Professional Documents
Culture Documents
35 meter
GEOMETRY
Conc. Stem Height ........... APPLIED LOADS
Stem Thickness Top ........ 8.35 m Uniform Surcharge ........... 5510.0 Kg/m²
Stem Thickness Bot ......... 60.0 cm Strip Pressure .................. 0.0 Kg/m²
60.0 cm Strip 0.6 m deep, 1.2 m wide @ 10.0 m from Stem
Footing Thickness ............ 60.0 cm Stem Vertical (Dead) ........ 0.0 Tn/m
Toe Length ....................... 1.50 m Stem Vertical (Live) .......... 0.0 Tn/m
Heel Length ...................... 0.80 m Vertical Load Eccentricity 15.2 cm
Soil Cover @ Toe ............. 0.00 m Wind Load on Stem .......... 0.0 Kg/m²
Backfill Height .................. 8.35 m OK
Backfill Slope Angle ......... 0.0 deg BACKFILL PROPERTIES
Backfill Density .................. 2000 Kg/m³
SEISMIC EARTH FORCES Earth Pressure Theory ...... Equiv. Fluid
Hor. Seismic Coeff. kh ....... 0.00 Equiv. Fluid Density .......... 505 Kg/m³
Ver. Seismic Coeff kv ........ 0.00 Lateral Pressure Coeff. Ksilo 0.25
Seismic Force Pae-Pa ....... 0.0 Tn/m Active Pressure @ Wall .... 505.0 Kg/m²/m
Active Force @ Wall Pa .... 20.2 Tn/m
Water Table Height ........... 0.00 m
SOIL BEARING PRESSURES
Allow. Bearing Pressure .. 86.7 Tn/m2OK SHEAR KEY DESIGN
Max. Pressure @ Toe ...... 22.8 Tn/m2 Shear Key Depth ................ 100.0 cm
Min. Pressure @ Heel ...... 2.1 Tn/m2 Shear Key Thickness ......... 70.0 cm
Total Footing Length ........ 2.90 m Max. Shear Force @ Key .. 5.0 Tn/m
Footing Length / 6 ............ 0.48 m Shear Capacity Ratio ......... 0.10 OK
Resultant Eccentricity e ... 0.40 m Use vertical bars D16 @ 10 cm Hooked at end
Resultant is Within the Middle Third Moment Capacity Ratio ...... 0.10 OK
1 of 4
RESTRAINED RETAINING WALL DESIGN
2 of 4
RESTRAINED RETAINING WALL DESIGN
3 of 4
RESTRAINED RETAINING WALL DESIGN
4 of 4