2 marks. Selecting only one of the
three correct options (either first or third or fourth option), without selecting any incorrect option
(second option in this case), will result in +1 marks. Selecting any incorrect option(s) (second option
in this case), with or without selection of any correct option(s) will result in –2 marks.
इस खण्ड में चार (04) प्रश्न हैं
इस खण्ड में दो अनुच्छेद हैं
प्रत्येक अनुच्छेद पर दो प्रश्न दिए गयें हैं।
प्रत्येक प्रश्न में चार विकल्प (A), (B), (C) और (D) हैं जिनमें से एक या एक से अधिक विकल्प सही हैं।
प्रत्येक प्रश्न के लिए, प्रश्न का (के ) उत्तर देने हेतु सही विकल्प (विकल्पों) को चुने।
प्रत्येक प्रश्न के उत्तर का मूल्यांकन निम्न अंकन योजना के अनुसार होगा :
पूर्ण अंक : +4 यदि के वल (सारे) सही विकल्प (विकल्पों) को चुना गया है।
आंशिक अंक : +3 यदि चारों विकल्प सही हैं परन्तु के वल तीन विकल्पों को चुना गया है।
आंशिक अंक : +2 यदि तीन या तीन से अधिक विकल्प सही हैं परन्तु के वल दो विकल्पों को चुना गया है और चुने हुए
दोनों विकल्प सही विकल्प हैं।
आंशिक अंक : +1 यदि दो या दो से अधिक विकल्प सही हैं परन्तु के वल एक विकल्प को चुना गया है और चुना हुआ
विकल्प सही विकल्प हैं।
शून्य अंक : 0 यदि किसी भी विकल्प को नहीं चुना गया है (अर्थात् प्रश्न अनुत्तरित है)।
ऋण अंक : –2 अन्य सभी परिस्थितियों में।
उदाहरण स्वरूप : यदि किसी प्रश्न के लिए के वल पहला, तीसरा एवं चौथा सही विकल्प हैं और दूसरा विकल्प गलत है; तो
के वल सभी तीन सही विकल्पों का चयन करने पर ही +4 अंक मिलेंगें। बिना कोई गलत विकल्प चुने
(इस उदाहरण में दूसरा विकल्प) तीन सही विकल्पों में से सिर्फ दो को चुनने पर (उदाहरणतः पहला तथा चौथा विकल्प) +2
अंक मिलेंगे। बिना कोई गलत विकल्प चुने (इस उदाहरण में दूसरा विकल्प)] तीन सही विकल्पों में से सिर्फ एक को चुनने पर
(पहला या तीसरा या चौथा विकल्प) +1 अंक मिलेंगे। कोई भी गलत विकल्प चुनने पर (इस उदाहरण में दूसरा विकल्प), –2
अंक मिलेंगे, चाहे सही विकल्प (विकल्पों) को चुना गया हो या न चुना गया हो।

FTS-20/46 0999DJA161101230010
Nurture Test Series/Joint Package Course/15-10-2023
Paragraph for Questions 5 and 6
प्रश्न 5 एवं 6 के लिये अनुच्छेद
Bond length is defined as the internuclear distance between the two atoms. When bond order is greater,
then the bond length is lesser. When double bond character increase, then bond length decreases and
vice versa.
बंध लम्बाई को, दो परमाणुओं के मध्य अन्तर नाभिकीय दूरी के रूप में परिभाषित किया जाता है। जब बंध क्रम अधिक है तो बंध
लम्बाई कम होती है। जब द्विबंध लक्षण बढ़ता है तो बंध लम्बाई घटती है तथा जब द्विबंध लक्षण घटता है तो बंध लम्बाई बढ़ती है।
5. Which of the following is correct about the bond length -
बंध लम्बाई के सन्दर्भ में निम्न में से कौनसा सही है :

(A) (a > b) (B) CO32– > HCOO – (for C – O)

(C) (a > b) (D) (a > b)

6. Incorrect order of the (C – N) bond lengths for the given compound is -


दिये गये यौगिक की (C – N) बंध लम्बाईयों का गलत क्रम है

(A) a > b > c > d (B) d > a > b > c (C) c > b > a > d (D) b > c > a > d

Space for Rough Work / कच्चे कार्य के लिए स्थान

0999DJA161101230010 FTS-21/46
Target : JEE (Main + Advanced) 2025/15-10-2023
Paragraph for Questions 7 and 8
प्रश्न 7 एवं 8 के लिये अनुच्छेद
Hyperconjugation involves overlapping of (filled) hybridised orbital (sp3 – s) with (empty) unhybridised
p orbital. More the number of hyperconjugating structures more will be the stability of the molecule.
Hyperconjugation is used to compare heat of combustion and heat of hydrogenation as number of
carbon atom increases heat of combustion increases and as the number of π bond increases heat of
hydrogenation increases. (also as stability increases value of heat of hydrogenation decreases)
अतिसंयुग्मन में (भरे हुए) संकरित कक्षक (sp3 – s) का (रिक्त) असंकरित p कक्षक के साथ अतिव्यापन सम्मिलित होता है।
अतिसंयुग्मित संरचनाओं की संख्या जितनी अधिक होगी अणु का स्थायित्व भी अधिक होगा। अतिसंयुग्मन का प्रयोग दहन की
उष्मा तथा हाइड्रोजनीकरण की उष्मा की तुलना करने में किया जाता है। जैसे-जैसे कार्बन परमाणुओं की संख्या बढ़ती है दहन की
उष्मा बढ़ती है। जैसे-जैसे π बंधो की संख्या बढ़ती है, हाइड्रोजनीकरण की उष्मा बढ़ती है। (स्थायित्व बढ़ने के साथ
हाइड्रोजनीकरण की उष्मा का मान घटता है)
7. Correctly arranged order of heat of combustion of the given compounds
दिये गये यौगिको की दहन की उष्मा का सही रूप से व्यवस्थित क्रम है :
(I) (II) (III) (IV)

(A) I > II > III > IV (B) III > IV > II > I
(C) IV > III > II > I (D) IV > III > I > II
8. Highest heat of hydrogenation value amongst the following compound is of :
निम्न में हाइड्रोजनीकरण की उष्मा का अधिकतम मान रखने वाला यौगिक है :

(A) (B) (C) (D)

Space for Rough Work / कच्चे कार्य के लिए स्थान

FTS-22/46 0999DJA161101230010
Nurture Test Series/Joint Package Course/15-10-2023
SECTION-I (iii) : (Maximum Marks: 6)
खण्ड-I (iii) : (अधिकतम अंक: 6)
This section contains TWO (02) questions.
Each question has matching lists. The codes for the lists have choices (A), (B), (C) and (D) out of
which ONLY ONE is correct
For each question, marks will be awarded in one of the following categories :
Full Marks : +3 If ONLY the correct option is chosen.
Zero Marks : 0 If none of the options is chosen (i.e. the question is unanswered)
Negative Marks : –1 In all other cases
इस खण्ड में दो (02) प्रश्न हैं
प्रत्येक प्रश्न में सुमेलन सूची है। सूचियों के लिए कोड के विकल्प (A), (B), (C) और (D) हैं जिनमें से के वल एक सही है।
प्रत्येक प्रश्न के लिए अंक निम्नलिखित परिस्थितियों में से किसी एक के अनुसार दिये जाएंगे :
पूर्ण अंक : +3 यदि के वल सही विकल्प को चुना गया है।
शून्य अंक : 0 यदि किसी भी विकल्प को नहीं चुना गया है (अर्थात् प्रश्न अनुत्तरित है)।
ऋण अंक : –1 अन्य सभी परिस्थितियों में।
9. List-I List-II

(P) (1) Aromatic

(Q) (2) Non aromatic

Unstable at room temperature because of


(R) (3)
antiaromatic character

(S) (4) Homocyclic

Space for Rough Work / रफ कार्य के लिए जगह

0999DJA161101230010 FTS-23/46
Target : JEE (Main + Advanced) 2025/15-10-2023

सूची-I सूची-II

(P) (1) ऐरोमैटिक

(Q) (2) नाॅन-ऐरोमैटिक

एंटीऐरोमैटिक लक्षण के कारण कमरे के ताप पर अस्थायी होता


(R) (3)
है।

(S) (4) समचक्रीय

(A) P → 2;Q → 3;R → 3;S → 4 (B) P → 1;Q → 2;R → 3;S → 1,4


(C) P → 1;Q → 3;R → 3;S → 1,4 (D) P → 1;Q → 2;R → 1;S → 3,4

Space for Rough Work / रफ कार्य के लिए जगह

FTS-24/46 0999DJA161101230010
Nurture Test Series/Joint Package Course/15-10-2023
10. Match the List :(Provided group is attached with benzene ring)
List-I List-II
(P) Group donate e – inductively but does not donate / withdraw by resonance (1) – OH
Group withdraw e – inductively but does not donate / withdraw by
(Q) (2) – NO2
resonance
(R) Group withdraw e – inductively & donate e – by resonance (3) – CH2 – CH3

(S) Group withdraw e – inductively & withdraw e – by resonance


+

(4) − N H3

सूची मिलान करें (उपलब्ध समूह बेंजीन वलय के साथ जुडे है।)
सूची-I सूची-II
समूह जो प्रेरणिक प्रभाव से e – दान करता हैै परन्तु अनुनाद के द्वारा दान/वापसी
(P) (1) – OH
(withdraw) नहीं करता है।
समूह जो प्रेरणिक प्रभाव से e – खींच लेता है। परन्तु अनुनाद के द्वारा दान/वापसी
(Q) (2) – NO2
(withdraw) नहीं करता है।
समूह जो प्रेरणिक प्रभाव से e – खींच (withdraw) लेता है। तथा अनुनाद द्वारा e – दान देता
(R) (3) – CH2 – CH3
है।
(S) समूह जो प्रेरणिक प्रभाव से e – खींच लेता है। तथा अनुनाद द्वारा भी e – खींच लेता है।
+

(4) − N H3

(A) P → 3;Q → 4;R → 1;S → 2 (B) P → 3;Q → 4;R → 2;S → 3


(C) P → 3;Q → 2;R → 1;S → 4 (D) P → 1;Q → 4;R → 3;S → 2

Space for Rough Work / कच्चे कार्य के लिए स्थान

0999DJA161101230010 FTS-25/46
Target : JEE (Main + Advanced) 2025/15-10-2023
SECTION-II : (Maximum Marks: 24)
खण्ड-II : (अधिकतम अंक: 24)
This section contains SIX (06) questions. The answer to each question is a NUMERICAL VALUE.
For each question, enter the correct numerical value of the answer in the place designated to enter the
answer. If the numerical value has more than two decimal places, truncate/round-off the value to
Two decimal places; e.g. 6.25, 7.00, –0.33, –.30, 30.27, –127.30, if answer is 11.36777..... then both
11.36 and 11.37 will be correct)
Answer to each question will be evaluated according to the following marking scheme:
Full Marks : +4 If ONLY the correct numerical value is entered.
Zero Marks : 0 In all other cases.
इस खंड में छः (06) प्रश्न हैं। प्रत्येक प्रश्न का उत्तर एक संख्यात्मक मान (NUMERICAL VALUE) है।
प्रत्येक प्रश्न के उत्तर के सही संख्यात्मक मान (दशमलव अंकन में, दशमलव के द्वितीय स्थान तक रूण्डित/निकटित; उदाहरण
6.25, 7.00, –0.33, –.30, 30.27, –127.30, यदि उत्तर 11.36777..... है, तो 11.36 और 11.37 दोनों सही होगें)
प्रत्येक प्रश्न के उत्तर का मूल्यांकन निम्न अंकन योजना के अनुसार होगा
पूर्ण अंक : +4 यदि सिर्फ सही संख्यात्मक मान (Numerical value) ही उत्तर स्वरूप दर्ज किया गया है।
शून्य अंक : 0 अन्य सभी परिस्थितियों में।
1. How many of the following are soluble in aq.NaHCO3
निम्न में से कितने यौगिक जलीय NaHCO3 में विलेयशील है।

(a) (b) (c) (d)

(e) (f) (g) (h)

Space for Rough Work / कच्चे कार्य के लिए स्थान

FTS-26/46 0999DJA161101230010
Nurture Test Series/Joint Package Course/15-10-2023
2. Identify aromatic compound ?
ऐरोमैटिक यौगिक की संख्या बताइये ?

, , , ,

, , ,

3.

Which hydrogen is most acidic in above structure?


उपरोक्त संरचना में कौनसा हाइड्रोजन सर्वाधिक अम्लीय है ?

Space for Rough Work / कच्चे कार्य के लिए स्थान

0999DJA161101230010 FTS-27/46
Target : JEE (Main + Advanced) 2025/15-10-2023
4. How many groups attached with benzene ring can show +M effect :
बेंजीन वलय से जुड़े हुए कितने समूह +M प्रभाव दर्शाते हैंः

, , , , ,

5. X = Number of π electrons present in the compound 'P' :


Y = Number of π electrons involve in conjugation in compound 'P' :
Then value of (X – Y) is :
X = यौगिक 'P' में उपस्थित π इलेक्ट्राॅन की संख्या
Y = यौगिक 'P' के संयुग्मन में सम्मिलित π इलेक्ट्राॅन की संख्या तो (X – Y) का मान क्या है ?

6. Find total number of resonating structure of "P" involving mono-anion :


"P" की एकल ऋणायन युक्त अनुनादी संरचना की कु ल संख्या बताईये :

NaOH
−−−−→ (P)

Space for Rough Work / कच्चे कार्य के लिए स्थान

Note : No questions have been asked in the section III of this paper. Please leave section III
blank on the OMR answer sheet.

FTS-28/46 0999DJA161101230010
Nurture Test Series/Joint Package Course/15-10-2023
SECTION-IV : (Maximum Marks: 16)
खण्ड-IV : (अधिकतम अंक: 16)
This section contains TWO (02) questions.
Each question contains two columns, Column-I and Column-II.
Column-I has four entries (A), (B), (C) and (D)
Column-II has five entries (P), (Q), (R), (S) and (T)
Match the entries in Column-I with the entries in Column-II.
One or more entries in Column-I may match with one or more entries in Column-II.
For each entry in Column-I, darken the options of all the matching entries. For example, if entry (A) in
Column-I matches with entries (Q), (R) and (T), then chosen these three options. Similarly, for entries
(B), (C) and (D).
For each question, marks will be awarded in one of the following categories :
For each entry in Column-I
Full Marks : +2 If only the option(s) corresponding to all the correct match(es) is (are) chosen
Zero Marks : 0 In all other cases
इस खण्ड में दो (02) प्रश्न हैं
प्रत्येक प्रश्न में दो काॅलम हैं, काॅलम-I तथा काॅलम-II
काॅलम-I में चार प्रविष्टयाँ (A), (B), (C) तथा (D) हैं
काॅलम-II में पाँच प्रविष्टियाँ (P), (Q), (R), (S) तथा (T) हैं
काॅलम-I की प्रविष्टियों का काॅलम-II की प्रविष्टियों से सुमेलित करें
काॅलम-I की एक या एक से अधिक प्रविष्टियाँ, काॅलम-II की एक या एक से अधिक प्रविष्टियों से सुमेलित हो सकती हैं
काॅलम-I की प्रत्येक प्रविष्टि के लिए सभी सुमेलित प्रविष्टियों के विकल्पों को चुनें। उदाहरण स्वरूप, यदि काॅलम-I की प्रविष्टि
(A) प्रविष्टियों (Q), (R) तथा (T) से सुमेलित हो, तो इन तीनों विकल्पों को चुनें। इसी प्रकार प्रविष्टियों (B), (C) तथा (D) के
लिये भी करें
अंकन योजना :
काॅलम-I की प्रत्येक प्रविष्टि के लिए
पूर्ण अंक : +2 यदि के वल (सारे) सही विकल्प (विकल्पों) को चुना गया है।
शून्य अंक : 0 अन्य सभी अवस्थाओं में

0999DJA161101230010 FTS-29/46
Target : JEE (Main + Advanced) 2025/15-10-2023
1. Column-I Column-II
(species) (number of α H)

(A) (P) 7

(B) (Q) 4

(C) (R) 3

(D) (S) 1

(T) 2

काॅलम-I काॅलम-II
(स्पीशीज) ( α H की संख्या)

(A) (P) 7

(B) (Q) 4

(C) (R) 3

(D) (S) 1

(T) 2

Space for Rough Work / कच्चे कार्य के लिए स्थान

FTS-30/46 0999DJA161101230010
Nurture Test Series/Joint Package Course/15-10-2023
2. Match the column
Column-I Column-II
(Compounds) (Properties)

(A) (P) Aromatic

(B) (Q) Conjugate base is aromatic

(C) (R) Most acidic hydrogen in column-I

(D) (S) Most basic compound in column-I

(T) Non-aromatic
काॅलम सुमेलित करे
काॅलम-I काॅलम-II
(यौगिक) (गुणधर्म)

(A) (P) ऐरोमेटिक

(B) (Q) संयुग्मी क्षार ऐरोमेटिक है

(C) (R) काॅलम-I में सर्वाधिक अम्लीय हाइड्रोजन

(D) (S) काॅलम-I में सर्वाधिक क्षारीय यौगिक

(T) नाॅन-ऐरोमेटिक

Space for Rough Work / कच्चे कार्य के लिए स्थान

0999DJA161101230010 FTS-31/46
Target : JEE (Main + Advanced) 2025/15-10-2023
PART-3 : MATHEMATICS
भाग-3 : गणित
SECTION-I (i) : (Maximum Marks: 12)
खण्ड-I (i) : (अधिकतम अंक: 12)
This section contains FOUR (04) questions.
Each question has FOUR options (A), (B), (C) and (D). ONLY ONE of these four options is the
correct answer.
For each question, choose the option corresponding to the correct answer.
Answer to each question will be evaluated according to the following marking scheme :
Full Marks : +3 If ONLY the correct option is chosen.
Zero Marks : 0 If none of the options is chosen (i.e. the question is unanswered)
Negative Marks : –1 In all other cases
इस खण्ड में चार (04) प्रश्न हैं
प्रत्येक प्रश्न में चार उत्तर विकल्प (A), (B), (C) और (D) हैं। जिनमें के वल एक ही सही हैं।
प्रत्येक प्रश्न के लिए सही उत्तर विकल्प के अनुरूप विकल्प को चुनें।
प्रत्येक प्रश्न के लिए अंक निम्नलिखित परिस्थितियों में से किसी एक के अनुसार दिये जाएंगेः
पूर्ण अंक : +3 यदि सिर्फ सही विकल्प को चुना गया है।
शून्य अंक : 0 यदि किसी भी विकल्प को नहीं चुना गया है
ऋण अंक : –1 अन्य सभी परिस्थितियों में।
1. If the line y = x and x + y = 0 are tangents to a variable circle, then locus of the centre of the variable
circle, is
यदि रेखा y = x तथा x + y = 0, एक चर वृत्त की स्पर्श रेखायें हो, तो चर वृत्त के के न्द्र का बिन्दुपथ होगा -
(A) xy = 0 (B) x + 2y = 0
(C) 2x + 3y = 5 (D) 2x – 3y = 5

Space for Rough Work / कच्चे कार्य के लिए स्थान

FTS-32/46 0999DJA161101230010
Nurture Test Series/Joint Package Course/15-10-2023
2. Consider a square OACB with side length a, where O is origin and sides OA and OB are along positive x
& positive y axis respectively. A circle having radius r (where r < a), touches sides OA, OB and passes
through C, then -
माना वर्ग OACB जिसकी भुजा की लम्बाई a है। जहाँ O मूलबिन्दु तथा भुजाऐं OA तथा OB क्रमशः धनात्मक x तथा धनात्मक y अक्ष
के अनुदिश हैं। एक वृत्त जिसकी त्रिज्या r (जहाँ r < a) है, भुजा OA एवं OB को स्पर्श करती है तथा C से गुजरती हो, तब -
(A) r2 – 3ar + a2 = 0 (B) r2 – 4ar + 2a2 = 0
(C) r2 + 3ar – a2 = 0 (D) 2r2 – ar + a2
=0
14
3. Complete set of values of m, for which point (m, 1) lies in smaller segment formed by circle
x2 + y2 – 3x + 1 = 0 and line 2x – y = 2 is
m के मानों का पूर्ण समुच्चय, जिसके लिये बिन्दु (m, 1) वृत्त x2 + y2 – 3x + 1 = 0 तथा रेखा 2x – y = 2 द्वारा निर्मित छोटे
रेखाखण्ड पर स्थित हो, होगा
3 3
(A) (1, 2) (B) ( , 2) (C) ( 1, ) (D) (2, ∞ )
2 2
4. If the point (a, 2a) lies inside the circle x2 + y2 – 20 = 0, then number of possible integral values of a is -
यदि बिन्दु (a, 2a), वृत्त x2 + y2 – 20 = 0 के अन्दर स्थित हो, तो a के सम्भव पूर्णांक मानों की संख्या होगी -
(A) 2 (B) 4 (C) 3 (D) 8
Space for Rough Work / कच्चे कार्य के लिए स्थान

0999DJA161101230010 FTS-33/46
Target : JEE (Main + Advanced) 2025/15-10-2023
SECTION-I (ii) : (Maximum Marks: 16)
खण्ड-I (ii) : (अधिकतम अंक: 16)
This section contains FOUR (04) questions.
This section contains TWO paragraphs.
Based on each paragraph, there are TWO questions
Each question has Four options (A), (B), (C) and (D) ONE OR MORE THAN ONE of these four
option(s) is(are) correct.
For each question, choose the option(s) corresponding to (all ) the correct answer(s)
Answer to each question will be evaluated according to the following marking scheme:
Full Marks : +4 If only (all) the correct option(s) is (are) chosen.
Partial Marks : +3 If all the four options are correct but ONLY three options are chosen.
Partial Marks : +2 If three or more options are correct but ONLY two options are chosen,
both of which are correct options.
Partial Marks : +1 If two or more options are correct but ONLY one option is chosen and it is
a correct option.
Zero Marks : 0 If none of the options is chosen (i.e. the question is unanswered).
Negative Marks : –2 In all other cases.
For Example : If first, third and fourth are the ONLY three correct options for a question with second
option being an incorrect option; selecting only all the three correct options will result in +4 marks.
Selecting only two of the three correct options (e.g. the first and fourth options), without selecting
any incorrect option (second option in this case), will result in +2 marks. Selecting only one of the
three correct options (either first or third or fourth option), without selecting any incorrect option
(second option in this case), will result in +1 marks. Selecting any incorrect option(s) (second option
in this case), with or without selection of any correct option(s) will result in –2 marks.
इस खण्ड में चार (04) प्रश्न हैं
इस खण्ड में दो अनुच्छेद हैं
प्रत्येक अनुच्छेद पर दो प्रश्न दिए गयें हैं।
प्रत्येक प्रश्न में चार विकल्प (A), (B), (C) और (D) हैं जिनमें से एक या एक से अधिक विकल्प सही हैं।
प्रत्येक प्रश्न के लिए, प्रश्न का (के ) उत्तर देने हेतु सही विकल्प (विकल्पों) को चुने।
प्रत्येक प्रश्न के उत्तर का मूल्यांकन निम्न अंकन योजना के अनुसार होगा :
पूर्ण अंक : +4 यदि के वल (सारे) सही विकल्प (विकल्पों) को चुना गया है।
आंशिक अंक : +3 यदि चारों विकल्प सही हैं परन्तु के वल तीन विकल्पों को चुना गया है।
आंशिक अंक : +2 यदि तीन या तीन से अधिक विकल्प सही हैं परन्तु के वल दो विकल्पों को चुना गया है और चुने हुए
दोनों विकल्प सही विकल्प हैं।
आंशिक अंक : +1 यदि दो या दो से अधिक विकल्प सही हैं परन्तु के वल एक विकल्प को चुना गया है और चुना हुआ
विकल्प सही विकल्प हैं।
शून्य अंक : 0 यदि किसी भी विकल्प को नहीं चुना गया है (अर्थात् प्रश्न अनुत्तरित है)।
ऋण अंक : –2 अन्य सभी परिस्थितियों में।
उदाहरण स्वरूप : यदि किसी प्रश्न के लिए के वल पहला, तीसरा एवं चौथा सही विकल्प हैं और दूसरा विकल्प गलत है; तो
के वल सभी तीन सही विकल्पों का चयन करने पर ही +4 अंक मिलेंगें। बिना कोई गलत विकल्प चुने
(इस उदाहरण में दूसरा विकल्प) तीन सही विकल्पों में से सिर्फ दो को चुनने पर (उदाहरणतः पहला तथा चौथा विकल्प) +2
अंक मिलेंगे। बिना कोई गलत विकल्प चुने (इस उदाहरण में दूसरा विकल्प)] तीन सही विकल्पों में से सिर्फ एक को चुनने पर
(पहला या तीसरा या चौथा विकल्प) +1 अंक मिलेंगे। कोई भी गलत विकल्प चुनने पर (इस उदाहरण में दूसरा विकल्प), –2
अंक मिलेंगे, चाहे सही विकल्प (विकल्पों) को चुना गया हो या न चुना गया हो।

FTS-34/46 0999DJA161101230010
Nurture Test Series/Joint Package Course/15-10-2023
Paragraph for Questions 5 and 6
प्रश्न 5 एवं 6 के लिये अनुच्छेद
24
Given two circles intersecting orthogonally having the length of common chord unit. The radius of
5
one of the circle is 3 units.
24
दिये गये दो वृत्त लम्बकोणीय काटते है जिनकी उभयनिष्ठ जीवा इकाई है। एक वृत्त की त्रिज्या 3 इकाई है।
5
5. If radius of other circle is 'x' unit then x is less than or equal to
यदि अन्य वृत्त की त्रिज्या 'x' इकाई है, तो x का मान निम्न से कम या बराबर होगा
(A) 2 (B) 4 (C) 5 (D) 6
6. If angle between direct common tangent is 2 θ then sin(2 θ ) is greater than or equal to
यदि बाह्य उभयनिष्ठ स्पर्श रेखा 2 θ है, तो sin(2 θ ) का मान निम्न से अधिक या बराबर होगा
4 4 √6 12 24
(A) (B) (C) (D)
25 25 25 25

Space for Rough Work / कच्चे कार्य के लिए स्थान

0999DJA161101230010 FTS-35/46
Target : JEE (Main + Advanced) 2025/15-10-2023
Paragraph for Questions 7 and 8
प्रश्न 7 एवं 8 के लिये अनुच्छेद
If α -chord of a circle be that chord which subtends an angle α at the centre of the circle.
यदि वृत्त α -जीवा, जो वृत्त के के न्द्र पर α कोण बनाती है।
7. If x + y = 1 is α -chord of x2 + y2 = 1, then α is less than or equal to
यदि x + y = 1, वृत्त x2 + y2 = 1 α -जीवा है, तो α का मान निम्न से कम या बराबर है
(A) π (B) π (C) π (D) 3 π
6 4 2 4
8. Distance of 2 π -chord of x2 + y2 + 2x + 4y + 1 = 0 from the centre is greater than or equal to
3

के न्द्र x2 + y2 + 2x + 4y + 1 = 0 की 2 π -जीवा की दूरी निम्न से अधिक या बराबर होगी


3
1
(A) (B) 1 (C) √ 2 (D) 2
√ 2

Space for Rough Work / कच्चे कार्य के लिए स्थान

FTS-36/46 0999DJA161101230010
Nurture Test Series/Joint Package Course/15-10-2023
SECTION-I (iii) : (Maximum Marks: 6)
खण्ड-I (iii) : (अधिकतम अंक: 6)
This section contains TWO (02) questions.
Each question has matching lists. The codes for the lists have choices (A), (B), (C) and (D) out of
which ONLY ONE is correct
For each question, marks will be awarded in one of the following categories :
Full Marks : +3 If ONLY the correct option is chosen.
Zero Marks : 0 If none of the options is chosen (i.e. the question is unanswered)
Negative Marks : –1 In all other cases
इस खण्ड में दो (02) प्रश्न हैं
प्रत्येक प्रश्न में सुमेलन सूची है। सूचियों के लिए कोड के विकल्प (A), (B), (C) और (D) हैं जिनमें से के वल एक सही है।
प्रत्येक प्रश्न के लिए अंक निम्नलिखित परिस्थितियों में से किसी एक के अनुसार दिये जाएंगे :
पूर्ण अंक : +3 यदि के वल सही विकल्प को चुना गया है।
शून्य अंक : 0 यदि किसी भी विकल्प को नहीं चुना गया है (अर्थात् प्रश्न अनुत्तरित है)।
ऋण अंक : –1 अन्य सभी परिस्थितियों में।
9. For the circles x2 + y2 = 4 and x2 + y2 – 16x – 16y + 127 = 0.
Match List-I with List-II and select the correct answer using the code given below the list.
List-I List-II
(P) Length of direct common tangent is less than (1) √ 128

(Q) Length of transverse common tangent is (2) √ 119

(R) Point of intersection of direct common tangents is (3) (16, 16)


16 16
(S) Point of intersection of transverse common tangent is (4) ( , )
3 3

वृत्तो x2 + y2 = 4 तथा x2 + y2 – 16x – 16y + 127 = 0 के लिए


सूची-I को सूची-II से सुमेलित कीजिए तथा सूचियों के नीचे दिए नए कोड का प्रयोग करके सही उत्तर चुनिये :
सूची-I सूची-II
(P) उभयनिष्ठ अनु स्पर्श रेखा की लम्बाई --------- से कम होगी (1) √ 128

(Q) उभयनिष्ठ तिर्यक स्पर्श रेखा की लम्बाई होगी (2) √ 119

(R) उभयनिष्ठ अनु स्पर्श रेखा का प्रतिच्छेद बिन्दु होगा (3) (16, 16)
16 16
(S) उभयनिष्ठ तिर्यक स्पर्श रेखा का प्रतिच्छेद बिन्दु होगा (4) ( , )
3 3

(A) P → 1;Q → 2;R → 4;S → 3 (B) P → 1;Q → 2;R → 3;S → 4


(C) P → 3;Q → 2;R → 1;S → 4 (D) P → 1;Q → 3;R → 2;S → 4
Space for Rough Work / कच्चे कार्य के लिए स्थान

0999DJA161101230010 FTS-37/46
Target : JEE (Main + Advanced) 2025/15-10-2023
10. Let S1 and S2 are two unit circles with centre at C1(0,0) and C2(1,0) respectively. Let S3 is another circle
of unit radius, passes through C1 and C2 and its centre is above the x-axis. The equation of common
tangent to S1 and S3 which does not pass through S2 is ax + by + 2 = 0.
Match List-I with List-II and select the correct answer using the code given below the list.
List-I List-II
(P) The ordinate of centre of circle S3 is (1) 1
2
(Q) The value of a is equal to (2) √ 3
2
(R) The value of (a2 – b) is equal to (3) √ 3

(S) The abscissa of centre of circle S3 is (4) 4


माना S1 तथा S2 दो इकाई वृत्त है जिनके के न्द्र क्रमशः बिन्दु C1(0,0) तथा बिन्दु C2(1,0) है। माना इकाई त्रिज्या का अन्य वृत S3,
C1 तथा C2 से गुजरता है एवं इसका के न्द्र x-अक्ष के ऊपर की ओर है। S1 तथा S3 के लिये उभयनिष्ठ स्पर्श रेखा का समीकरण, जो
S2 से नहीं गुजरती है, ax + by + 2 = 0 हैं।
सूची-I को सूची-II से सुमेलित कीजिए तथा सूचियों के नीचे दिए नए कोड का प्रयोग करके सही उत्तर चुनिये :
सूची-I सूची-II
(P) वृत्त S3 के के न्द्र की कोटि होगी। (1) 1
2
(Q) a का मान होगा (2) √ 3
2
(R) (a2 – b) का मान होगा (3) √3

(S) वृत्त S3 के के न्द्र का भुज होगा (4) 4


(A) P → 2;Q → 3;R → 4;S → 1 (B) P → 2;Q → 3;R → 1;S → 4
(C) P → 3;Q → 2;R → 4;S → 1 (D) P → 3;Q → 2;R → 1;S → 4
Space for Rough Work / कच्चे कार्य के लिए स्थान

FTS-38/46 0999DJA161101230010
Nurture Test Series/Joint Package Course/15-10-2023
SECTION-II : (Maximum Marks: 24)
खण्ड-II : (अधिकतम अंक: 24)
This section contains SIX (06) questions. The answer to each question is a NUMERICAL VALUE.
For each question, enter the correct numerical value of the answer in the place designated to enter the
answer. If the numerical value has more than two decimal places, truncate/round-off the value to
Two decimal places; e.g. 6.25, 7.00, –0.33, –.30, 30.27, –127.30, if answer is 11.36777..... then both
11.36 and 11.37 will be correct)
Answer to each question will be evaluated according to the following marking scheme:
Full Marks : +4 If ONLY the correct numerical value is entered.
Zero Marks : 0 In all other cases.
इस खंड में छः (06) प्रश्न हैं। प्रत्येक प्रश्न का उत्तर एक संख्यात्मक मान (NUMERICAL VALUE) है।
प्रत्येक प्रश्न के उत्तर के सही संख्यात्मक मान (दशमलव अंकन में, दशमलव के द्वितीय स्थान तक रूण्डित/निकटित; उदाहरण
6.25, 7.00, –0.33, –.30, 30.27, –127.30, यदि उत्तर 11.36777..... है, तो 11.36 और 11.37 दोनों सही होगें)
प्रत्येक प्रश्न के उत्तर का मूल्यांकन निम्न अंकन योजना के अनुसार होगा
पूर्ण अंक : +4 यदि सिर्फ सही संख्यात्मक मान (Numerical value) ही उत्तर स्वरूप दर्ज किया गया है।
शून्य अंक : 0 अन्य सभी परिस्थितियों में।
1. Let two circles are passing through a fixed point (a,b) in first quadrant. Both the circles touch coordinate
axis. It is given that radius of one circle is double of the other. If a = α ± β ( α , β ∈ N) then value of

b
α 2 – β is equal to

माना दो वृत्त प्रथम चतुर्थांश में निम्य बिन्दु (a,b) से गुजरते है। दोनों वृत्त निर्देशी अक्षो को स्पर्श करते है। यह दिया गया है कि एक
वृत्त की त्रिज्या, दूसरे से दुगुनी है। यदि a = α ± β ( α , β ∈ N) हो, तो α 2 – β का मान है

b
2. If xy – 2x – 3y + 6 = 0 are pair of normals to a circle which intersects the circle x2 + y2 – 2x – 2y – 2 = 0
orthogonally and having radius r, then r is equal to
4
यदि वृत्त के अभिलम्बों का युग्म xy – 2x – 3y + 6 = 0 है जो वृत्त x2 + y2 – 2x – 2y – 2 = 0 को लम्बकोणीय प्रतिच्छेद
करता है जिसकी त्रिज्या r हो, तो r का मान होगा
4

Space for Rough Work / कच्चे कार्य के लिए स्थान

0999DJA161101230010 FTS-39/46
Target : JEE (Main + Advanced) 2025/15-10-2023
3. From the origin, chords are drawn to the circle (x – 1)2 + y2 = 1. The equation of the locus of the
midpoints of these chords is x2 + y2 – λ x = 0, then the value of λ is :
मूलबिन्दु से वृत्त (x – 1)2 + y2 = 1 पर जीवा खींची गई है। इन जीवाओं के मध्य बिन्दुओं के बिन्दुपथ का समीकरण
x2 + y2 – λ x = 0 हो, तो λ का मान होगा
4. Let two circles are passing through a fixed point (x1, y1) where x1 > 0, y1 > 0 and both circle touch coordinate
2
axes. If sum of their radii is equal to product of their radii, then (x1 + y1 ) − is equal to
1 1
( + )
x1 y1

माना दो वृत्त, एक नियत बिन्दु (x1, y1) जहाँ x1 > 0, y1 > 0 से गुजरते है तथा दोनों वृत्त निर्देशी अक्षों को स्पर्श करते हैं। यदि
2
इनकी त्रिज्याओं का योगफल, इनकी त्रिज्याओं के गुणनफल के बराबर हो, तो (x1 + y1 ) − का मान होगा
1 1
( + )
x1 y1

Space for Rough Work / कच्चे कार्य के लिए स्थान

FTS-40/46 0999DJA161101230010
Nurture Test Series/Joint Package Course/15-10-2023
5. A line passing through the point P(2, 1) intersects the circle x2 + y2 – 2x + 4y – 1 = 0 in the points A
and B. then AP.BP =
बिन्दु P(2, 1) से गुजरने वाली रेखा वृत x2 + y2 – 2x + 4y – 1 = 0 को बिन्दुओ A तथा B पर काटती है तो AP.BP =
6. There are two circles possible, which intersect the circles x2 + y2 – 2x – 4 = 0 and x2 + y2 + 4x – 4 = 0
orthogonally and the line x – y + 8 = 0 is tangent to them. The distance between centers of these circles
is 4 b, then b/4 is equal to :

दो सम्भव वृत्त, जो वृत्तों x2 + y2 – 2x – 4 = 0 तथा x2 + y2 + 4x – 4 = 0 को लम्बकोणीय काटते है तथा रेखा x – y + 8 = 0


इनकी स्पर्श रेखा है। इन वृत्तों के के न्द्रों के मध्य दूरी 4 b हो, तो b/4 का मान होगा :

Space for Rough Work / रफ कार्य के लिए जगह

Note : No questions have been asked in the section III of this paper. Please leave section III
blank on the OMR answer sheet.

0999DJA161101230010 FTS-41/46
Target : JEE (Main + Advanced) 2025/15-10-2023
SECTION-IV : (Maximum Marks: 16)
खण्ड-IV : (अधिकतम अंक: 16)
This section contains TWO (02) questions.
Each question contains two columns, Column-I and Column-II.
Column-I has four entries (A), (B), (C) and (D)
Column-II has five entries (P), (Q), (R), (S) and (T)
Match the entries in Column-I with the entries in Column-II.
One or more entries in Column-I may match with one or more entries in Column-II.
For each entry in Column-I, darken the options of all the matching entries. For example, if entry (A) in
Column-I matches with entries (Q), (R) and (T), then chosen these three options. Similarly, for entries
(B), (C) and (D).
For each question, marks will be awarded in one of the following categories :
For each entry in Column-I
Full Marks : +2 If only the option(s) corresponding to all the correct match(es) is (are) chosen
Zero Marks : 0 In all other cases
इस खण्ड में दो (02) प्रश्न हैं
प्रत्येक प्रश्न में दो काॅलम हैं, काॅलम-I तथा काॅलम-II
काॅलम-I में चार प्रविष्टयाँ (A), (B), (C) तथा (D) हैं
काॅलम-II में पाँच प्रविष्टियाँ (P), (Q), (R), (S) तथा (T) हैं
काॅलम-I की प्रविष्टियों का काॅलम-II की प्रविष्टियों से सुमेलित करें
काॅलम-I की एक या एक से अधिक प्रविष्टियाँ, काॅलम-II की एक या एक से अधिक प्रविष्टियों से सुमेलित हो सकती हैं
काॅलम-I की प्रत्येक प्रविष्टि के लिए सभी सुमेलित प्रविष्टियों के विकल्पों को चुनें। उदाहरण स्वरूप, यदि काॅलम-I की प्रविष्टि
(A) प्रविष्टियों (Q), (R) तथा (T) से सुमेलित हो, तो इन तीनों विकल्पों को चुनें। इसी प्रकार प्रविष्टियों (B), (C) तथा (D) के
लिये भी करें
अंकन योजना :
काॅलम-I की प्रत्येक प्रविष्टि के लिए
पूर्ण अंक : +2 यदि के वल (सारे) सही विकल्प (विकल्पों) को चुना गया है।
शून्य अंक : 0 अन्य सभी अवस्थाओं में

FTS-42/46 0999DJA161101230010
Nurture Test Series/Joint Package Course/15-10-2023
1. Consider a circles S1 : x2 + y2 – 4x – 6y + 12 = 0 and S2 : (x – 5)2 + (y – 6)2 = r2 > 1
Column-I Column-II
(A) S1 and S2 touch internally, then (r – 1)2 is divisible by (P) 3
(B) S1 and S2 touch externally, then r2 + 2r + 3 is divisible by (Q) 4
(C) S1 and S2 intersect orthogonally, then r2 – 1 is divisible by (R) 5
S1 and S2 intersect so that the common chord is longest, then r2 + 5 is
(D) (S) 6
divisible by
(T) 9
माना वृत्त S1 : x2 + y2 – 4x – 6y + 12 = 0 तथा S2 : (x – 5)2 + (y – 6)2 = r2 > 1 है
काॅलम-I काॅलम-II
(A) S1 तथा S2 अंतः स्पर्श करते है, तो (r – 1)2 निम्न से विभजित है (P) 3
(B) S1 तथा S2 बाह्य स्पर्श करते है, तो r2 + 2r + 3 निम्न से विभाजित है (Q) 4
(C) S1 तथा S2 लम्बकोणीय काटते है, तो r2 – 1 निम्न से विभाजित है (R) 5
S1 तथा S2 इस प्रकार प्रतिच्छेद करते है कि उभ्यनिष्ठ जीवा सबसे लम्बी हो, तो r2 + 5 निम्न से
(D) (S) 6
विभाजित है
(T) 9

Space for Rough Work / कच्चे कार्य के लिए स्थान

0999DJA161101230010 FTS-43/46
Target : JEE (Main + Advanced) 2025/15-10-2023
2. Consider the circles C1 of radius a and C2 of radius b, b > a both lying the first quadrant and touching the
coordinate axes.
Column-I Column-II
b
C1 and C2 touch each other and = λ + √μ, λ ∈ prime number and µ ∈ whole
(A) a (P) 8
number then ( λ + µ) is
b
C1 and C2 cut orthogonally and = λ + √μ, λ ∈ prime number and µ ∈ whole
(B) a (Q) 1
number then | λ – µ| is
b
C1 and C2 intersect so that the common chord is longest and = λ + √μ, λ ∈ prime
(C) a (R) 5
number and µ ∈ whole number then (µ2 + λ ) is
b
C2 passes through the centre of C1 and = λ + √μ, λ ∈ prime number and µ ∈ whole
(D) a (S) 11
number, then λ 2 + µ2 is
(T) 3
माना a त्रिज्या का वृत्त C1 तथा b त्रिज्या का वृत्त C2, b > a है, दोनों वृत्त प्रथम चतुर्थांश में स्थित है तथा निर्देशी अक्षों को स्पर्श करता है
काॅलम-I काॅलम-II
b
C1 तथा C2 लम्बकोणीय काटते है तथा = λ + √μ, λ ∈ अभाज्य संख्या तथा µ ∈ पूर्ण संख्या है,
(A) a (P) 8
तो ( λ + µ) है
b
C1 तथा C2 लम्बकोणीय काटते है तथा = λ + √μ, λ ∈ अभाज्य संख्या तथा µ ∈ पूर्ण संख्या है,
(B) a (Q) 1
तो | λ – µ| है
b
C1 तथा C2 इस प्रकार काटते है कि उभयनिष्ठ जीवा सबसे लम्बी हो तथा = λ + √μ, λ ∈ अभाज्य
(C) a (R) 5
संख्या तथा µ ∈ पूर्ण संख्या हो, तो (µ2 + λ ) है
b
C2, C1 के के न्द्र से गुजरता है तथा = λ + √μ, λ ∈ अभाज्य संख्या तथा µ ∈ पूर्ण संख्या है, तो
(D) a (S) 11
λ 2 + µ2 है
(T) 3

Space for Rough Work / कच्चे कार्य के लिए स्थान

FTS-44/46 0999DJA161101230010
Nurture Test Series/Joint Package Course/15-10-2023
ALLEN®
Space for Rough Work / dPps dk;Z ds fy, LFkku

0999DJA161101230010 FTS-45/46
Target : JEE (Main + Advanced) 2025/15-10-2023
ALLEN®
NAME OF THE CANDIDATE / ijh{kkFkhZ dk uke .............................................................................
FORM NO. / QkWeZ uEcj .............................................
I have read all the instructions I have verified the identity, name and Form
and shall abide by them. number of the candidate, and that question
eSa u s lHkh funs Z ' kks a dks i<+ fy;k gS vkSj eS mudk paper and ORS codes are the same.
vo'; ikyu d:¡ xk@d:¡xhA eSa u s ijh{kkFkhZ dk ifjp;] uke vkSj QkW eZ uEcj dks iw j h rjg
tk¡p fy;k gS ,oa iz'u i= vkSj vks- vkj- ,l- dksM nksuksa leku gSaA
____________________________ ____________________________
Signature of the Candidate / ijh{kkFkhZ ds gLrk{kj Signature of the Invigilator / fujh{kd ds gLrk{kj

Space for Rough Work / dPps dk;Z ds fy, LFkku

ALLEN CAREER INSTITUTE Pvt. Ltd.


Registered & Corporate Office : ‘SANKALP’, CP-6, Indra Vihar, Kota (Rajasthan) INDIA-324005
Ph. : +91-744-3556677, +91-744-2757575|E-mail : dlp@allen.in|Website : www.dlp.allen.ac.in, dsat.allen.ac.in
FTS-46/46 Your Hard Work Leads to Strong Foundation 0999DJA161101230010
Distance Learning Programmes
(Session-2023-24)
ALL INDIA TEST SERIES

ABOUT FEEDBACK SYSTEM


Dear Student,
We request you to provide feedback for the test series till you have appeared. Kindly answer the questions
provided on the reverse of paper with honesty and sincerely.
Although our test series questions are extremely well designed and are able to improve speed, accuracy &
developing examination temperament, yet we are always open to improvements.
If you have not prepared well for today's test and if you are not feeling good today, then do not blame test
series for it.
We strive to prepare you for all kinds of situations and facing variations in paper, as this can also happen in
Main exam. It is important for you to concentrate on your rank.
Go through the feedback form thoroughly and answer with complete loyalty. Darken your response (2, 1, 0) in
OMR sheet corresponding to :

Questions
1. Any problem in subscription of test series:
[2] Not at all [1] Some time [0] Problem faced
2. Test paper start on time:
[2] As per schedule [1] Some time deviate from schedule [0] Always delay
3. Test paper timing :
[2] Comfortable [1] Average [0] Need to be change
4. Location of test center:
[2] Good and approachable [1] Average in terms of approach [0] difficult to reach
5. Are you satisfy with result analysis :
[2] Outstanding [1] Average [0] Below average
6. The level of test paper [meet all the requirement of competitive examination]
[2] Outstanding [1] Average [0] Below average
7. Number of mistake in test papers
[2] Negligible [1] Are very less [0] Maximum
8. Do you think our test series is able to improve speed, accuracy & developing examination temperament?
[2] Yes [1] Partly [0] Not at all
9. Response from ALLEN on email / telephonically
[2] Always good and prompt [1] Some time delay [0] Not satisfactory
10. Response on test center
[2] Satisfactory [1] Partly Satisfactory [0] Not good

You might also like