You are on page 1of 21

ADITYA

Groundwater, Earthquakes and Landslides


(UNIT-IV)

P Shiva Kumar
Sr. Assistant Professor
Department of Civil Engineering
ADITYA
Unit-3 Outcomes
At the end of the Course, Student will be able to:
CO 1 : Understand the origin, occurrence and
distribution of groundwater.
CO 2 : Understand the causes of earthquakes.
CO 3 : Understand the causes of landslides.
CO 4 : Understand importance of groundwater,
earthquakes and landslides.

Engineering Geology 2
P Shiva Kumar, Sr. Assistant Professor, CE
ADITYA

Contents
Ground Water
Water table, Cone of depression, Geological controls of Ground Water
Movement and types of aquifers, Ground Water Exploration Techniques.
Earthquakes
Terminology, Classification, causes and effects, Shield areas and Seismic
bells, Richter scale intensity, Precautions of building constructions in
seismic areas.
Land Slides
Classification of Landslides, Causes and Effects, measures to be taken to
prevent their occurrence at Landslides

Engineering Geology 3
P Shiva Kumar, Sr. Assistant Professor, CE
ADITYA

Module 1 : Introduction to Groundwater and its

hydrology

Engineering Geology 4
P Shiva Kumar, Sr. Assistant Professor, CE
ADITYA

Introduction to Groundwater and its hydrology.

P. Shiva Kumar
Sr. Assistant Professor
Department of Civil Engineering
ADITYA
Learning Outcomes

At the end of this lecture, Student will be able to:


LO 1 : Understand the origin and occurrence of
groundwater.

Engineering Geology 6
P Shiva Kumar, Sr. Assistant Professor, CE
ADITYA

Hydrology is the study of the distribution and movement of water both on and below
the Earth's surface, as well as the impact of human activity on water availability and
conditions.

Groundwater, water that occurs below the surface of Earth, where it occupies all or part
of the void spaces in soils or geologic strata. Anyhow both surface and subsurface water
are related through the hydrologic cycle (the continuous circulation of water in the
Earth-atmosphere system).

Study of groundwater is more relevant for civil engineers as it concerns in the following
ways:
1. Groundwater as endogenic geological agent in weathering and erosion.
2. Groundwater influences the slip produced in fault in subsurface strata.
3. It is one of major reasons for the occurrence of landslides and rock fall.
4. And it is the major source of life, construction, agriculture and industries.

Engineering Geology 7
P Shiva Kumar, Sr. Assistant Professor, CE
ADITYA

Engineering Geology 8
P Shiva Kumar, Sr. Assistant Professor, CE
ADITYA

Engineering Geology 9
P Shiva Kumar, Sr. Assistant Professor, CE
ADITYA

Use of water in various purposes 1 gallon = 4.54 litres

Engineering Geology 10
P Shiva Kumar, Sr. Assistant Professor, CE
ADITYA

Water Table the level below which


the ground is saturated with water.

Water bearing properties of rocks

1. Aquifers as both porosity and


permeability
2. Aquitards as porosity with limited
permeability
3. Aquicludes as porosity and no
permeability
4. Aquifuges as neither porosity not
permeability.

Types of Aquifers

1. Confined
2. Unconfined
3. leaky

Engineering Geology 11
P Shiva Kumar, Sr. Assistant Professor, CE
ADITYA
Cone of depression\ exhaustion

Engineering Geology 12
P Shiva Kumar, Sr. Assistant Professor, CE
ADITYA

Types of groundwater

Zone of aeration Zone of saturation


Soil water Unconfined or free groundwater
Pellicular water ( percolating water Confined water
stick to voids )
Vadose water (gravity water) Fixed groundwater( not influenced by
gravity)
Perched water (water in clay Connate water (origin of rock)
formations)
Capillary water Internal water (very deep in the
interior of the earth)
Juvenile water (Magmatic water)

Engineering Geology 13
P Shiva Kumar, Sr. Assistant Professor, CE
ADITYA
Geological controls of Ground Water Movement

Groundwater movement in the zone of aeration is not much influenced by gravity and
topographic factors, while in zone of saturation the influencing factors are of geological
concern.
They are:

1. Permeability of rocks.
2. Presence of fractures.
3. Attitude of bedding of the formations.
4. Buried river channels.
5. Presences of impermeable formations like dolerite dykes and sills, salt plugs.
6. Difference in water table levels between each cone of depression and as well as
between various geological formations based on type of material ( clayey formations
and confined formations).

Engineering Geology 14
P Shiva Kumar, Sr. Assistant Professor, CE
ADITYA
Ground Water Exploration Techniques

The purpose of exploration is to detect the indirect indicators (subsurface aquifer formations) and
locate the potential zones for exploitation (extraction of groundwater). The main geophysical
methods which are useful in solving some of the problems of hydrogeology, are the Electrical, Seismic,
Gravity, and Magnetic methods.

There are two wats of conducting the investigation of an area; preliminary and final investigations.

There are three kinds of geophysical investigation of groundwater


They are:
Geological investigations:
1. Study of rock types
2. Study of topography
3. Study of weathering
4. Study of geological structures
5. Study of intrusive rocks
6. Geological mapping of the area after field study (marking of identified formations)

Engineering Geology 15
P Shiva Kumar, Sr. Assistant Professor, CE
ADITYA

Hydrological investigations
1. Study of water table
2. Study of surface water bodies
3. Study of springs and seepages
4. Quality of water
5. Study of rainfall and climate
6. Pump tests

Geophysical Investigations
The geological and hydrological investigations will give only limited amount of information, while
the remain information is forbidden due to soil cover, vegetation etc.,.

Geophysical investigations are much more reliable in such cases as the methods can be applied
both on surface and subsurface of the crust.

The most commonly used geophysical method is electrical resistivity method as it give information
in the form of profiling and sounding of the formations.

Engineering Geology 16
P Shiva Kumar, Sr. Assistant Professor, CE
ADITYA

Water Logging
Effects of excess of use of groundwater or
over tapping

1. Excavation of open wells or drilling


of bore wells near to each other can
effect in drastic decrease the yield of
groundwater.
2. Saline water intrusion.
3. Water scarcity
4. When groundwater is overused, the
lakes, streams, and rivers connected
to groundwater can also have their
supply diminished.
5. Land subsidence occurs when there is
a loss of support below ground.

Engineering Geology 17
P Shiva Kumar, Sr. Assistant Professor, CE
ADITYA

Summary

After completion of module 1 the student is now able to understand the


origin, occurrence and distribution of groundwater.

Engineering Geology 18
P Shiva Kumar, Sr. Assistant Professor, CE
ADITYA

Engineering Geology 19
P Shiva Kumar, Sr. Assistant Professor, CE
ADITYA

Summary

From this unit – 2 students are now able illustrate and


understand the occurrence of minerals and rocks,
their identification.

Engineering Geology 20
P Shiva Kumar, Sr. Assistant Professor, CE
ADITYA

Thank you

Engineering Geology 21
P Shiva Kumar, Sr. Assistant Professor, CE

You might also like