Professional Documents
Culture Documents
Name of Work:Providing comprehensive Underground Sewerage Scheme to Okkium Thoraipakkam (Dn.193, 194 & 195), Area XV (Sholinganallur) in Chen
Name of the
Bidder/
Bidding Firm /
Company :
PRICE SCHEDULE
(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is lia
only )
1 2 4 5 13 14
1 Bill No:1 Providing Collection system, Pumping Main, Silt raiser
arrangements ,Pipes & Specials and allied works
2 Supply, delivery, laying and jointing of Double wall corrugated /
structured wall plastic polyethylene / polypropylene pipes DWC PE or
PP of class SN-8 with non-smooth external Annular Corrugated and
Smooth Internal Surfaces in Standard lengths with online coupler and
spigot type confirming to IS 16098 (Part-2) 2013 / EN: 13476-3 (latest
revision) including elastomeric sealing ring gasket suitable for DWC PE
or PP pipes conforming to IS: 5382 (latest revision), freight,insurance,
loading into the truck and transporting to the stores / site.. etc
including earth work excavation in hard stiff clay,stiff black cotton,hard
red earth, shales, muram, gravel, stoney earth and earth mixed with
small size boulders and hard gravelly soil, depositing the earth on
banks with initial lead of 10m and lowering into trenches, aligning and
testing of DWC PE or PP pipes, watering and ramming to consolidation,
etc., complete for the depth upto 2.0m
90 Cement concrete 1:3:6 using Crushed stone sand (M-sand) and 40mm 969.85 cu.m 3800.00 18%
gauge hard broken stone jelly and SRC for plain cement concrete works
including laying in layers of not more than 15cm thick including ramming
curing, etc., complete for End concrete.
92 1.05mx 0.9m
96 1200mm dia Circular machine hole for Sewers (upto 450mm dia)
108 1500mm dia Circular machine hole for Sewers (500mm dia & above)
116 Supplying and fixing 150mm dia MS Ventilating columns 6.0m length 147.00 Nos 72250.00 18%
with CI Base for Ventilating column, Wire Cowl, Supplying, Laying,
Jointing and Testing of 150mm dia stoneware pipe to a length of 6m for
each column with 100mm SW stopper including cost of joining materials
such as cement, sand and spun yarn with necessary civil works for
construction of Masonry Pillars, earthwork excavation, refilling etc.,
complete.
117 Providing Iron Barricading of size 2.50 m width and 1.75 m height using 160252.00 m 90.00 18%
40x40x4 mm angle for outer frame supports, 25 x 25 x 3 mm angle for
inner frame supports and 20 gauge thickness MS sheet for name board
(as per drawing) including cutting, welding, fabrication charges and one
coat of primer and 2 coats of enamel paint of approved quality, writing
"METRO WATER" & work detail/ caution sign, providing necessary
interlocking arrangements with adjoining units, fixing danger flags,
danger lights, reflectors, fixing stickers etc, including watching during
night and placing the barricading units as directed at the sites
147 Supplying and fixing drop pipes with 'U' clamps etc. complete (inside
machineholes) at required level as type design cutting, jointing and
filleting as per specification etc. complete.
150 Supplying and filling with stone dust for bedding for a thickness of 10cm 23058.61 cu.m 2500.00 18%
and back fill envelope for a thickness of 150mm above the crown of the
pipe for DWC PE pipes including ramming, consolidation etc., complete
151 Refilling with excavated soils (other than sand) complying with standard 67283.59 cu.m 110.00 18%
specifications for filling in foundations and basement. (for DWC PE or
PP pipe length)
152 Disposal of surplus earth (for DWC PE or PP pipe length) 26464.36 cu.m 185.00 18%
153 Making through holes in plain or reinforced cement concrete with
diamond core drilling system by using BOSCH power tools of following
diameters - depth per cm
156 Providing form work with centering for soffits of reinforced cement
concrete slabs or plain surfaces including shuttering for.
266 750 mm D/F C.I pipe - 2.5m long 2.00 Nos 18%
267 750 mm D/F C.I pipe - 1.5m long 4.00 Nos 18%
268 750 mm D/F C.I pipe - 0.5m long 5.00 Nos 18%
269 600 mm D/F C.I pipe - 0.5m long 8.00 Nos 18%
270 400 mm D/F C.I pipe - 0.5m long 6.00 Nos 18%
271 400 mm D/F C.I pipe - 1.5m long 1.00 Nos 18%
272 350 mm D/F C.I pipe - 0.5m long 5.00 Nos 18%
273 350 mm D/F C.I pipe - 1.0m long 1.00 Nos 18%
274 300 mm D/F C.I pipe - 0.5m long 7.00 Nos 18%
275 300 mm D/F C.I pipe - 1.0m long 5.00 Nos 18%
276 300 mm D/F C.I pipe - 2.0m long 3.00 Nos 18%
277 300 mm D/F C.I pipe - 2.5m long 3.00 Nos 18%
278 300 mm D/F C.I pipe - 3.0m long 6.00 Nos 18%
279 250 mm D/F C.I pipe - 0.5m long 9.00 Nos 18%
280 250 mm D/F C.I pipe - 1.0m long 6.00 Nos 18%
281 250 mm D/F C.I pipe - 1.5m long 3.00 Nos 18%
282 250 mm D/F C.I pipe - 2.0m long 9.00 Nos 18%
283 250 mm D/F C.I pipe - 2.5m long 3.00 Nos 18%
284 250 mm D/F C.I pipe - 3.0m long 9.00 Nos 18%
285 200 mm D/F C.I pipe - 0.5m long 11.00 Nos 18%
286 200 mm D/F C.I pipe - 1.0m long 3.00 Nos 18%
287 200 mm D/F C.I pipe - 2.0m long 3.00 Nos 18%
288 200 mm D/F C.I pipe - 2.5m long 3.00 Nos 18%
289 200 mm D/F C.I pipe - 3.0m long 6.00 Nos 18%
290 150 mm D/F C.I pipe - 2.0m long 3.00 Nos 18%
291 150 mm D/F C.I pipe - 0.5m long 17.00 Nos 18%
292 150 mm D/F C.I pipe - 1.0m long 9.00 Nos 18%
293 150 mm D/F C.I pipe - 1.5m long 13.00 Nos 18%
294 150 mm D/F C.I pipe - 2.5m long 9.00 Nos 18%
295 150 mm D/F C.I pipe - 3.0m long 9.00 Nos 18%
296 100 mm D/F C.I pipe - 0.5m long 4.00 Nos 18%
297 100 mm D/F C.I pipe - 1.0m long 2.00 Nos 18%
298 100 mm D/F C.I pipe - 1.5m long 4.00 Nos 18%
299 100 mm D/F C.I pipe - 3.0m long 2.00 Nos 18%
301 100mm dia D/F CI Pipe -0.5m length 3.00 Nos 18%
302 100mm dia D/F CI Pipe -1.0m length 3.00 Nos 18%
303 100mm dia D/F CI Pipe -2.0m length 17.00 Nos 18%
304 100 mm dia D/F CI bend 90o bend 6.00 Nos 18%
306 450mm dia D/F CI Pipe -1.8m length 1.00 Nos 18%
308 350 mm D/F C.I pipe - 1.4m long 2.00 Nos 18%
309 350 mm D/F C.I pipe - 3.5m long 2.00 Nos 18%
310 300 mm D/F C.I pipe - 1.2m long 1.00 Nos 18%
311 300 mm D/F C.I pipe - 3.0m long 1.00 Nos 18%
312 200 mm D/F C.I pipe - 0.8m long 2.00 Nos 18%
313 200 mm D/F C.I pipe - 2.0m long 2.00 Nos 18%
314 150 mm D/F C.I pipe - 0.6m long 1.00 No 18%
316 Supplying and laying 100 mm dia CI D/F pipe - 2m as per latest 6.00 m 18%
revision of IS 1536 with ISI markings on it length including earthwork
excavation in all kinds of soil, including refilling the excavated earth etc.
complete. (For Silt Raiser)
317 Supplying, laying , jointing and testing 110 mm dia UPVC pipes SN8- 18.00 m 18%
SDR 34(S 16.5) AS PER IS 15328/2003 pipe including earthwork
excavation for trenches in hard stiff clay, stiff black cotton, hard red
earth, shales, muram, gravel, stoney earth and earth mixed with small
size boulders and hard gravelly soil depositing the earth on banks with
initial lead of 10m , lowering the pipes into the trenches, aligning,
refilling the trenches with excavated earth in layers of not more than 23
cm thick watering , ramming to consolidation , depositing the surplus
earth, etc. complete at an average depth of 1.50m.
318 Supplying and delivery at site, conveying and fixing the CI sluice valves
as per IS 14846/2000 PN 1 with ISI marking excluding tail pieces and
including loading, transportation charges and stacking etc complete as
per specifications for the following sizes
327 Supplying and delivery at site, conveying and fixing the CI D/F Reflux
valves as per IS 5312/Part I /84 with Bye-pass arrangements with ISI
marking including loading, transportation charges and stacking etc
complete as per specifications for the following sizes
328 100mm DN Non-return Valve 2.00 Nos 18%
337 Jointinting the CI specials with molten lead and yarn including
338 150 mm 4.00 Nos 18%
346 Jointing the double flanged pipes and specials with rubber insertion to
the required specifications with M.S bolts and nuts, and testing the
pipes to the required pressure including cost of joining materials, etc.,
complete.
386 Hire charges for Diesel Pumpset for 5 HP with fuel and crew charges 64.00 Nos 2800.00 18%
including transportation
387 Cleaning and flushing the Sewer mains including hire charges for 4
nos. of diesel pumpset 7.5 HP for dewatering with fuel including
transportation and crew charges and using CMWSSB jet rodding
machine for flushing the pipeline(The hire charges for using the Board
jet rodding machine and cost of water has to be paid to CMWSSB by
the contractor )
388 Hire charges for 4 nos. of diesel pumpset 7.5 HP for dewatering with 13086.00 m 300.00 18%
fuel including transportation and crew charges and hire charges for
helmet sinking equipments including labour for helmet sinker and
removal of dummy etc complete.
389 The hire charges for using the Board jet rodding & Desilting machines 250.00 days 18%
and cost of water has to be paid to CMWSSB by the contractor (for the
work to be carried out at IT Corridor)
390 The hire charges for using the Board jet rodding & Desilting machines 190.00 days 18%
and cost of water has to be paid to CMWSSB by the contractor (for the
work to be carried out at Balavinayagar Nagar)
391 Cleaning and flushing the Pumping mains including hire charges for 4
nos. of diesel pumpset 7.5 HP for dewatering with fuel including
transportation and crew charges and using CMWSSB jet rodding
machine for flushing the pipeline (The hire charges for using the Board
jet rodding machine and cost of water has to be paid to CMWSSB by
the contractor )
395 Tracing and raising of machine holes upto 30 cm height using Stock 100.00 Nos. 248000.00 18%
brick work in C.M. 1:3(SRC) (Crushed stone sand(M Sand )), for 23 cm
thick, Outer Plastering in C.M. 1:3 (SRC) (Crushed stone sand(M
Sand ))for 12 mm thick, Inner Plastering in C.M. 1:3 (SRC) (Crushed
stone sand(M Sand )) for 20 mm thick , Cement concrete 1:3:6 using
12 to 20 mm guage hard broken stone jelly, including Suppling and
fixing of 60cm dia FRC new heavy duty frames and doors as per type
HD- 20, IS 12592, Part 1 & 2, cutting Asphaltic concrete road using
power drill / Air compressor, with necessary barrication work around the
trench with casurine post @ 1.52m c/c (8 to 10 cm dia & 1.52 m ht)
vertical, painting the vertical posts in different colour tieing with coir
rope, fixing danger flags, danger light reflectors including watching
during night etc., complete.
396 Tracing and raising of machine holes upto 45 cm height using Stock 232.00 Nos. 252000.00 18%
brick work in C.M. 1:3(SRC) (Crushed stone sand(M Sand )), for 23 cm
thick, Outer Plastering in C.M. 1:3 (SRC) (Crushed stone sand(M
Sand ))for 12 mm thick, Inner Plastering in C.M. 1:3 (SRC) (Crushed
stone sand(M Sand )) for 20 mm thick , Cement concrete 1:3:6 using
12 to 20 mm guage hard broken stone jelly, including Suppling and
fixing of 60cm dia FRC new heavy duty frames and doors as per type
HD- 20, IS 12592, Part 1 & 2, cutting Asphaltic concrete road using
power drill / Air compressor, with necessary barrication work around the
trench with casurine post @ 1.52m c/c (8 to 10 cm dia & 1.52 m ht)
vertical, painting the vertical posts in different colour tieing with coir
rope, fixing danger flags, danger light reflectors including watching
during night etc., complete.
397 Tracing and raising of machine holes upto 60 cm height using Stock 159.00 Nos. 258000.00 18%
brick work in C.M. 1:3, (SRC) (Crushed stone sand(M Sand )), for 23
cm thick, Outer Plastering in C.M. 1:3 (SRC) (Crushed stone sand(M
Sand ))for 12 mm thick, Inner Plastering in C.M. 1:3 (SRC) (Crushed
stone sand(M Sand ))for 20 mm thick, Cement concrete 1:3:6 using 12
to 20 mm guage hard broken stone jelly, including Suppling and fixing
of 60cm dia FRC new heavy duty frames and doors as per type HD-
20, IS 12592, Part 1 & 2, cutting Asphaltic concrete road using power
drill / Air compressor, with necessary barrication work around the trench
with casurine post @ 1.52m c/c (8 to 10 cm dia & 1.52 m ht) vertical,
painting the vertical posts in different colour tieing with coir rope, fixing
danger flags, danger light reflectors including watching during night etc.,
complete.
398 Tracing and raising of machine holes upto 75 cm height using Stock 21.00 Nos. 260000.00 18%
brick work in C.M. 1:3, (SRC) (Crushed stone sand(M Sand )), for 23
cm thick, Outer Plastering in C.M. 1:3 (SRC) (Crushed stone sand(M
Sand ))for 12 mm thick, Inner Plastering in C.M. 1:3 (SRC) (Crushed
stone sand(M Sand ))for 20 mm thick, Cement concrete 1:3:6 using 12
to 20 mm guage hard broken stone jelly, including Suppling and fixing
of 60cm dia FRC new heavy duty frames and doors as per type HD-
20, IS 12592, Part 1 & 2, cutting Asphaltic concrete road using power
drill / Air compressor, with necessary barrication work around the trench
with casurine post @ 1.52m c/c (8 to 10 cm dia & 1.52 m ht) vertical,
painting the vertical posts in different colour tieing with coir rope, fixing
danger flags, danger light reflectors including watching during night etc.,
complete.
399 Dismantling the Brick work and RCC slab in damaged MHs 25.00 e 1500.00 18%
400 Dewatering using 15HP & 20HP diesel engine pumpset including Hire
charges, cost of Diesel, Engine oil, pump operator, labour charges,
conveyance of pumpset and fuel to site and back, loading, unloading
and any other incidental charges etc., complete.
401 Hire charges for Diesel Pump set for 15 HP 1000.00 Hr 825.00 18%
402 Hire charges for Diesel Pump set for 20 HP 300.00 Hr 890.00 18%
418 Topographic Survey of assets and utilities of CMWSSB using the latest
technology to furnish “as built drawing with geo referenced Assets and
Utilities” in (.shp) file format and the attribute data in FDGB/ PDGB
format for incorporating into the GIS platform of CMWSSB
419 The Contractor must obtain the existing Static GCP points from
CMWSSB which should be considered as the control point with known
coordinates X, Y and Z. Survey consultant to ensure the closing error
is within permissible limits (SoI Standards) while transferring the levels from
the existing Static GCP points and the same to be presented as a report. The
same process shall be adopted for random verification of positional accuracy
of points established using the PBMs as base. As built survey
for every sewage and water pipeline and other assets must be done using
DGPS based RTK method by transferring the coordinates from the nearest
Static GCP of CMWSSB.
Where there are signal interruptions for the RTK method, Total Station can
be used. The coordinates from the static GCP shall be transferred to the Total
Station by RTK method and the co- ordinates of the assets can then be
captured by Total Station.
All the features, attributes of all the assets, utilities captured shall be Geo
referenced as per standard Coordinate reference system (WGS 84 UTM Zone
44N). The final base map with assets and utilities shall be
furnished in (.shp) format. The geo referenced assets and utilities along with
the attributes (as specified by the GIS Wing, CMWSSB) shall be converted into
proper geo database (FGDB / PGDB) with the attributes.
One set Hard and Soft Copy of all the CMWSSB assets and utility
has to be prepared category wise network wise in A0 Print for verification in a
print scale of 1:1000 in A0 plot, with standard legends in international and
NUIS standards and should be legible and three sets of final Hard Copy in A0
print.
420 Length of Pipelines for both collection system & Pumping Main covering 80.17 Km 18%
Machineholes and Valve chambers along the alignment
421 Surface assets like SPS, LS, etc 9.00 Nos 18%
422 For Works in Bus Route during Night Hours
456 Cement concrete 1:3:6 using Crushed stone sand (M-sand) and 40mm 45.77 cu.m 18%
gauge hard broken stone jelly for plain cement concrete works including
laying in layers of not more than 15cm thick including ramming curing,
etc., complete for End concrete in Bus route roads during night hours
457 Construction of Precast circular RCC machine holes using sulphate
resistant cement with M30 design mix concrete using Crushed stone
sand (M sand) including earthwork excavation as per SS20B including
timbering and pumping charges(for 2.5m depth and above),Providing
Plain Cement Concrete 1:1.5:3 using 20mm B.G. jelly for
foundation,supplying and filling sand for bedding, Providing base units
of 1m height(base slab and sidewall),riser unit (without corbel) of
varying heights to suit the various depth requirements and roof slab
including cost of steel reinforcement, cost of fabricating the steel mould
using MS sheet and ISA angles including material and labour cost,
Providing CI steps,fixing FRC machine hole frame and door,benching
and channelling ,refilling with excavated earth and disposal of surplus
earth, joining of precast units by grouting with CM1:1 and polyurethane
based water proofing compound 1% (by weight of cement ) at shear
key and protruded bars- grout holes locations,Cost of conveyance and
erection charges of precast machine holes at the required position as
directed by the engineer at site including testing the machine hole with
water for 48 hours to check water tightness and rectifying the defects if
any for the following sizes and depths with necessary lighting
arrangement etc., complete in Bus Route Roads during Night Hours
458 1200mm dia Circular machine hole for Sewers (upto 450mm dia)
469 1500mm dia Circular machine hole for Sewers (500mm dia & above)
470 at 3.5m deep 2.00 Nos 18%
478 Cutting DWC PE Pipes in Bus route roads during night hours
484 Refilling with excavated soils (other than sand) complying with standard 5338.99 cu.m 90.00 18%
specifications for filling in foundations and basement.(for DWC PE or
PP pipe length) in Bus Route Roads during Night Hours
485 Disposal of surplus earth (for DWC PE or PP pipe length) in Bus Route 1552.73 cu.m 148.00 18%
Roads during Night Hours
486 Providing form work with centering for soffits of reinforced cement
concrete slabs or plain surfaces including shuttering with necessary
lighting arrangements in bus route roads during night hours
488 Providing and laying in position design mix cement concrete of M20 5536.30 cu.m 475.00 18%
grade for thickness of 100 mm after refilling of trenches for temporary
restoration of bus route roads to be carried out during night hours
489 Supply, conveying and fixing CI specials as per the latest revision of
IS 1538 including with ISI markings on it including earthwork excavation
in hard stiff clay, stiff black cotton, hard red earth, shales, murams,
gravel, stoney earth and earth mixed with small size boulders and hard
gravelly soil, depositing the earth on banks with initial lead of 10m.,
lowering into the trenches, aligning, refilling the trenches with excavated
soil, watering and ramming to consolidation with necessary lighting
arrangements, etc. complete in bus routes roads during night hours
503 Supply, delivery, erection of sheet piles and fixing in position using
timbering for trenches of average depths of 1.5m to 2.0m, including hire
charges of sheet piles, dismantling the shoring after completion of work,
etc., complete with necessary lighting arrangements for carrying out the
work in Bus Route roads during night hours.
510 Earth work excavation in hard stiff clay, stiff black cotton, hard red
earth, shales, murum, gravel, stoney earth or earth mixed with small
size boulders and hard gravely soil as per SS20B with initial lead of
10m and lift of 2m etc. complete.
515 Supplying and filling crushed stone sand (M sand) for foundation and 242.68 cu.m 2500.00 18%
basement including watering, consolidating, ramming etc. complete.
516 Providing form work with centering for soffits of reinforced cement
concrete slabs or plain surfaces including strutting
517 From 1.0m above ground level to 3.0m below ground level (Curved 5105.63 sq.m 500.00 18%
Surface)
518 upto 3m high (below & above) 4263.69 sq.m 540.00 18%
524 Providing form work with centering for soffits of reinforced cement 14.41 sq.m 500.00 18%
concrete slabs or plain surfaces including strutting for bed blocks inside
the well.
525 Cement concrete 1:3:6 using Crushed stone sand (M-sand) and 40mm
gauge hard broken stone jelly for plain cement concrete works including
laying in layers of not more than 15cm thick including ramming curing,
etc., complete
526 upto 1.5m from G.L 77.84 cu.m 4000.00 18%
528 Cement concrete 1:2:4 using Crushed stone sand (M-sand) and 20mm 0.60 cu.m 7250.00 18%
gauge hard broken stone jelly for plain concrete works including laying
ramming curing, etc., complete.
Upto 1.5 m depth below GL
529 from 1.5m to 4.5m depth below G.L 1.20 cu.m 7600.00 18%
530 Cement concrete 1:2:4 using Crushed stone sand (M-sand) and 20mm
gauge hard broken stone jelly & SRC for plain concrete works including
laying ramming curing, etc., complete.
531 Up to 1.5m Below & 1.0m above ground level 0.67 cu.m 7250.00 18%
532 1.5m to 4.5m depth below G.L 3.03 cu.m 7500.00 18%
535 Cement concrete 1:3:6 using Crushed stone sand (M-sand) and 40mm 1.59 cu.m 4250.00 18%
gauge hard broken stone jelly & SRC for plain cement concrete works
including laying in layers of not more than 15cm thick including ramming
curing, etc., complete
538 upto 1.5m above & below G.L 302.79 cu.m 7200.00 18%
542 Providing and laying in position machine batched, machine mixed and
machine vibrated design mix cement concrete of M25 grade using SRC
with M sand for reinforced cement concrete structural elements under
controlled water cement ratio with plasticiser using 20mm and down
graded machine broken granite stone jelly excluding the cost of
centering and shuttering and reinforcement but including curing, fixing,
fan clamps etc., as per standard specification and as directed by the
Board officers complete
543 upto 1.5m above & below G.L 64.27 cu.m 7250.00 18%
546 Providing and laying in position machine batched machine mixed and
machine vibrated design mix. Sulphate resistance cement concrete
M30 grade (M sand) for reinforced cement concrete structural
elements under controlled water cement ratio with plasticiser using
20mm and down graded machine broken granite stone jelly excluding
the cost of centering and shuttering and reinforcement but including
curing, Mixer, vibrator, etc. as per standard specification and as
directed at site
547 Up to 1.5m Below ground level & 1m above GL 1790.85 cu.m 7800.00 18%
548 From 1.5m to 4.5m Below ground level 50.19 cu.m 8000.00 18%
549 From 4.5m to 9.0m Below ground level 97.70 cu.m 8250.00 18%
550 Beyond 9.0m Below ground level 108.95 cu.m 8500.00 18%
551 Providing and laying in position machine batched, machine mixed and
machine vibrated design mix cement concrete of M30 grade (M-sand)
for reinforced cement concrete structural elements under controlled
water cement ratio with plasticiser using 20mm and down graded
machine broken granite stone jelly excluding the cost of centering and
shuttering and reinforcement but including curing, fixingetc., as per
standard specification and as directed
552 Up to 1.5m Below ground level & 1m above GL 12.60 cu.m 7800.00 18%
553 From 1.5m to 4.5m Below ground level 7.20 cu.m 8000.00 18%
554 Providing point edge to well kerb using ISA 200x150x16 mm of weight 13041.00 kg 90.00 18%
42.20 kg/m
555 Sinking of well below water level including all incidental charges using
special tools and plants such as air compressior, helmet etc., complete
and including bailing out water.
594 Plugging the bottom of the well using C.C 1:3:6 using 40mm gauge
hard broken stone jelly with 10% extra cement for plain cement
concrete works including laying in layers of not more than 15cm thick
including ramming curing etc complete
597 Supplying and fabricating CRS/Thermo Mechanically Treated High 304959.00 kg 80.00 18%
Corrosion Resistance bars manufactured by Primary steel
producers/Integrated Steel Plants as per IS:1786-2008,including fixing
with binding wires, assembling and laying in position for all RCC works
using 10mm -32mm dia rod (Fe-500 D Grade with CRS material)
598 Stock brick work with II class bricks in cement mortor 1:5 (Crushed
stone sand (M-sand)) for 23 cm thick walls including curing etc.
complete.
601 Stock brick work in cement mortor 1:4 (Crushed stone sand (M-sand))
using second class bricks including curring etc. complete for 23 cm
thick wall
602 Up to 1.5m below & above ground level 38.60 cu.m 6000.00 18%
603 Ground floor 66.00 cu.m 6000.00 18%
605 Stock brick work in cement mortor 1:4 (Crushed stone sand (M-sand)) 7.00 cu.m 5500.00 18%
using second class bricks including curring etc. complete for 11cm
thick wall.
606 Supplying and fixing barbed wire fencing over the proposed compound 1008.00 m 18%
wall with ‘L’ angle iron 50 x 50 x 6mm & 1.45m posts bent to shape at
2.5m centres with 6 rows of barbed wire and also in a zig zag manner
at 25cm c.c. connecting all the rows with barbed wire will be of 2 ply
and 12 gauge or other approved size including drilling hole in ‘L’ iron
posts and fixing the posts in cement concrete 1:2:4 of size 15x15x45cm
etc as directed
607 20mm thick sand faced cement plaster on wall upto hight 10 meters 5271.84 m 335.00 18%
above ground level consisting of 12mm thick backing coat of CM 1:3 ( 1
cement : 3 sand ) and 8mm thick finishing coat of CM 1:1 ( 1 cement : 1
sand ) etc complete
608 Plastering with C.M.1:3 (M-Sand) for 20mm thick including curing etc 605.40 sq.m 320.00 18%
complete.
609 Plastering with C.M.1:3 using Sulphate resistant cement with M- sand 3095.27 sq.m 320.00 18%
for 20mm thick including curing etc complete.(well inner)
610 Plastering with C.M.1:3 (SRC with M-sand) for 12mm thick including 1132.64 sq.m 294.00 18%
curing etc complete.
611 Plastering with C.M 1:3 (M-Sand) for 12mm thick including curing etc. 446.40 sq.m 294.00 18%
complete
612 Special ceiling plastering for RCC slabs, and beams in CM 1:3 – 10mm 69.00 sq.m 294.00 18%
thick with M-Sand including hacking and curing, etc., complete
613 Flooring with 100mm thick base cement concrete 1:4:10 using 40mm 56.00 sq.m 600.00 18%
gauge brick jelly including laying ramming, curing, etc., complete.
614 Granolithic flooring 25mm thick with cement concrete 1;2:4 using 3- 40.00 sq.m 750.00 18%
10mm chips and top surface rendered smooth with cement including
thread lining and 25mm dia G.I. pipe of necessary length for water
outlet curing, etc. complete
615 Paving Hydraulic Pressed Cement Double Charged Vitrified Tiles of 20.00 sq.m 1350.00 18%
size 800 x 800 x 10mm finished thickness with small Verona or Indian
Marble Chips (other than Salem Magnasite) with CM 1:3, 20mm thick
and painted with same colour Cement including polishing with power
polisher to a high degree of polish so as to be perfectly smooth and
glossy with GREY colour
616 Dadooing walls with glazed tiles of sizes 15cmx15cmx6mm thick laid in 12.00 sq.m 1350.00 18%
CM 1;2, 10mm thick and pointing with white cement using 0.4 Kg/m2
including finishing the joint and pointing flush with tile surface, etc.,
complete.
617 Terrace flooring with two course of flat tiles of 15cmx15cmx12mm using 81.00 sq.m 650.00 18%
CM 1:3 mixed with crude oil 10% by weight of cement and pointed with
same oiled mortar
618 Weathering course Concrete with broken brick jelly 20mm gauge in 8.00 sq.m 1200.00 18%
pure slacked lime over R.C.C. roof slab in the proportion of 32:12 ½ (No
sand to be used )well beaten with wooden beaters to the required depth
of 80mm thick and giving required slope and thickness to roof as
required, etc., complete.
619 Supplying and erecting rolling shutters of 76mm 18 gauge of galvanised 36.00 sq.m 6000.00 18%
steel sheet with push and pull or self coiling type operated by pulling
hook with top cover including locking arrangements and fixed in position
inside or outside, etc., complete and painting with priming coat of
redoxide without lock. (payment will be made by only for the actual
opening of the shutters are rolled up wherever the shutters are to be
fixed)
620 UPVC OPENABLE TYPE WINDOW SIZE 1.2M X 1.3M 14.00 sq.m 4800.00 18%
Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride)
Windows of casement type (open) from the profile the size of outer
frame 60mm x 58mm and shutter profile are reinforcement with
G1/1mm 125GSM and 100% corrosion free, the profiles are multi
chambered sections with wall thick of 2mm. The EPDM rubber (black
colour) covered with over all the edges of frame and shutter the
shutter will be provided with Espag multi power point locks and also it
operates as handle. The corners and joints should be welded and
cleaned. Radiations free pin headed plain or brown colour glass
4mm thick should be provided to the shutter and it should not allow
leakage of water even at most ranging storms and should have key
lockable action, security protective hinges, strong locking
systems and as per size for arresting noise and energy loss. The
connecting mechanism between sash and outer frame that enables
opening of the window. The window should be fixed to the wall with
100% packing with screws and silicon packing all round the
frames. The window should be got approved from the
Executive Engineer before use on work
621 Supplying, fabricating and fixing in position of Alumi.Anod.natural colour 18.00 sq.m 4800.00 18%
matt finish door (of single leaf of size 2.1m x 1.0m) half glazed and half
PLB board using 12 mm thick PLB board and 5.5 mm thick glazed
door using rectangular Alu.Box section of size (Frame : Section -
101.60 x 44.45 x 3.18 mm @ 2.399 Kg/m, Shutter : Top, Middle,
Vertical style- 50 x 44.45 x 2.5mm @ 1.292 Kg/m, Bottom - 100 x 44.45
x2.5mm @ 1.974 Kg/m) with necessary accessories such as rubber
beading, Al. Clips, Best double action floor springs, Aluminium Handles
on both sides,floor stopper,Tower bolt, Locks and glass including all
materials,Labour, power consemption charges required for fabrication if
necessary chipping, dismantling making necessary holes in RCC
Coloums, Beams or Masonry wherever necessary with power drill to the
extent required and made good to the original conditions after
fixing etc.,complete. The Alumi. surface must be anodised with matt
finish under electrically controlled condition in accordance with IS
specification 1868 / 1962 of Anodic filthickness of not less than 15
Microns (Fifteen) for all sections.All the materials should be got
approved by the Site Engineer before fixing as directed.
622 Solid PVC door shutters using 19 Gauge 19mm MS square tubes for 2.00 sq.m 3500.00 18%
styles and outer frames.15mm MS Square tubes for top, lock and
bottom rails. The steel tubes shall be covered with 5mm thick solid PVC
sheets. Shutter using 5mm thick solid PVC sheets for panelling shall
rigidly fixed in position including necessary furniture and fittings. The
overall size of styles shall be 50mm x 30mm. The overall size of top rail,
Lock rail and bottom rail shall be 75mm x 30mm. The overall size of
frames shall be 50mm x 45mm, with suitable rabate for housing the
shutter.
a. Solid panel PVC door with frame
623 Supplying and fixing in position of aluminium anodised colour matt finish 1.00 sq.m 5250.00 18%
Louvered Ventilator. The outer frame will be 62x38x2mm @ 1.17 Kg / m
and the louvers with moving arrangements will be made with Alu.
Channel of size 60x30x4 mm @ 1.27 kg /m with necessary glass pans
for louvers 4mm thick Al. Clips, including all materials, labour & power
consumption charges required for fabrication if necessary chipping
dismantling making holes in RCC columns,beams or masonry wherever
necessary with power drill to the extent required and make good to the
original conditions after fixing etc., complete. The Aluminium surface is
to be anodised with matt finish under electrically controlled condition in
accordance with ISI specification 1868/1962 of anodic film thickness of
not less than15 microns (fifteen) for all sections. All the materials should
be got approved by the Site Engineer before fixing in position as
directed.
624 Supplying and fixing M.S. grills for window and gate including one coat 140.00 kg 90.00 18%
of primer with red lead etc. complete as directed.
625 Supplying and fabricating and erection of iron gate with grill works of 3360.00 kg 115.00 18%
required size as per direction at site with G.I pipes of 50 mm and
specials at all sides and 40x40x6mm angles as bracing on which 2
No.of m.s sheet of 16 gauge of size 2x2.50m each is welded as two
halves fixing letter ''METROWATER' including one coat of primer with
red lead etc.compete as directed including fixing wicket gate of size
0.75x2.m with M.S.grill work
626 Refilling with excavated soil ( other than sand) complying with standard 1383.38 cu.m 90.00 18%
specifications for filling in foundations & basement
630 Colour washing two coats over one coat white washing 5832.42 sq.m 120.00 18%
631 Painting with two coats of ready mixed exterior emulsion paint of good 546.00 sq.m 210.00 18%
quality and of approved colour over a priming coat including thorough
scrapping clean removal of dirt, etc., complete and including
necessaary plaster of paris, putty, etc., wherever required.
For Exterior Walls
632 Painting with two coats of ready mixed plastic emulsion paint first class 384.00 sq.m 200.00 18%
quality and of approved colour over a priming coat including thorough
scrapping clean removal of dirt, etc., complete and including
necessaary plaster of paris, putty, etc., wherever required.
For Interior Walls
633 White washing three coats ( Ceiling) 69.00 sq.m 120.00 18%
634 Painting two coats with superior quality of ready mixed paints of 256.60 sq.m 200.00 18%
chocholate colour, light green or grey colour or any other approved
colour over painting with primary coat (red lead) on new iron work.
635 Providing and fixing 160 mm dia PVC Rainwater downfall pipe from roof 30.00 m 600.00 18%
to the RWH chamber for collecting the water (2 m horizontal distance
from RWH pit)
636 Providing and fixing 75mm dia Nahani trap (floor trap) with brass 5.00 nos 1350.00 18%
gratings
637 Providing 75 mm dia PVC pipe from Nahani floor trap to the RWH 10.00 nos 1500.00 18%
chamber for collecting the rain water and tap water.
638 Supplying and fixing of stainless steel ladder consisting of side support 35.00 m 2100.00 18%
and foot rest made up of 18 SWG ,304 Grade stainless steel with
stainless steel welded joints.The width of the ladder is 45cms.
639 Precast slab 100mm thk in Cement Concrete 1:2:4 using Crushed 290.83 sq.m 7250.00 18%
stone sand (M-sand) and 12 to 20mm gauge hard broken stone jelly for
reinforced cement concrete works including cost of steel, centering,
shuttering and cost of steel reinforcement and including laying in
position, compacting, curing, finishing,as per drawings,or as directed
etc., complete.
640 Supply and erection of Cast Iron single faced manually operated rising
type penstock of following dia conforming to relevant IS with IS
markings on it, having cast iron door and frame with Gunmetal seating,
spindle made of Stainless steel, CI head stock with gear arrangment
and hand wheel fitted in well
653 Supply and installation of SS open mesh flooring of grade 316 with 12544.00 Kg 285.00 18%
25x6mm thick flats for outer frame and 25x3mm SS and 12x3mm SS
flats spaced at 30mm and 60mm respectively forming a mesh on the
surface of the well .
654 Supplying and fixing SS screen of grade 316. The screen shall be 10955.00 Kg 320.00 18%
fabricated out of stainless steel flats of 50 x 10mm. The outer frame
also shall be of 50 x 10mm fixed inside the well for seating the screen.
The screen shall be so fabricated that the inclined portion of the screen
is fixed and the horizontal portion of the screen is a removable one for
lifting the pump for maintenance purpose. Outer frame and 50x10mm
SS flats spaced at 35mm centre to centre to serve bar screens inside
the screen well
655 Supply and fixing ISMB 600mm of 122kg/m for 11m on column over 1342.00 kg. 90.00 18%
suction well
656 Supply and fixing ISMB 600mm of 122kg/m for 11.5m on column over 4209.00 kg. 90.00 18%
suction well
657 Supply and fixing ISMB 600mm of 122kg/m for 13m on column over 1586.00 kg. 90.00 18%
suction well
658 Supply and fixing ISMB 300mm of 42.2kg/m for 7.0m on column over 296.00 Kg 90.00 18%
suction well
659 Supply and fixing ISMB 300mm of 42.2kg/m for 5.5m on column over 466.00 Kg 90.00 18%
screen/grit well
660 Supply and fixing ISMB 400mm of 52.4kg/m for 7.5m length 498.00 kg. 90.00 18%
661 Supply and fixing ISMB 400mm of 66.3kg/m for 6m on column over 398.00 kg. 90.00 18%
suction well
662 Supply and fixing ISMB 400mm of 66.3kg/m for 8m on column over 1062.00 kg. 90.00 18%
suction well
663 Supply and fixing ISMB 400mm of 66.3kg/m for 6.5m on column over 431.00 kg. 90.00 18%
suction well
664 Supply and fixing ISMB 300mm of 42.2 kg/m for 5m length 422.00 kg. 90.00 18%
665 Erecting pulley block of 2Tonne capacity with a 3m chain including 2.00 Nos 35000.00 18%
additional chain length of 8m facilitate for horizontal movement on the
beam etc complete for suction well
666 Erecting pulley block of 2Tonne capacity with a 3m chain including 1.00 Nos 35000.00 18%
additional chain length of 13m facilitate for horizontal movement on the
beam etc complete for suction well
667 Erecting pulley block of 2Tonne capacity with a 3m chain including 1.00 Nos 35000.00 18%
additional chain length of 9m facilitate for horizontal movement on the
beam etc complete for suction well
668 Erecting pulley block of 1Tonne capacity with a 3m chain including 1.00 Nos 35000.00 18%
additional chain length of 5m facilitate for horizontal movement on the
beam etc complete for well
669 Erecting pulley block of 2Tonne capacity with a 3m chain including 1.00 Nos 35000.00 18%
additional chain length of 7m facilitate for horizontal movement on the
beam etc complete for suction well
670 Erecting pulley block of 1Tonne capacity with a 3m chain including 2.00 Nos 35000.00 18%
additional chain length of 8m facilitate for horizontal movement on the
beam etc complete for well
671 Erecting pulley block of 2Tonne capacity with a 3m chain including 1.00 No 35000.00 18%
additional chain length of 9m facilitate for horizontal movement on the
beam etc complete for suction well
672 Erecting pulley block of 1Tonne capacity with a 3m chain including 2.00 Nos 35000.00 18%
additional chain length of 8m facilitate for horizontal movement on the
beam etc complete for well
673 Erecting pulley block of 1Tonne capacity with a 3m chain including 2.00 Nos 35000.00 18%
additional chain length of 6m facilitate for horizontal movement on the
beam etc complete for well
674 Erecting pulley block of 1Tonne capacity with a 3m chain including 1.00 No 35000.00 18%
additional chain length of 7m facilitate for horizontal movement on the
beam etc complete for well
675 Erecting pulley block of 2Tonne capacity with a 3m chain including 1.00 No 35000.00 18%
additional chain length of 9m facilitate for horizontal movement on the
beam etc complete for suction well
676 Painting with superior quality ready mixed paint of chocolate, light 200.78 sq.m 85.00 18%
green, grey or any other approved colour over ISMB (for new iron work
two coats).
677 Providing and fixing colour glazed European water closet with rose 1.00 E 4600.00 18%
wood seatings (Black) low level flushing tank with fittings, etc.,
complete.
678 Providing and fixing 100 mm dia CI soil or vent pipe 2.80 m 1500.00 18%
679 Providing and fixing 50 mm dia CI soil pipe bend without door 1.00 E 1800.00 18%
arrangement for bathroom
680 Providing and fixing 100mm dia CI soil or vent pipe bend without door 1.00 E 1500.00 18%
arrangements
681 Providing and fixing 50 mm dia CI soil or vent pipe for bathroom 1.50 E 1250.00 18%
682 Providing and fixing 15 x 10 cm SW gully trap with CI gratings in BJ 1.00 E 3200.00 18%
concrete in CM 1:4:10 with silt pit diaphragm arrangements etc.,
complete.
683 Supplying, laying jointing and testing 110 mm dia UPVC pipe including 7.00 m 650.00 18%
earthwork excavation for trenches in hard stiff clay, stiff black cotton,
hard red earth, shales, murams, gravel, stoney earth and earth mixed
with small size boulders and hard gravelly soil, depositing the earth on
banks with initial lead of 10m. lowering the pipes into the trenches,
aligning, refilling the trenches with excavated earth in layers of not more
than 23cm thick watering, ramming to consolidation and disposal of
surplus earth etc., complete at average depth of 1.5 m
684 Construction of inspection chamber with earth work excavation for 1.00 E 7500.00 18%
foundation, 23cm thick concrete bed using 40mm brick jelly concrete in
C.M. 1:4:10 (SRC) for foundation, brick work in C.M. 1:6 (SRC) for
chamber, plastering with C.M. 1:3 (SRC),12mm thick, benching,
channelling, supplying and fixing 60x60cm medium weight L.S. cover
and frame, etc., complete for
a. 60cm x 60cm x 75cm
685 Supplying and fixing 55cm x 40cm colour glazed wash basin with lead 1.00 E 5500.00 18%
and brass connections, C.P. Pillar Tap and other fittings, etc., complete
686 Supplying and fixing best mirror of size 60cmx45cm of 6mm thick with 1.00 E 2800.00 18%
plywood back including necessary fittings, etc., complete
687 Supplying and fixing C.P towel rails 45cmx 20mm 1.00 E 350.00 18%
688 Supplying GI pipes and specials of size 25mm dia including cutting, 104.00 m 142.00 18%
threading and jointing with necessary specials including carting the
materials, fixing to wall with necessary clamps and screws, making
holes in roof, repacking the same with necessary brickwork and
plastering wherever necessary with scaffolding etc., complete
691 Supplying and fixing 20mm dia C.P Screw down Tap 7.00 E 18%
692 Supply and delivery of Electric Monoset centrifugal pump of capacity 6.00 set 18%
100lpm and 20m head conforming to IS 9079:2002 as amended from
time to time, with CI FG 200 Casing ,hydraulically and dynamically
balanced Bronze grade LTB-2 impeller, impellerring and casing ring,
stainless steel shaft capable of discharging required quantity of water
against a total head noted below due to all causes. Pump shall of BEE
3 Star Rated and capable of discharging the specified quantity at the
head noted at the minimum NPSHA at site conditions. The shut off
head shall be atleast 25% over and above the head at duty point. The
pump shall be suitable for operation in AC three phase , 415 V+/- 10% ,
50 Hz +/- 5%. Squirrel cage induction motor for continuous operation.
The speed of the Pump and Motor shall be not less than 2700 to 2900
RPM respectively.
693 Supply and delivery and fixing of HDPE tank 500 litres capacity as per 5.00 Nos 11000.00 18%
IS 12701 / 1996 including loading, unloading, transportation and labour
charges for fixing of the GI pipes and specials for pipe connection
works including cutting, threading and fixing charges as directed at site
etc.,
694 Supply and delivery and fixing of HDPE tank 1000 litres capacity as per 1.00 No 23000.00 18%
IS 12701 / 1996 including loading, unloading, transportation and labour
charges for fixing of the GI pipes and specials for pipe connection
works including cutting, threading and fixing charges as directed at site
etc.,
695 Supplying and fixing in position Cement based hydrualically pressed 3.00 sq.m 750.00 18%
Anti-Skid tiles (pattern design) 20 mm thick in cement mortar 1:3 , 20
mm thick & pointed with same colour of cement etc.,complete.
696 Laying CC 1:2:4 for RCC sun shade works using 20mm HBG jelly 42.00 m 6800.00 18%
80mm thick at wall end and 50mm thick at free end and projecting
600mm from wall face moulded along with RCC lintels and tailed into
full thickness of wall where there no lintels excluding cost of steel
reinforcement but including shuttering, compacting, curing and finishing
etc. complete.
697 Supplying hard broken granite stone jelly I.S.S 40 mm for filling 1.20 cu.m 1050.00 18%
698 Supplying hard broken granite stone jelly I.S.S 20 mm for filling 1.20 cu.m 1450.00 18%
699 Supply of PVC slotted pipe, 160 mm dia 44.40 m 650.00 18%
700 Supply of PVC end cap 160 mm dia 6.00 m 180.00 18%
701 Drilling of bore well of size 16" dia in sedimentayr formation using hand 48.00 m 18%
boresets including insertion of casing pipes suppling and packing of
pebbels and conveyance of hand boreset including loading and
unloading
702 Providing and fixing FRC cover and frame of size 60 x 60 cm including 6.00 Nos 3500.00 18%
necessary masonry work and plastering etc. complete
703 Construction of chamber using SRC with M-sand for 100mm to 250mm 3.00 Nos 85000.00 18%
dia. sluice valve including providing and fixing FRC cover and frame of
size 60 x 60cm for size (2.0 x 1.2 x 2.0) m
704 Construction of chamber using SRC with M-sand for 300mm to 400mm 1.00 No 155000.00 18%
dia.sluice valve including providing and fixing FRC cover and frame of
size 60 x 60cm for size (2.5 x 1.5 x 2.5) m
705 Construction of 80mm Double Air Valve chamber using SRC with M- 5.00 Nos 125000.00 18%
sand for 100mm to 350mm dia pipeline including providing and fixing
FRC cover and frame of size 60 x 60cm for size 1.2 x 0.9 x 1.8 m
706 Construction of 100mm Double Air Valve chamber using SRC with M- 1.00 No 148000.00 18%
sand for 400mm to 500mm dia pipeline including providing and fixing
FRC cover and frame of size 60 x 60cm for size 1.5 x 1.2 x 2.3 m
707 Construction of 150mm Double Air Valve chamber using SRC with M- 5.00 Nos 148000.00 18%
sand for above 600mm dia pipeline including providing and fixing FRC
cover and frame of size 60 x 60cm for size 1.5 x 1.2 x 2.3 m
708 Construction of Rising Main Disposal chamber of size 1.2 m X 1.0 m X 4.00 Nos 28500.00 18%
1.0 m using SRC with M-Sand with earth work excavation for
foundation, 23cm thick concrete bed using 40mm brick jelly concrete in
C.M. 1:4:10 for foundation, brick work in C.M. 1:6 for chamber,
plastering with C.M. 1:3,12mm thick, benching, channelling, supplying
and fixing 60x60cm medium weight FRC cover and frame, etc.,
complete
709 Construction of water meter Chamber in second class brick work in CM 3.00 Nos 146000.00 18%
1:4 proportion with 12mm thick outside plastering and 20 mm thick
inside plastering in CM 1:3 proportion, RCC cover slab in CC 1:2:4
proportion using 20 mm jelly, chamber foundation and bed block in PCC
1:3:6 proportion using 40 mm jelly using SRC & M-sand including cost
of reinforcement and labour charges,earth work excavation,sand
filling,refilling and disposal of surplus earth ,fixing CI steps, etc.
complete and including providing and fixing FRC cover and frame of
size 60cmx60cm including necessary masonry work and plastering etc
complete as directed by the Engineer at site as per specification of
sizeas mentioned below 1.5 m x 1.5 m x 2.3 m for 150-200mm Dia
710 Construction of water meter Chamber in second class brick work in CM 1.00 Nos 152000.00 18%
1:4 proportion with 12mm thick outside plastering and 20 mm thick
inside plastering in CM 1:3 proportion, RCC cover slab in CC 1:2:4
proportion using 20 mm jelly, chamber foundation and bed block in PCC
1:3:6 proportion using 40 mm jelly using SRC & M-Sand including cost
of reinforcement and labour charges,earth work excavation,sand
filling,refilling and disposal of surplus earth ,fixing CI steps, etc.
complete and including providing and fixing FRC cover and frame of
size 60cmx60cm including necessary masonry work and plastering etc
complete as directed by the Engineer at site as per specification of
sizeas mentioned below 1.7 m x 1.6 m x 2.3 m for 250-300mm Dia
711 Construction of water meter Chamber in second class brick work in CM 2.00 Nos 152000.00 18%
1:4 proportion with 12mm thick outside plastering and 20 mm thick
inside plastering in CM 1:3 proportion, RCC cover slab in CC 1:2:4
proportion using 20 mm jelly, chamber foundation and bed block in PCC
1:3:6 proportion using 40 mm jelly including cost of reinforcement and
labour charges,earth work excavation,sand filling,refilling and disposal
of surplus earth ,fixing CI steps, etc. complete and including providing
and fixing FRC cover and frame of size 60cmx60cm including
necessary masonry work and plastering etc complete as directed by
the Engineer at site as per specification of sizeas mentioned below
1.75 m x 1.6 m x 2.3 m for 350mm Dia
712 Construction of water meter Chamber in second class brick work in CM 1.00 No 155000.00 18%
1:4 proportion with 12mm thick outside plastering and 20 mm thick
inside plastering in CM 1:3 proportion, RCC cover slab in CC 1:2:4
proportion using 20 mm jelly, chamber foundation and bed block in PCC
1:3:6 proportion using 40 mm jelly including cost of reinforcement and
labour charges,earth work excavation,sand filling,refilling and disposal
of surplus earth ,fixing CI steps, etc. complete and including providing
and fixing FRC cover and frame of size 60cmx60cm including
necessary masonry work and plastering etc complete as directed by
the Engineer at site as per specification of sizeas mentioned below
1.90 m x 1.75 m x 2.3 m for 450mm Dia
715 Plantation of rows of plants and shrubs on compound wall inside the 1008.00 m 18%
pumping station as directed
717 R.C.C. approach road at SPS site: Construction of R.C.C. approach 489.00 sq.m 4000.00 18%
road (3mt. wide) including clearance of site, required excavation,
granular sub-base layer (300mm thk.) with C.C. M-10 of Dry Lean
Concrete (150mm thk.) and M-30 grade of C.C. (100mm thk.) as per
mix desing and applicable MORTH standards including joints,
reinforcement of 10mm dia. at 230mm c/c both way, other material,
labour charges etc. as directed by engineer incharge.
718 Band course work flat 10mm to 12mm thick and 50mm deep with C.M. 1033.20 m 18%
1:3 (Crushed stone sand (M-sand) including curing, etc., complete as
directed
719 Supplying and fixing PVC water bar, 150 mm wide for construction joint 2113.44 m 650.00 18%
720 Hiring charges for Electrically operated Breaker machine for 640.00 Hrs 18%
demolishing and breaking the Concrete debris of OHT
721 Hiring charges for JCB for levelling and loading for removal of concrete 64.00 Hrs 1250.00 18%
722 Transportation charges for clearing the Broken concrete debris to near 40.00 No 18%
by SPS location
723 Removing the EB main switch box,meter and allied works for reuse 4.00 No 18%
a)Electrician Category II
724 Barrication all around the OHT from top to bottom upto 10m using 1887.60 sq.m 18%
Green net cloth with scaffholding
725 Labour for cleaning,watering the structures frequently (to avoid dust) 60.00 No 18%
diverting the trafficc oneither side of the street
726 Dismantling and removing the GI pipes and specials,Dispaly Board and 8.00 No 18%
other allied works including neatly stacking the materials from the OHT
site
Plumber Category I
729 Supplying and fixing FRC cover and frame of size 60x60cm including 2.00 No. 3500.00 18%
necessary masonry work and plastering etc complete.
733 Supply, delivery, erection, commissioning & testing of 11 kV, 6 - 2.00 No 18%
Pole (RSJ of suitable size) out door Sub Station to receive the EB
Supply and to distribute to the two transformers with all supporting
members, pin insulators, disc insulators, '0' gauge copper conductor for
the three phases, earthing, etc., including provision for fixing gang
operated AB switches, DO fuses, lightning arrestors etc., complete as
per IE Rules and relevant standards.
734 Supply, delivery and fixing of 11kV, 200Amps, 3 Phase, gang operated, 6.00 No 18%
Air Break Switches, heel mounted in horizontal position with suitable pin
insulators and operating handles with locking arrangements etc.
735 Supply, delivery and fixing of 11kV, 3 Phase, Horn gap fuses in the 2.00 No 18%
incoming side of the 11 kV supply with earthing
736 Supply, delivery and fixing of 11kV, 15Amps, 3 Phase, Drop out fuses 4.00 No 18%
for the 11 kV supply feeding the two transformers with earthing
including the rod for replacement of the fuse from the ground etc.,
complete.
737 Supply, delivery and fixing of lightning arrestors suitable for 11 kV 6.00 No 18%
system and suitable for fixing on steel structure.
740 Chain link fencing with gate including the TNEB 2 poles Spreading of 2.00 No 18%
materials as per CEIG requirements
741 Designing and preparation of CEIG drawings, obtaining Approval and 2.00 No 18%
safety certificate including submission of Completion report and
rectification report.
745 Fabrication supply and fixing of HT metering box to accmodate the 2.00 No 18%
TNEB meter including earthing and necessary civil works as instructed
by the site engineer
746 Supply, delivery, erection, testing and commissioning of non-clog
submersible sewage pumpset with following duty point, driven by 3 Ph,
415 V, AC, 50 Hz, Electrical Motor with suitable weather proof cable
(Copper ) of total length of 20 m, control panel, Pedestal Coupling,
required length of guide wire / guide pipe, M.S.(GLVD) lifting chain,
necessary level controlling probes with sufficient length of armoured
copper LTUG cable to connect the probe from the junction box to the
control panel, fasteners including laying of pump cable under ground
with suitable conduit and clamping on walls in trays and incidental civil
works etc.complete.
757 Grit Pump - 500 lpm against a total head of 9 m 6.00 No 18%
768 Supply and fixing of Triple pole fuse carrier in MS sheet steel encloure
with provision for accomadating the TNEB meter including earthing etc.,
complete
769 32Amps Triple Pole fuse carrier 1.00 No 18%
773 Supplying and fixing of following capacity Triple Pole SFU with HRC
fuses on suitable angle iron frame with earth connection only.
774 32Amps Triple pole SFU with HRC fuses 1.00 No 18%
775 63Amps Triple pole SFU with HRC fuses 3.00 No 18%
776 100Amps Triple pole SFU with HRC fuses 1.00 No 18%
777 300Amps Triple pole SFU with HRC fuses 2.00 No 18%
778 Supply, delivery, erection, testing and commiossioning of floor
mounted M.V.panel with aluminium bus bars and consisting of the
following accessories with necessary interconnections between
busbars, switches and trunking box, measuring instruments such as
voltmeters,ammeters with selectorswitches, energy meter,phase
indicating lamps, etc., complete with incidental civil works &
constructing concrete plinth for MV Panel above MFL and comprising of
following and as per specifications and drawing:
795 32 A TPN MCB 10kA (for LDB & PLC) 1.00 No 18%
804 32 A TPN MCB 10kA (for LDB & PLC) 1.00 No 18%
821 32 A TPN MCB 10kA (for LDB & PLC) 1.00 No 18%
822 Capacity of M.V. Panel - 300 Amps (SPS-06)
830 32 A TPN MCB 10kA (for LDB & PLC) 1.00 No 18%
851 From 32 Fuse Carriers to 32 Amps SFU & from there to 32 Amps
MCCB Switch of MV panel (Wall)
857 From 32A MCB of MV Panel to LDB and PLC Panel (Wall) 30.00 m 18%
size 2 core 4 sq.mm
858 From control Panel of Pump to Local P.B. Station and for PLC signal 100.00 m 18%
cables
size 3 core 2.5 sq.mm copper (Under ground)
859 From 63 Fuse Carriers to 63 Amps SFU & from there to 63 Amps
MCCB Switch of MV panel (Wall)
860 size 3.5C, 25 Sqmm 20.00 m 18%
866 From control Panel of Pump to Local P.B. Station and for PLC signal 200.00 m 18%
cables
size 3 core 2.5 sq.mm copper (Under ground)
867 From 100 Fuse Carriers to 100 Amps SFU & from there to 100 Amps
MCCB Switch of MV panel (Wall)
879 From 32A MCB of MV Panel to LDB and PLC Panel (Wall) 50.00 m 18%
size 4 core 10 sq.mm
880 From control Panel of Pump to Local P.B. Station and for PLC signal 150.00 m 18%
cables
size 3 core 2.5 sq.mm copper (Under ground)
893 From 32A MCB of MV Panel to LDB and PLC Panel(Wall) 50.00 m 18%
size 4 core 10 sq.mm
894 From control Panel of Pump to Local P.B. Station and for PLC signal 200.00 m 18%
cables
size 3 core 2.5 sq.mm copper (Under ground)
895 From transformers to the MV Panel
907 From 32A MCB of MV Panel to LDB and PLC Panel(Wall) 50.00 m 18%
size 4 core 10 sq.mm
908 From control Panel of Pump to Local P.B. Station and for PLC signal 200.00 m 18%
cables
size 3 core 2.5 sq.mm copper (Under ground)
909 From 63 Fuse Carriers to 63 Amps SFU & from there to 63 Amps
MCCB Switch of MV panel (Wall)
910 size 3.5C, 25 Sqmm 15.00 m 18%
921 From 32A MCB of MV Panel to LDB and PLC Panel (Wall) 50.00 m 18%
size 4 core 10 sq.mm
922 From control Panel of Pump to Local P.B. Station and for PLC signal 150.00 m 18%
cables
size 3 core 2.5 sq.mm copper (Under ground)
923 From 300 Fuse Carriers to 300 Amps SFU & from there to 300 Amps
MCCB Switch of MV panel (Wall)
936 From control Panel of Pump to Local P.B. Station and for PLC signal 150.00 m 18%
cables
size 3 core 2.5 sq.mm copper (Under ground)
937 From 300 Fuse Carriers to 300 Amps SFU & from there to 250 Amps
MCCB Switch of MV panel (Wall)
949 From 32A MCB of MV Panel to LDB and PLC Panel (Wall) 50.00 m 18%
size 4 core 10 sq.mm
950 From control Panel of Pump to Local P.B. Station and for PLC signal 150.00 m 18%
cables
size 3 core 2.5 sq.mm copper (Under ground)
951 Supplying and fixing of cable gland and termination with Al. cable
lugsfor the following sizes of PVC insulated PVC sheathed armoured
alumunium LT UG cable and with earth connection.
1018 Supply delivery and fixing of out door weather proof junction box
fabricated in MS sheet steel (12 SWG for front 14 SWG for other sides)
near the suction well for terminating the Pump power cable and control
cable on an angle iron frame at convenient height for working and
above the local MFL with provision for terminal block & earthing as per
IS including incidental civil works etc.,complete.
1022 Supply delivery and fixing of out door weather proof junction box
fabricated in MS sheet steel (12 SWG for front 14 SWG for other sides)
near the suction well for terminating the Pump power cable and control
cable on an angle iron frame at convenient height for working and
above the local MFL with provision for terminal block & earthing as per
IS including incidental civil works etc.,complete.
1024 Supply, delivery and fixing of out door wheather proof Local Push 27.00 No 18%
Button station in the compartment provided in the Junction Box with 1
No"ON" and 1 No "OFF" push buttons (the "OFF" push button shall be
locable in "OFF" position).
1025 Supply, delivery and erection of Single Phase 6 way 3.00 E 18%
16 Amps, 10kA LDB with the following:
1 No. of 16A, DP RCCB
4 Nos of 6A, SP MCB
in sheet steel enclosure fitted with busbars and neutral links and
suitable angle iron frame works with provision for earthing etc.
complete.
1026 Supply, delivery and erection of Three Phase 6 way 32 Amps, 10kA 6.00 E 18%
LDB with the following:
1 No of 40 A FP isolator for incoming supply
3 Nos. of 16A, DP RCCB
3 Nos. of 16A, SP MCB
1 No of 16A, DP MCB
3 Nos of 6A, DP MCB
in sheet steel enclosure fitted with busbars and neutral links and
suitable angle iron frame works with provision for earthing etc.
complete.
1027 Run of 2 of 2.5 sq mm PVC unsheathed aluminium single core cable in 675.00 m 18%
PVC pipe for mains with continuous earth connection by 14 SWG wire
From the MCB DB to the Switch boards in office, store,and 16A power
socket.
1028 Wiring with 2.5 sq mm PVC insulated single core aluminium cables of
650 V Grade on suitable rigid PVC pipe on wall and ceiling with PVC
accessories, with MS switch box covered with 3 mm thick hylam sheet
with continous earth wire connection of 14 SWG TC wire.
1029 Light points 92.00 Pt 18%
1031 Wiring with 2.5 sq.mm PVC unsheathed A1. single core cable on 9.00 E 18%
suitable rigid PVC pipe for 5A 3 pin CS plug non interlocking including
supply and fixing of plug pin top in MS box with continuous earth
connection by 14 SWG TC wire.
1033 Supplying and fixing of box type 4’ 20W single LED fitting complete with 58.00 E 18%
TW round block and tube on ceiling or wall with connection.
1034 Supplying and fixing of 18 Watt LED lamp with round type LED Troffer 17.00 E 18%
recessed mounted fitting complete.
1035 Supplying and fixing of 12" sweep AC exhaust fan complete including 17.00 E 18%
providing necessary opening in the wall.
1036 Supply and fixing of 48" sweep AC ceiling fan complete with regulator 6.00 E 18%
with lm down rod (stem pipe) including supplying and fixing of fan
clamp with side plates and cross arms.
1037 a)Supply and erection of 1 No 3" dia 2 m long tubular Wall Mounted 18.00 Set 18%
post with complete 120W LED lamp with necessary fitting and other
accessories etc.
1038 Supplying and clamping of PVC , LTUG cable by M.S.clamps on wall 255.00 m 18%
for 2 core 4 sq.mm
1039 Suppling and fixing of cable gland and termination with earth connection 54.00 jt 18%
for 2 core 4 sq.mm
1040 Supplying and fixing of 15 amps, single phase, DP SFU switch with 9.00 E 18%
F&N on suitable TW Board with earth connection only
1041 a) Supply and erection of 1 No 3" dia 5 m long tubular Pole Mounted 18.00 Set 18%
post with complete 250W sodium vapour lampwith necessary fitting and
other accessories etc.
1042 Supplying and laying of PVC , LTUG cable under ground in a trench to 500.00 m 18%
be excavated at a depth of 2 ½ ' putting 6” layer of sand and covering
the cable with brick and sand refilling the earth to make good as
directed for 2 core 4 sq.mm
1043 Supplying and clamping of PVC , LTUG cable by M.S.clamps on wall 150.00 m 18%
for 2 core 4 sq.mm
1044 Suppling and fixing of cable gland and termination with earth connection 48.00 jt 18%
for 2 core 4 sq.mm
1045 Supplying and fixing of 15 amps, single phase, DP SFU switch with 6.00 E 18%
F&N on suitable TW Board with earth connection only
1046 Supply and delivery of the following safety equipment 9.00 No 18%
a) 5 kg capacity ISI marked dry chemical powder type fire extinguisher
1055 Ring spanner set of size in mm 6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 4.00 Set 18%
18x19, 20x22 20x23 24x27, 25x28 & 30x32.
1058 Megger kit (1000 V, 200 M ohm) with leather case 2.00 E 18%
1059 Tong Tester ( clamp on type- multiutility) 6.00 E 18%
A C voltage 0 - 750 V
AC current 0 - 1000 A
D C voltage 0 - 1000 V
Resistance 0 - 40 mega ohms
1062 Measuring Dip Rod (MS) (for measuring 200 ltr. standard Barrel ) 6.00 E 18%
1065 Supply and delivery of Rechargeable emergency lamp with 600mm 9.00 E 18%
Fluorocuent lamp, dry type rechargable battery etc.,complete.
1066 Earthing as per ISI specifications with necessary masonary work 48.00 E 18%
1070 Supply, Delivery, erection, testing and commissioning of PLC Control 4.00 E 18%
Panel including the Remote Terminal Unit/ Programmable Logic
Controller (RTU/PLC), Human Machine Interface (HMI), GPRS modem,
1 kVA UPS and accessories along with mounting assembly & cables
including installing the PLC programming package and interconnecting
with the existing SCADA System at Centralized Monitoring Location
(the software will be provided by CMWSSB) as directed by Engineer
and interconnecting with the ultrasonic level transmitters,
electromagnetic flow meters and with existing MV panels, Capacitor
panels at each sewage Pumping Station to switch ON/OFF the pumps
based on level feedback, Switch ON/OFF the existing capacitor bank to
maintain Powerfactor as per EB norms, and to monitor EB/ DG supply
including incidental civil works etc., complete.
1071 Supply, Delivery, erection, testing and commissioning of Ultrasonic 4.00 E 18%
Level Transmitter of range 0 - 15 meters in the collection well with
necessary mounting arrangements including incidental civil works etc
complete.
1072 Operation and maintenance of the installation: Operation and 360.00 day 18%
maintenance of the plant with all auxiliary equipment for a period of 120
days after satisfactory supply, erection , commissioning and operating
the entire plant for 30 days, free of cost by the contractor before
handing over the plant to the Board. ( LS )
1073 Operation and maintenance of the installation: Operation and 480.00 day 18%
maintenanceof the plant with all auxiliary equipment for a period of 120
days after satisfactory supply, erection , commissioning and operating
the entire plant for 30 days, free of cost by the contractor before
handing over the plant to the Board. ( SPS / LT)
1074 Operation and maintenance of the installation: Operation and 240.00 day 18%
maintenanceof the plant with all auxiliary equipment for a period of 120
days after satisfactory supply, erection , commissioning and operating
the entire plant for 30 days, free of cost by the contractor before
handing over the plant to the Board. ( SPS / HT )
1078 Provision of trasparent tank covering with suitable frames and allied 336.00 Sqm 18%
works
1082 Implementation of the Health and Safety Plan:Meetings, health care 1.00 Lot 18%
center, medical check-ups, emergencies and evacuations, safety
protective equipment, hygiene
1083 Accommodation, drinking water, meals and transportat The Bidder shall 1.00 Lot 18%
detail the financial conditions of the supply of accommodation, meals
and transport to its staff:
accomdation, Meals, Transport Accommodation
1084 Training and local recruitment management costs 1.00 Lot 18%
1085 Protection of adjacent areas, biodiversity, prevention of erosion and 1.00 Lot 18%
wastewater management
1086 Traffic, noise and atmospheric emissions management, land take 1.00 Lot 18%
Total in Figures
Quoted Rate in Words
ganallur) in Chennai City
e the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values
15 53 55
0.00 0.00 #VALUE!
812927169.15 #VALUE!
#VALUE!
Please Enable Macros to View BoQ information
Q information